1972 914/6 conversion with a lot of custom stuff,i lost my storage space and can not work on the car any longer+ i am leaving the country in may
windshield is cut 4 inch,roll bar is modified ,no door windows,flares are FG and is the whole fenders not just the flares,no windshield wipers,oil tank in the front trunk with the lines running trough the header tubes,ss-fuel lines,floors and trunks are treated with wurth SKS,elefant bushings all around,koni struts in front with 3.5 bold spacing ,S-calipers,19mm t-bars,rears are 911 rear calipers with 911 disk and e-brake set up (not completed jet),porterfield brake pads all around,koni yellow in the rear with adj.coilovers #175 springs ,engine is original /6 case with 40k miles on the bottom end and a fresh top end,has 84mm piston and cylinders(2.2l)and zenith carbs,engine is runnuing but needs final adjustment ,transmission is original /6 trans with a fresh rebuild,m&k muffler,wheels are 8&9x16 ronal R9 powder coated semi gloss black with new dunlop star spec tires 225/50/16,
the hoods and doors need to be painted(you get enough paint to do the car),bill of sale only,i have more pictures of the car build if needed
$7914.00 OBO
ps:i am also open for trades as long its a 914 in original condition to take with me to germany
Attached image(s)
more stuff
Attached image(s)
all this is ingl. with the sale
Attached image(s)
"bill of sale only"
no pink slip?
thanks. Dave
If I find a place for you to store it and work on it, will you stay in the US?
Man that'd be a great project car base....hell those seats would look killer in my 356!
I'll give you $3000 for it.
oh sure ,i take the black car and $3000
Cool "rat rod" Thomas!
Stick around and finish it!!!
I've seen this car and it's progress over the last year and half, the craftsmanship is second to none. Thomas' description nor the photos do this car justice. The attention to detail is amazing, almost every single part installed on that car is either NOS or completely rebuilt. The S calipers were hand polished and re-anodized, new stainless pistons etc, all new bearings, a really cool one-off all stainless muffler, custom stiffening throughout, all steel headlight delete front hood (provision for headlights to be mounted separately), all suspension parts have been powder coated, original 6 transmission completely rebuilt, brand new (just mounted a month ago) Dunlap tires... the list goes on and on. The chopped windshield gives the car a really aggressive look, the rear targa bar was also modify to match the new height of the windshield, kind of like the new Porsche Speedster, this is a fair weather car that just needs to have the final assembly complete. The engine runs perfectly, brakes are hooked up and bled, clutch cable hooked up etc... Really cool project for the right person, if you're interested, start a dialog with Thomas, he'll fill you in on all the details...
Dan
Seen this when Thomas was working on it. Someone is gonna get a great car
OK, I can't help myself, I am interested and have sent a couple PM's
jonathan
hwgunner
You have an IM.
sale is pending
I paid today
Keep us posted on the progress. Very interesting.
Coooooool, can't wait to see how it all ends up.
Can't wait to see how you finish it out!
I can't wait either. Just got off the phone with Rufino the glass guy and it sounds like he is going to try and install the front Windshield on Monday or Tuesday if he can get it worked out with Thomas as far as time goes. If that is the case i may go down Wednesday or Thursday and pick it up. Will drop it straight off at the painters to ge the doors, hoods and rockers painted.
Hmmm, looks like a trip to LaLa Land is in my future.....
I love the idea of a rat rod 914! Minimal & animal!
You'll need to do a progress thread on this car, I've been impressed with Thomas's cars.
Just spoke to Rufino about the glass. He has it all cut to match the template he made on Monday, thanks Thomas for sticking around as long as you did, and is going to install on Friday. All that for the grand total of ............... $375!!!!!!!!
BAM now that is what I call a deal!!!
Awesome Jonathan! You need to start up a progress thread over in the 'Garage'!
Rufino is one of the best glass guys in So Cal. He's done a ton of 914s and takes a lot of pride in his work. And the prices are very reasonable
Windshield looks tight! You HAVE to do a build thread on finishing up this car!
Well, mark and i made a trip to LA and back yesterday. Drop off some stuff at fat performance and picked up the car from Thomas. Here is a picture after getting it home.
Now the real work begins.
jonathan
hwgunner
This is gonna be one cool car! THOMAS does nice work.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)