Printable Version of Topic

Posted by: bill pierce Dec 4 2013, 09:26 PM

Up for sale is my 914 project. 1970 that has a 2.0 engine that as very few miles since rebuild (2056cc). The heads were done at a local shop using Porsche valves.

The hell hole is much worse than I thought it would be when I started in. So I just don't have the motivation to finish this project.

I will consider parting the car but the engine will be sold complete with the factory F.I.

Call Bill at 509-291-6752 or 509-879-8185. Please note that some of these pictures were taken before I started stripping the paint off the car.

http://s218.photobucket.com/user/billpierces/media/IMG_0015.jpg.html

http://s218.photobucket.com/user/billpierces/media/IMG_0020.jpg.html

Posted by: etcmss Dec 5 2013, 12:00 PM

is there a price?

Posted by: bill pierce Dec 5 2013, 05:05 PM

I was hoping to get about 1500 for the whole works. We have over 1000 just in the heads. Engine runs great. The transmission has a bit of a whine in high gear but shifts well (for a 914)

I don't really want to part with the car, but I totaled my DD a week ago and have a pile of hospital bills.

Posted by: 914_teener Dec 5 2013, 11:35 PM

Can you post some pics of the engine?

Thanks.

Posted by: bill pierce Dec 7 2013, 05:01 PM

OK here are a few more pictures

http://s218.photobucket.com/user/billpierces/media/914004_zps39cf8035.jpg.html

http://s218.photobucket.com/user/billpierces/media/914016_zpsbc9bfcd4.jpg.html

http://s218.photobucket.com/user/billpierces/media/914015_zps285e4e67.jpg.html