Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WANTED: 914 Cars and Rollers _ 1973 914 (6) full and fresh nut and bolt restoration

Posted by: adiokyro Aug 9 2015, 10:35 PM

hello this is a freshly restored and rodded 1973 914 2.0. It now has a fresh 2.7 with head work, 'e' cams, and triple throat webers. it is clean clean clean clean.
every bolt was removed, all rust cut out and fresh metal welded in, chassis stiffened, full body inside and out epoxy sealed and them coated in PPG enviro base multi stage Porsche factory 'lime green'. undercarriage, engine compartment, etc coated in same paint but with rock chip additive. the body was all done in metal, there are zero dents of any kind. there are some subtle mods, things shaved, etc done to the body, all in metal.
all 911 front suspension with elephant racing sphericals, fully adjustable strut tops, koi adjustable struts, 911 drilled vented rotors aluminum fully restored pmb 911s calipers, all parts freshly powedercoated, the bottom of the car looks just as good as the top. out back are ground control adjustable coilovers, koni externally adjustable shocks, pmb freshly restored 916 aluminum calipers. as well as patrick motorsports boxed trailing arms.
transmission is close ratio with 'm' and 's' gears, guard limited slip, and a billet intermediate plate.
wheels are fully restored polished 16x6 fuchs.
all latches have been replated. all chrome is either brand new or freshly replated. glass is new all rubber new.
intereior is totally insane all new fiberglass panels covered in alcantara, including the dash. the door cards and seats are black leather with thick german houndstooth inserts. it has RS straps for the inside door latches and the interior is stripped and spartan.
the car is totally insane. have about 120k into it. id say thats conservative.
it needs to go to a 914 lover. more pics and info to come. taking offers in the 30k range.
cheers








Attached thumbnail(s)
Attached Image Attached Image Attached Image Attached Image

Attached image(s)
Attached Image Attached Image

Posted by: mepstein Aug 10 2015, 05:47 AM

Looks like an amazing build at an almost giveaway price. I would show some pics of the engine, trunks and under the car. I'm sure they looks as nice as what you've shown already. GLWTS.

Posted by: Nemisus Aug 10 2015, 09:04 AM

Ive seen this car in person!

At 30k price range who ever gets it will not be disappointed!

However corny this might sound... this car gave me goose bumps when I first layed eyes on it!

GLWS!

Cheers

Nemi

Posted by: jss297 Aug 10 2015, 11:48 AM

PM Sent

Posted by: Cairo94507 Aug 10 2015, 07:46 PM

PLEASE post more pictures of this beautiful car. I really like what I see so far. GLWTS!

Posted by: sb914 Aug 11 2015, 07:17 AM

I wish I had the green back$,someone needs to grab this car (quick)

Posted by: iwanta914-6 Aug 11 2015, 07:51 AM

I'm sure people would love to see pics from the restoration process too.

Anyone have $30k to loan me interest free? tongue.gif

Posted by: Nemisus Aug 11 2015, 09:01 AM

in a perfect world I wouldn't have bought the rust bucket 74.... then wouldn't of had to locate a nicer tub replace the 74! Then I might be able to afford this beauty.... key world might and not realistic!

Although if none of the previous two didn't happen, I would have never seen this car in the first place... hissyfit.gif At least I have an idea on what I'd like my car to look like. That interior just pops!

BUMP for sale of a real nice car!

Posted by: Cuda911 Aug 11 2015, 10:44 AM

Are the door panels back in? (Looks like they are out in one of the pix, but I think that pic is during the rebuild). Do you have any dyno data? Do you still have the chrome trim for the sail panel area? Is the top original or painted body color?

Thx.

Posted by: napasteve Aug 11 2015, 10:52 AM

This is a very nice car. I watched Mark and Tim build it. Incredible work. Here is a pic of the car at the paint shop (Altissimo Restoration in American Canyon):

Attached Image

Here is a jack point pic at Original Customs:

Attached Image

Posted by: 914 iv Aug 11 2015, 11:09 AM

Very nice 914. Are photo's of build im asking because door panels missing and no seat belts.

Posted by: adiokyro Aug 11 2015, 02:24 PM

hello-
thanks for your nice comments--the car is totally complete----interior was completetly finished by aces high in santa rosa--door panels are installed and RS straps functional.
i do have some pics from the resto process--i will dig those up---i will also take detailed pics of entire car and post them in about a week--ive sent the car in for a PPI/ comb over, so right when it gets back---
but thank you very much for the kind words, it was a tough process

Posted by: adiokyro Aug 12 2015, 08:22 PM

people seem like they want a cost breakdown here is a general one with $$ im sure left out:

Car: 6500
Strip-down, rust repair, chassis stiffening: 12000
Media-blasting/metal work/paint: 20000
Full drivetrain 20000
Assembly/dialing in labor 30000
Suspension/brakes/wheel Parts: restored polished fuchs , tires, fully refurbished 911 suspension, brakes, Patrick trailing arms, 5 lug conversion, all bearings/brackets/nuts/bolts/ground control rear/pmb restored 911 ā€˜sā€™ calipers
12000
interior parts and labor: 8500
exterior parts/chrome/lights: 7000

The whole thing was an unpleasant experience for me so perhaps that's why i would sustain such a loss---still i am hesitant to sell--but right person/right money will decide
cheers


Posted by: Cuda911 Aug 12 2015, 10:31 PM

Why do you say "unpleasant"? Must have been a work of love, I would guess.

Curious, why would you do all that work and spend all that $$ and then want to sell it?

Anyway, I may be interested in the car. I'd make a few mods though.

Posted by: matthepcat Aug 12 2015, 10:40 PM

OK I will revise this comment. Beautiful car, great build, thing of passion to build to this cost on a non-6 chassis. Please charge more.

Someone is certainly getting a steal if the project cost was as advertised.

Posted by: 87m491 Aug 13 2015, 02:42 AM

And yet it seems like you already did....

QUOTE(matthepcat @ Aug 12 2015, 08:40 PM) *

Umm.... no comment.


Posted by: adiokyro Aug 13 2015, 04:07 PM

QUOTE(87m491 @ Aug 13 2015, 01:42 AM) *

And yet it seems like you already did....

QUOTE(matthepcat @ Aug 12 2015, 08:40 PM) *

Umm.... no comment.


there's always some f on forums

Posted by: adiokyro Aug 13 2015, 04:42 PM

QUOTE(Cuda911 @ Aug 12 2015, 09:31 PM) *

Why do you say "unpleasant"? Must have been a work of love, I would guess.

Curious, why would you do all that work and spend all that $$ and then want to sell it?

Anyway, I may be interested in the car. I'd make a few mods though.


Oh i suppose you are correct--Id say it was both for a lot of reasons--inherent to the car hobby is passion, excitement, disapointment, anger, frustration, happiness, and so on.
i was not being sharp enough and was ripped off a few times in the 2 year process--so im a little bitter is all. id say yes there are a few mods that would be nice---
bottom line is that its an awesome car.

Posted by: dpires914 Aug 13 2015, 05:47 PM

Beautiful car. I'd say hold on to it and enjoy it. Values have been increasing. If your restoration is really well documented, I'd say that there is someone out there with deep pockets. And then there is the European market. 30K seems really low. Just my $.02. Good luck with the sale.

Posted by: Mblizzard Aug 13 2015, 06:12 PM

Dude! Green is not my color but if I had i,t I would hand you $30k right now! A work of art!

Posted by: Cairo94507 Aug 13 2015, 08:27 PM

That $30K would cost me a butt-load more when my wife pulled into the garage and saw it sitting there and realized it was not my Six.... Despite that I had an argument with myself trying to convince myself that at that price, I could just not say no. Then reality set in...without a home I would be sleeping in it and have no place to park my Six. blink.gif

Damn it - I forgot and commented on a FS add. Sorry beer.gif

Posted by: adiokyro Aug 15 2015, 06:40 PM

QUOTE(dpires914 @ Aug 13 2015, 04:47 PM) *

Beautiful car. I'd say hold on to it and enjoy it. Values have been increasing. If your restoration is really well documented, I'd say that there is someone out there with deep pockets. And then there is the European market. 30K seems really low. Just my $.02. Good luck with the sale.

thank you!!! appreciate it! its true when i drive it I'm thinking 'I'm selling this why?'

Posted by: adiokyro Aug 15 2015, 06:41 PM

QUOTE(matthepcat @ Aug 12 2015, 09:40 PM) *

OK I will revise this comment. Beautiful car, great build, thing of passion to build to this cost on a non-6 chassis. Please charge more.

Someone is certainly getting a steal if the project cost was as advertised.

thanks dude ; )


Posted by: adiokyro Aug 15 2015, 06:41 PM

QUOTE(Mblizzard @ Aug 13 2015, 05:12 PM) *

Dude! Green is not my color but if I had i,t I would hand you $30k right now! A work of art!

thanks!!

Posted by: adiokyro Aug 15 2015, 06:43 PM

QUOTE(Cairo94507 @ Aug 13 2015, 07:27 PM) *

That $30K would cost me a butt-load more when my wife pulled into the garage and saw it sitting there and realized it was not my Six.... Despite that I had an argument with myself trying to convince myself that at that price, I could just not say no. Then reality set in...without a home I would be sleeping in it and have no place to park my Six. blink.gif

Damn it - I forgot and commented on a FS add. Sorry beer.gif


hahahahahaha!!! i had a girlfriend when building it and do not now....come to think of it, if your wife leaves you, you could have her move out, hence will have space for both cars.

Posted by: Cairo94507 Aug 16 2015, 10:45 AM

Clearly, you have never met my wife.....

Posted by: Mueller Aug 16 2015, 12:14 PM

Damn that is a nice car, I know we are not supposed to comment on ads!

It is not even my car and I'm pissed that it has not sold at that price!


Anyway, good luck and someone will be getting a killer deal that will make most of us jealous....hmmm, wondering if I have enough junk the garage and office to sell and make $30K+? My Curta calculator, a CNC mill, a lathe, a ?? hahaha






Posted by: adiokyro Aug 24 2015, 11:16 AM

hello everyone--
my apologies for not returning some calls and emails--there are about 3-4 people seriously interested---i should have waited to post the car until AFTER i got it back from the inspection. idea.gif
for now i will just say that we found some 'errors' in the assembly particularly of the suspension. so dropped it back out and reassembled correctly, now am corner balancing etc so it will be 100% awesome.
also, the exhaust diameter did not properly fit the engine and the jetting, so this week proper diameter new headers are going on and i anticipate the car being ready for sale at the end of this week. i also anticipate me driving it all weekend cheer.gif
best is probably to text me 510-205-9539
a lot of questions about what 30k range means, which is understandable.
it means "30k and above" offers from cool, friendly, car freaks.
piratenanner.gif

Posted by: RFoulds Aug 25 2015, 05:15 PM

I have told everyone I know ho is looking for a car that this is the one to buy. You can buy it now, or buy it 3 years form now for $55k

Posted by: adiokyro Aug 27 2015, 10:35 PM

QUOTE(RFoulds @ Aug 25 2015, 04:15 PM) *

I have told everyone I know ho is looking for a car that this is the one to buy. You can buy it now, or buy it 3 years form now for $55k


thank you!!! should be available for actual sale tomorrow

Posted by: RFoulds Sep 14 2015, 12:00 PM


[/quote]

thank you!!! should be available for actual sale tomorrow
[/quote]

Is this car still available??

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)