914World.com [Powered by Invision Power Board]

Posted by: KevinW Aug 21 2021, 12:02 PM

It is with a heavy heart that I am listing my project for sale. After a knee replacement this spring and a hip replacement in front of me this fall, I have come to the hard reality that I am capable of finishing my car. The car originated in California and made its way to Minnesota. I have done some rust repair, but for the most part it was solid. I completely disassembled the car, cleaned the parts and put it back together. There is still some assembly requiring. The car is currently in primer. My goal was to build a street able track car. I had the heads rebuilt locally and put 96mm piston and cylinders on the motor. It has 40 weber’s and a crown turbo kit. I did get the motor running but I have not driven it as I has not put any fluid in the brakes yet that have been redone. I have a clear title in my name. I am asking $5,000 for the car. I have all kinds of extra parts including another 2.0 motor that I was going to have built.

Attached thumbnail(s)

Attached image(s)

Posted by: Craigers17 Aug 21 2021, 12:46 PM

Wow...very cool car! GLWT!

Attached Image

Posted by: 930cabman Aug 22 2021, 02:08 PM

Wish I didn't have three, I would be looking close at this one. This will be a great deal for someone

GLWS

Posted by: sholman5 Sep 6 2021, 06:57 PM

Bump. For a car that someone should buy finish and drive. Great starter.

Posted by: 914lover17 Sep 9 2021, 12:01 PM

QUOTE(KevinW @ Aug 21 2021, 12:02 PM)

It is with a heavy heart that I am listing my project for sale. After a knee replacement this spring and a hip replacement in front of me this fall, I have come to the hard reality that I am capable of finishing my car. The car originated in California and made its way to Minnesota. I have done some rust repair, but for the most part it was solid. I completely disassembled the car, cleaned the parts and put it back together. There is still some assembly requiring. The car is currently in primer. My goal was to build a street able track car. I had the heads rebuilt locally and put 96mm piston and cylinders on the motor. It has 40 weber’s and a crown turbo kit. I did get the motor running but I have not driven it as I has not put any fluid in the brakes yet that have been redone. I have a clear title in my name. I am asking $5,000 for the car. I have all kinds of extra parts including another 2.0 motor that I was going to have built.

Not surprised, it looks like you had a pretty sweet project going on, cant wait to see it finished! Best of luck!

Posted by: orthobiz Sep 9 2021, 03:02 PM

Good for you. Keep it "in the family."

Paul

Posted by: worn Sep 9 2021, 08:38 PM

QUOTE(KevinW @ Aug 21 2021, 10:02 AM)

It is with a heavy heart that I am listing my project for sale. After a knee replacement this spring and a hip replacement in front of me this fall, I have come to the hard reality that I am capable of finishing my car. The car originated in California and made its way to Minnesota. I have done some rust repair, but for the most part it was solid. I completely disassembled the car, cleaned the parts and put it back together. There is still some assembly requiring. The car is currently in primer. My goal was to build a street able track car. I had the heads rebuilt locally and put 96mm piston and cylinders on the motor. It has 40 weber’s and a crown turbo kit. I did get the motor running but I have not driven it as I has not put any fluid in the brakes yet that have been redone. I have a clear title in my name. I am asking $5,000 for the car. I have all kinds of extra parts including another 2.0 motor that I was going to have built.

I am a little bit east of you. Say the word and I will happily bring either wrenches or body hammers to help with your project. Say the word. No strings

Printable Version of Topic

Click here to view this topic in its original format