Printable Version of Topic

Posted by: Geezer914 Oct 1 2009, 03:13 PM

Anyone install a set of Automobile Atlanta 914-6 springs? I ordered a set of 100 lb springs and they sent me a set of their own springs.. George said they were better and would not effect the ride height like the 100 lb springs.

Posted by: dr914@autoatlanta.com Oct 1 2009, 03:25 PM

yes we have many times. They are stock height and 914-6 spec. Heavier than the stock 914 but to retain the stock height of the car. Not good with kyb as kyb shocks lift the car and it then looks too high.

Posted by: Ferg Oct 1 2009, 03:34 PM

George, I may be going out on a limb here, but I think he's looking for a opinion other than yours

Posted by: tat2dphreak Oct 1 2009, 03:43 PM

Posted by: 6freak Oct 1 2009, 03:46 PM

Sorry George but that was funny as hell ...good one Ferg

Posted by: tod914 Oct 1 2009, 03:53 PM

I had installed a pair on a 74 2.0. Ride height was 4 3/4 inches from the top edge of the wheel to the fender lip. Hopefully that helps.

Posted by: 9146986 Oct 1 2009, 07:46 PM

KYB = kill yer back

Posted by: tod914 Oct 1 2009, 08:03 PM

Just wanted to add, they were on Boge shocks. Think Bilsteins with the adjustable perches would be better suited for these springs than Boge.

Posted by: Gint Oct 1 2009, 08:47 PM

Posted by: Geezer914 Oct 2 2009, 07:21 AM

I have the Bilstein shocks ready to install. So this combination will be a big improvement over the stock set up?