Hi my name is Mark ..........and I have a 914 problem
I have enough that I need to start working on them to thin the heard down. I planned to drop the motor and clean this one up nice and pretty, but let's face it, how much time do I have to spare right now.
With that being said I decided to list it up with the a price that reflects there is some work (like blasting the exhaust and Ceracoating it). The full asking price includes new door panels, with the thermal formed new pockets, new seats in stock pattern. Currently one is correct with some tears in the bolster and the other is a VW pattern that is close but not right.
My full asking price of 22K includes that and repainting the rear deck lid.
I picked up this car in Reno several years ago and it's been a great runner. It's the same one I drove to WCR for the last 3 years+ Bahia red. It has had 3 previous owners, (2 were titled. I have a batch of receipts and the original maintenance dealer book. They show the maintenance with mileage that supports the 135k showing.
This car has had some modifications. Originally a 4 point harness that went through the firewall and had large washers to hold it in
Cary patched these for me and it is back to stock belts.
The car also has drilled rotors on all 4 wheels.
A 10k Tach
a combo Gage on the left with oil pressure.
I'm pretty sure there has been some motor work I'm thinking it went 1911 at some point. I was told that it was being set up for racing, so that would make sense. It may have been balanced in that it starts up and goes right to 1050 RPM. Not 1200 and back down. This is my speculation. It did however dyno out at 76HP at the rear wheels.
The good
New shocks / struts about 5k ago, also new lower ball joints and tie rod ends.
New E-brake cables
Currently adding new door panels (old ones shown included) as well as new seat vinyl to match stock.
New dash - Looks great!
Running stock fuel injection.
LE spoiler
Tow bar
offset oil cooler in rear for additional capacity and cooling
New pillar at front windshield.
Many new seals and I'm changing out the main and roof seals before selling
Also new front pad
New visors
New correct rain tray
Currently running stainless exhaust, or can change back to ANSA with rear valance - I have Ceracoated this.
New alternator with New wiring harness
New fuel pump
LED headlights
Front sway bar (no rear)
Factory undercoating on main floor pan!
NO RUST- I have taken a few money shots,happy to get more and you can look at it on a rack if you get that serious.
Yes I know this is a big claim, but all those years in the desert have preserved it nicely.........except the paint.
It was repainted in 1983 by Miracle in Reno. It's a good 10ft job. The rear deck lid needs to be reshot as it was touched and it can be seen. I did look at getting it reshot and still may this winter if I don't sell it.
It is also missing the fog lights, I will include a set with new glass at full asking price, may even get to putting these in.
I'll get more shots up as requested, but with my schedule I'm only in 3 days a week in the summer.
Here's what I have so far.
Attached thumbnail(s)
Lots of links -
https://www.dropbox.com/scl/fi/vdz55xjprhtc4yrx8arnk/20230802_144141.jpg?rlkey=h51pb517f3qxv9msiy4pwyjcj&dl=0
https://www.dropbox.com/scl/fi/vw17uqlbisfhszsmuusop/20230802_130205.jpg?rlkey=7j0luxe4x17zi3c1nicpmjp3o&dl=0
https://www.dropbox.com/scl/fi/qr0auz27thtn452x4enbn/20230802_130202.jpg?rlkey=yeztwfg8mwit0t0mr6vyvbo9h&dl=0
https://www.dropbox.com/scl/fi/nblznnl8iy7e6ymfszker/20230802_130200.jpg?rlkey=g2j6k7ueeksxxlzzfpujyh4w4&dl=0
https://www.dropbox.com/scl/fi/z26d1uobpb2cqef259t8j/20230802_130039.jpg?rlkey=axr0m1s1k842929h2eptcgbph&dl=0
https://www.dropbox.com/scl/fi/taca2y9cwuitmhiuzpmxf/20230802_130052.jpg?rlkey=sjjookr3yw747btx2lyya9cxs&dl=0
https://www.dropbox.com/scl/fi/p3ojyt7a6w1lfluw8ht03/20230802_130130.jpg?rlkey=4q95oxq67ou6ju5pywg13is3a&dl=0
https://www.dropbox.com/scl/fi/az8yy29u4k64b6uq6p2e6/20230802_130046.jpg?rlkey=zixji34oyh6rnjg21aooixh5h&dl=0
https://www.dropbox.com/scl/fi/zvb26bealfmyogb5o4yk9/20230802_125631.jpg?rlkey=x5810237eyamw3hfgd3toqad2&dl=0
https://www.dropbox.com/scl/fi/mg4tqu1e7t5rig0suorc2/20230802_125635.jpg?rlkey=uev341tc4gipj8xl8s33quy3a&dl=0
https://www.dropbox.com/scl/fi/l23cbgfulk80vz812wa5e/20230802_125628.jpg?rlkey=ie2gktl3pf368bcwn4osh15vd&dl=0
Hell hole
https://www.dropbox.com/scl/fi/dc9cyp5xbsiwtjtge02ly/20230802_125501.jpg?rlkey=y3vk6mgbb6vw8b7zorskd9osf&dl=0
https://www.dropbox.com/scl/fi/f2eeipbdgg5zu2fn3uiqd/20230802_125213.jpg?rlkey=eahcx99y2mp6106uzuolqyzs7&dl=0
https://www.dropbox.com/scl/fi/sldbvyf7x287e0icvl0yf/20230802_125144.jpg?rlkey=39hu9skyfvw8i8ksnx1rpg0om&dl=0
https://www.dropbox.com/scl/fi/pm1rm6lu1alhpfni2033q/20230802_125009.jpg?rlkey=ozv9o6xsmju9d8nj9525zp3si&dl=0
https://www.dropbox.com/scl/fi/y2nqvw0os67thyhialkf3/20230802_125010.jpg?rlkey=fobg95rxqaw1pfung6bdlfwk0&dl=0
Yes I need to clean it up will do so and post more later
https://www.dropbox.com/scl/fi/4245evs17sn734hvo5rp1/20230802_125024.jpg?rlkey=zvtah6a94ekck9plo9js2sksm&dl=0
https://www.dropbox.com/scl/fi/2h44xs6kpj0xngzn57y4e/20230802_125028.jpg?rlkey=9fwe5rjtxjv1mg0gsdlabscr7&dl=0
https://www.dropbox.com/scl/fi/uhngp8k7170vrxlk3zd63/20230802_124855.jpg?rlkey=e2o73p4mzrreq1rvl0qd3l5yr&dl=0
https://www.dropbox.com/scl/fi/11de73r34ot4qmbiv9q4r/20230802_124852.jpg?rlkey=v30aww7x25yyu0x3olvpw7zix&dl=0
Drivers door latch back
https://www.dropbox.com/scl/fi/dmkjkcyoimcm2xobp6n2d/20230802_124137.jpg?rlkey=rdn6tzrluad8azbyrurkfvu69&dl=0
https://www.dropbox.com/scl/fi/ptewlla1p4wygbz6qx5pu/20230802_124041.jpg?rlkey=59t72bmloldz1oi3q95v3qpit&dl=0
https://www.dropbox.com/scl/fi/enkp9926ibgxass0s1954/20230802_124046.jpg?rlkey=xdbaokns8m23f5eyyn1sj0nju&dl=0
https://www.dropbox.com/scl/fi/akenle2iobexyq59el48c/20230802_123100.jpg?rlkey=ot5zikfs6yuhbee9xdstc9ijz&dl=0
https://www.dropbox.com/scl/fi/cmgp8exs33fntj59utrb3/20230802_123044.jpg?rlkey=ghu4ary2lp8zah9eecwfub6dh&dl=0
https://www.dropbox.com/scl/fi/lod7vsrbasg5aeznm4lee/20230802_123055.jpg?rlkey=qz52uc9qbswelkg82mgebst2c&dl=0
pax door latch mount
https://www.dropbox.com/scl/fi/j1hso4zyjjb2s71ftwaxh/20230802_123042.jpg?rlkey=ct4n2ttegvr1ok7pr18zo10rn&dl=0
https://www.dropbox.com/scl/fi/fyxqv3jsemfld6cbpxzxv/20230802_122711.jpg?rlkey=pkh2hpqubtmcgr9614yjvy920&dl=0
ft pax
https://www.dropbox.com/scl/fi/8gwo9efdeejeqc5p80fkx/20230802_115655.jpg?rlkey=4udse4b4d1vck5spzbk03yg43&dl=0
Drivers front
https://www.dropbox.com/scl/fi/uax2fp4j0x57n092dtjli/20230802_115700.jpg?rlkey=imavrivfmcnocpe8m9zpug3qc&dl=0
https://www.dropbox.com/scl/fi/2i76vne2lbm9je9mnptk2/20230802_115500.jpg?rlkey=2dk952xxakheqd7dk5r1f30cv&dl=0
https://www.dropbox.com/scl/fi/fmt1u3et177gbcv0kqva5/20230802_115648.jpg?rlkey=olbxbulknmg9a5cvy6mwkig9z&dl=0
https://www.dropbox.com/scl/fi/wonxi36l2ky7wf7q3ienw/20230802_115644.jpg?rlkey=7qt15zi4jdo48a8wthcxw70q6&dl=0
https://www.dropbox.com/scl/fi/cdu8w75pqn0nip3yl6ube/20230802_115455.jpg?rlkey=bxgz160sox34xzjrnvlrndv4j&dl=0
https://www.dropbox.com/scl/fi/t0xtg2umevq04va0hkiaa/20230802_115452.jpg?rlkey=tndvkr8lxos9rall1nrd4yjcd&dl=0
https://www.dropbox.com/scl/fi/pzpbu9pihue6tl7tp3jjh/20230802_115443.jpg?rlkey=v1wwdmd8ak91nethxqm72y3uq&dl=0
https://www.dropbox.com/scl/fi/ytnen5gcdze9vyvscjbvo/20230802_115433.jpg?rlkey=mqrmcpke9e4cezkjeulu28vng&dl=0
https://www.dropbox.com/scl/fi/cpn223ft1bfslzw5xxxcs/20230802_115350.jpg?rlkey=uvpmh4oubmg5r5hbgdcxwyq49&dl=0
https://www.dropbox.com/scl/fi/g7ibybn3myd4riyxuilcv/20230802_115336.jpg?rlkey=vwjxnezn7gnm2yxm26nyrnch6&dl=0
https://www.dropbox.com/scl/fi/djo3gm74b4lyijl9v0sln/20230802_115305.jpg?rlkey=5f63mdzsmnevxmqajlveli3hy&dl=0
https://www.dropbox.com/scl/fi/pesn0q3fwu7qvhphfxryw/20230802_115309.jpg?rlkey=9ti0ocy7av57bk37mm2slknmo&dl=0
Bottom of hell hole
https://www.dropbox.com/scl/fi/8g36nc0co05ocme72kvqi/20230802_115313.jpg?rlkey=hly5wbwhkd8ii41owisvwwaoc&dl=0
Documentation
https://www.dropbox.com/scl/fi/6bj6rwjk68vletzs4a86d/20230802_144152.jpg?rlkey=wl9ndt45m69te0gewuxnysnbt&dl=0
https://www.dropbox.com/scl/fi/larhhiqrgtxb9i59f5f9d/20230802_144202.jpg?rlkey=i3cao4p7det0oyn6e91d6fw4o&dl=0
https://www.dropbox.com/scl/fi/8terp2yzvjlvkvyghrkdv/20230802_144453.jpg?rlkey=s83fj8uew01p9p3utog4dh698&dl=0
https://www.dropbox.com/scl/fi/rmnnssut0lxyfhefytua1/20230802_144620.jpg?rlkey=2o0b6iasxd464s0g3eynkuere&dl=0
https://www.dropbox.com/scl/fi/v7oslphkk9cmtnvmxxwk1/20230802_145147.jpg?rlkey=4iskdwykguk3annsd1mang0zn&dl=0
https://www.dropbox.com/scl/fi/1qgpexu9hr8x1i9eizxol/20230802_144651.jpg?rlkey=28vxzvaie31wyvfm0qaiy351n&dl=0
https://www.dropbox.com/scl/fi/7j8tsbwzq4uoc63b99x1p/20230802_144736.jpg?rlkey=aeejteymsmwukfkzq0js2g9qt&dl=0
Some but not all of the documentation that shows progression to the 135K shown now.
Attached thumbnail(s)
The underside is still pretty dirty, so I will be cleaning and posting more pics as I make progress.
Hello Mark....nice car and I am sure it will sell fast. Could you please share some information about the offset oil cooler? I love the idea of more oil capacity and cooler oil......please tell all you can about your set up and how to duplicate it.....thank you very much!!
gg
happy to. The car came with it so I will get some pics and see exactly how it's plumbed, as it works really well. Even climbing the hill up to Lake Tahoe, I was able to be WOT and it really didn't budge much on the temp. I will be replicating this in my next engine build.
Here's what I did today'
The black that looks like paint is actually a tar like material that will steam off.
Attached thumbnail(s)
Found what looks like some surface rust in the cleaning process.
Debating on how far I want to go, but I will more than likely blast this area, evaluate and repair if necessary. Going to clean the other side 1st, as I suspect it is very similar.
Attached image(s)
The before cleaning
Attached image(s)
Curiosity finally got the best of me so I decided to examine a little further. My thought process is that....... If I'm selling a car that is as rust free as it can be, I can't leave a big question-mark here.
That and the rest of the car is so clean that I couldn't imagine there was anything more than surface rust.
Turns out the undercoating is very thick. When I 1st started cleaning I tried a little acetone. I'm pretty sure the "brown" coloration that looked like it could be rust was where I took some of the tar material into the undercoating with the acetone.
Attached thumbnail(s)
Drivers side-
Cleaned up and shot some acid etch primer to protect it as I continue to clean.
My plan is to re-undercoat with the I have (NOS unavailable like most really good chemicals ). and feather it in My goal is preservation and making sure there is no rust.
Attached thumbnail(s)
Front drivers side corner is in good shape
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)