Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WANTED: 914 Cars and Rollers _ 73 1.7 with 5 lug conversion

Posted by: ndfrigi Apr 1 2016, 04:58 PM

Hi fellow teeners:

73 1.7 project, it has 5 lug conversion and replica fuch wheels but need to be refinish. The Djet system need to be installed since they were rebuilt by previous owner. Body need some body works and painting. Need metal work also with battery tray and the area beneath it. Original color Signal orange but it was painted with phoenix red.




thank you!

Attached Image

Attached Image

Posted by: ndfrigi Apr 1 2016, 05:01 PM

Attached Image
Attached Image
Attached Image

Posted by: ndfrigi Apr 1 2016, 05:01 PM

Attached Image
Attached Image

Posted by: ndfrigi Apr 1 2016, 05:07 PM

Attached Image
Attached Image

Posted by: ndfrigi Apr 1 2016, 05:52 PM

more pictures

Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Posted by: liebe Apr 2 2016, 10:00 AM

QUOTE(ndfrigi @ Apr 2 2016, 01:52 AM) *

[attachmentid=548630]



Hello sent you an email

Posted by: ndfrigi Apr 3 2016, 12:43 AM

Hi San, I did reply to your personal email with my mobile phone number indicated too.


Posted by: ndfrigi Apr 4 2016, 11:20 PM

bump

Posted by: ndfrigi Apr 12 2016, 12:50 PM

still available for sale

Posted by: Mwp912 Apr 15 2016, 05:00 PM

Other than the battery tray, how is the rest of the pan. Any rust?

What's the title status on both cars?

Posted by: ndfrigi Apr 15 2016, 05:17 PM

QUOTE(Mwp912 @ Apr 15 2016, 04:00 PM) *

Other than the battery tray, how is the rest of the pan. Any rust?

What's the title status on both cars?


73 1.7 has title and No title for the 74 roller.
I will try removing the rocker panel of the 73 to take a picture of the long but if I look at the jack point along the rocker panel hole, it looks okay and even if I look at the under body along the rocker panel/long looks okay. Floor looks clean too and still has the rubber deadening. Battery tray and support needs replacement and small patch needed on the engine side wall/passenger side inner wheel well, maybe 2x2" of metal patch and the "hell hole (pool tub)" upper metal need replacement or just replace the entire passenger side engine tray.

Posted by: Mwp912 Apr 15 2016, 06:06 PM

I'm in San Diego, if wanted to come see the cars, how would we arrange that?

-Mark

Posted by: ndfrigi Apr 27 2016, 01:01 PM

sold

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)