Looking to sell or trade for a 911 or 912. Something with a back seat & already on the road. A driving project is OK.
- 73 body, 83SC 911 front suspension,
--5-bolt Fuchs, Konis front & back, 180lb springs in back.
-Trailing arms and rear pan reinforced for the conversion.
-Welded bulkhead engine mount.
- Peterson front mounted oil tank w/Setrab front mounted oil cooler
- Jwest shifter
- Welded Tangerine racing roll cage
- Battery moved to front
- 2.7 rebuilt engine, break-in time only. New clutch & resurfaced flywheel
- Weber carbs, PMO watershields & linkage
- 901 tranny
- Bursch headers, p-shooter exhaust
- New body/door seals not installed
- All parts to complete are with the car (top, rocker covers, engine lid, etc)
NEEDS:
- Paint job, surface rust on some body panels
- Interior needs to be cleaned up
- Roll bar not painted
- Shift rod installed
- Rear brake lines
- I'm sure there are a few other items that I'm forgetting, but it is close to being on the road.
Looking for $10K or 5K as a roller (tranny, exhaust & oil system will stay with the car).
email: jvirnoche AT hotmail.com
Couldn't upload pictures. PM or email me & I will send them.
Please provide some photographs of the vehicle to have a look at.
many thnaks
Looks like the files are too big to upload. See the pictures posted on 914Club or I can email them to you directly.
http://www.914club.com/bbs2/index.php?showtopic=134143
Found a 911 that I can get locally but this needs to go first. $9,000 or will sell as a roller for $4,000. I do not want to sell just the engine.
Yes, this was Jake Raby's test mule.
Here is a freeware picture resizer. Easy to install and use... Enjoy
http://bluefive.pair.com/pixresizer.htm
Pictures:
Attached image(s)
More pics. There are a few small rust holes in the passenger side pan & one the drivers side. I taped a dime next to the hole, hopefully it shows in the picture.
Let me know if anyone want more pics.
Attached image(s)
Oh, thanks for the picture re-sizer.
bump
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)