Reduced price to $5000
Assembled from a CA roller and a PA donor. plus many new parts.
Presently in red primer. Had intended to repaint original Malaga Red.
Excellent running 1.8. Trans shifts ok. Goes into 1st easily as long as it hasn't come to a complete stop. If stopped, it will go into 1st from 2nd.
Rebuilt calipers from PMB. Stops great.
All electrics work as they should.
Some rust in hell hole and opposite side. While engine was out I treated these areas with POR15. I intended to pull engine at repaint and have new metal welded in. I removed some of the undercoating from the area just below the rusted sections.
Longs, floor pans, and jack posts are good.
If interested, send me a pm with your email and I will send more photos.
My back just turned 74 and it's now complaining when doing the contortions necessary when working on these cars. I need something higher and automatic. Perhaps a Boxster or Cayenne.
Thanks.. Bill[attachmentid
=600436][attachme
ntid=600439][attachmentid=600441][attachmentid=600442][atta
chmentid=600443][attachmentid=600444][attachmentid=600446][
attachmentid=600447][attachmentid=600448][attachmentid=600449][attachmentid=6004
50]
Attached image(s)
Bump for new price
Bump. Reduced Price.
What part of the world are you in?
Price drop to $5,000.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)