Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WANTED: 914 Cars and Rollers _ EBay Six 22 bids at $85,100 with days to go. .

Posted by: toolguy Feb 8 2016, 09:09 AM

Looks like an L.A. car,
where will this one end up. . Now at $85 large with 6 days to go


http://www.ebay.com/itm/191799462499?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Posted by: mepstein Feb 8 2016, 10:30 AM

It's eBay. Who knows if the bids are even real.

Posted by: matthepcat Feb 8 2016, 01:12 PM

I have seen this car in person. It's stunning.

Posted by: dflesburg Feb 8 2016, 02:15 PM

For that, you could buy a GT4... That's just dumb.

Posted by: RobW Feb 8 2016, 07:14 PM

Reserve not met..... blink.gif

Posted by: AlanG Feb 8 2016, 08:59 PM

Am I mistaken or does this car have euro rear lenses and N.A. front lenses?

Posted by: 6freak Feb 9 2016, 10:27 AM

QUOTE(AlanG @ Feb 8 2016, 06:59 PM) *

Am I mistaken or does this car have euro rear lenses and N.A. front lenses?

you are correct . smile.gif

Posted by: iwanta914-6 Feb 9 2016, 10:33 AM

Reserve isn't even met yet.

Posted by: Kaeferfreund Feb 9 2016, 02:06 PM

QUOTE(iwanta914-6 @ Feb 9 2016, 05:33 PM) *

Reserve isn't even met yet.


Remember: 99k USD was the price when it was offered via the PCA

Posted by: iwanta914-6 Feb 9 2016, 09:23 PM

QUOTE(dflesburg @ Feb 8 2016, 02:15 PM) *

For that, you could buy a GT4... That's just dumb.


I have yet to see a single GT4 for under $100K. Regardless, a GT4 is no vintage Porsche. It's a track day monster.

Posted by: gcrotvik Feb 10 2016, 08:25 AM

I guess anyone can call a car concours quality. Here are some of the few inaccuracies in this restore:

Front hood release sheath was painted body color with the car
Front strut top hardware painted body color with the car
Charcoal filter is missing in front trunk at fuel tank
Rubber mounting buffer is missing for right eyebrow
Wrong style screws holding down the front lower trunk latch (should be hex cap)
No securing clip to hold the front trunk pull cable sheath to the front lower latch
Front sway bar not connected to A arms (I believe all 6's came with front sway bars)
Charcoal breather lines in engine compartment are missing
Wire harness tie down plastic covers, right side against the firewall painted body color
Wire harness in engine compartment, left side against the firewall is painted body color
Rubber buffers for engine cover/lid are not correct (6 sided, not round)
Positive battery cable end is not correct
Negative battery cable is installed upside down
No engine compartment relay board cover
Late 914 filter screen in interior breather tube/hole in left door jamb (but not in right side, which is correct)
Interior light looks to have a black switch, which is not correct
Center cushion is aftermarket Colgan
Late style hand brake lever
Front side marker seals are aftermarket and not even close to the correct profile
Bumpers have not been re-chromed
Rear bumper has a slight dent in it to the right of the license plate
Front and rear deck lids do not fit all that well (may be due to new seals)
Mounting nuts missing on the C in P O R S C H E on the rear engine lid
No plastic/nylon trim caps in rear trunk floor
Incorrect mounting nuts on the 914-6 tail panel emblem
Incomplete tool kit with incorrect tools

The question I would ask, what else is incorrect that you don't see?

Posted by: rhodyguy Feb 10 2016, 12:28 PM

i***m seems to want that car. Chasing the bid. Then you get left hanging. I don't know if it's just the angle but the front hood looks odd in the spring area.

Posted by: 396 Feb 10 2016, 06:08 PM

QUOTE(toolguy @ Feb 8 2016, 07:09 AM) *

Looks like an L.A. car,
where will this one end up. . Now at $85 large with 6 days to go


http://www.ebay.com/itm/191799462499?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT


Car belongs to a shop that restro it for sale.
Owner is a member here.

Posted by: geshaghi Feb 13 2016, 01:08 PM

Car is mine. Thanks for all the feedback and comments. Happy to answer any questions.

Posted by: worn Feb 13 2016, 08:52 PM

QUOTE(396 @ Feb 10 2016, 04:08 PM) *

QUOTE(toolguy @ Feb 8 2016, 07:09 AM) *

Looks like an L.A. car,
where will this one end up. . Now at $85 large with 6 days to go


http://www.ebay.com/itm/191799462499?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT


Car belongs to a shop that restro it for sale.
Owner is a member here.


Looks very nice. I have never been a fan of resetting the odometer at restoration. I have now done a couple full restos where the end result is like the showroom way back then. Despite the big effort, the cars aren't new, and they wear how many miles travelled and years passed in all the nooks and crannies, from rivets to bushings. You can make them better than new, but the years cannot be erased, and that is as perhaps as it should be. My personal preference; I know it is a common practice.
Again, I would happily drive it around and polish it proudly. Glwts guys.

Posted by: Kaeferfreund Feb 17 2016, 01:18 PM

QUOTE(geshaghi @ Feb 13 2016, 08:08 PM) *

Car is mine. Thanks for all the feedback and comments. Happy to answer any questions.


Sold via ebay or not? idea.gif

Could you give us an answer please?

Posted by: geshaghi Feb 17 2016, 03:48 PM

QUOTE(Kaeferfreund @ Feb 17 2016, 11:18 AM) *

QUOTE(geshaghi @ Feb 13 2016, 08:08 PM) *

Car is mine. Thanks for all the feedback and comments. Happy to answer any questions.


Sold via ebay or not? idea.gif

Could you give us an answer please?

Car did not meet reserve and is still available at this moment. Thanks

Posted by: dflesburg Feb 18 2016, 12:16 PM

QUOTE
I have yet to see a single GT4 for under $100K. Regardless, a GT4 is no vintage Porsche. It's a track day monster.


I have a friend who got his gt4 for under 86k and another who paid under 85 for a new spyder.

Posted by: sixaddict Feb 21 2016, 03:18 AM

Just FYI on someone's earlier comment..
All real sixes did not come with front anti sway bars....A 3am install on mine for first track day of my first six .....a 100 years ago dry.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)