Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WANTED: 914 Cars and Rollers _ 74 gt flared roller for sale (sold)

Posted by: mrdkrantz Oct 30 2011, 12:21 PM

Selling my 1974 914.

Basic specs:
-glass flares
-glass nose
-Raised letter rockers
-Ats wheels new tires
-clean interior
-fairly clean all over
-Had a 1911cc motor with dellortos (not being sold with)

What it needs to be complete:
-Motor
old not worth it
-new pass side engine shelf
I cut it out to replace
-patch rust on pass engine mount
needs a patch made and welded in
-patch rust on inner rear fender by battery
i rivited pieces in but it should be done right.
it was a temp thing while i was still driving it
-finish fuel system
fuel tank pulled cleaned up
filter and pump mounted in front trunk
aluminum line run through tunnel

Rusty areas
-rear trunk(surface)
-pass engine mount (need a patch)
-inner pass rear fender by engine (needs patch)
-pass engine shelf (need new piece)


I bought the car in 2000 and used it as my first car. I put the flares on had it painted etc. In the past year it has sat with no motor in it and I have been slowly working on it. ( I pulled the motor because it never sat its rings properly tore up the piston/cylinder etc. I already sold the dellorto carbs that were on it) I redid the interior a bit. Removed the tar floor stuff primed and painted it. Repaired the inner pass rocker. and other stuff. I am just tired of working on it and lost interest. I have the transaxle and and full stainless heat exchangers, good original front bumper with pad and Im sure other stuff if I dig.

let me know $1500 for all

located in Salisbury, MD

Dale
Attached Image
Attached Image
Attached Image

Posted by: chuckc Nov 14 2011, 08:04 PM

Hi there,
You may have better luck if you post pics of all those. Rusty areas.
Peace,
Chuck

Posted by: OU8AVW Nov 15 2011, 03:21 PM

Zap me some more pictures. I'm in Annapolis and may be interested.
Mike@southboundcruising.com

Posted by: mrdkrantz Dec 4 2011, 06:43 PM

pics of rust
Attached Image
Attached Image

New price needs to go before winter.
$1,000 takes it


Posted by: porsha916 Dec 5 2011, 08:59 AM

hi Dale, I am interested also !


Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)