Printable Version of Topic

Click here to view this topic in its original format

914World.com _ Ads: All Other Non-914 Stuff _ Steel framed gantry engine lift or ?

Posted by: Mueller Jan 31 2015, 05:24 PM

88" from ground to bottom of channel

105" inside dimension

top rail made from double unistrut

Located in Antioch , Ca

Can be taken apart i

Attached Image

Posted by: malcolm2 Jan 31 2015, 05:33 PM

I call that stuff, "grown man erector set" the strut nuts fit in the strut, might have springs on them to hold the nut close to the mouth of the strut. 9/16" wrench will loosen the bolt and you can remove the brackets.

Lay it down first, so it does not fall on you.

Posted by: Mueller Jan 31 2015, 05:40 PM

QUOTE(malcolm2 @ Jan 31 2015, 03:33 PM)

I call that stuff, "grown man erector set" the strut nuts fit in the strut, might have springs on them to hold the nut close to the mouth of the strut. 9/16" wrench will loosen the bolt and you can remove the brackets.

Lay it down first, so it does not fall on you.

Nope... no girly man 9/16" wrench.... 3/4" manly sized wrench needed!