Printable Version of Topic
914World.com _ Member Vendors _ FS - SS fuel lines, engine compartment lines,, all 4
Posted by: Rotary'14 Aug 15 2010, 11:49 PM
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
Engine Compartment $25 each + $15 shipping
Engine Compartment set (2 lines) $45 + $15 shipping
Tunnel fuel line each $40 + $25 shipping
Tunnel fuel line (set of 2)$75 + $35 shipping
If ordering a complete set shipping will be $40 in continental US.
complete your installation with the following,,,
Fuel tank fuel sock $10
Fuel tank sealing ring NLA for now
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $2.00 each or $1.75 each(if you order more than 10)
Shipping included if you buy a set of lines.
Thanks for looking!
Attached thumbnail(s)
Posted by: Rotary'14 Aug 18 2010, 09:00 AM
Here are a couple of pics of how the lines look once installed.
Attached thumbnail(s)
Posted by: Rotary'14 Aug 18 2010, 11:24 PM
I put together an install video,,,
http://www.youtube.com/watch?v=hxFRQTWLetw
There is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.
Posted by: Rotary'14 Aug 31 2010, 06:58 PM
I can also supply lines in 8mm now too! Now I can say my set is a direct replacement for the stock sizes.
Same great price.
-Robert
Posted by: Kalva Sep 3 2010, 12:39 PM
Recieved my set they look great!!!
Thanks
Posted by: VOX Sep 3 2010, 04:48 PM
let me know when you'll be in my area. rosemead.
Posted by: Rotary'14 Sep 3 2010, 07:49 PM
QUOTE(VOX @ Sep 3 2010, 03:48 PM)
let me know when you'll be in my area. rosemead.
I can deliver to people local to Los Angeles. Hell I can deliver to peeps on my way home from work,,, that includes, Camarillo, Simi Valley, Northridge, SF valley, Burbank, Glendale,,,, you get the idea. Drop me a PM and we can set something up.
-Robert
Posted by: Rotary'14 Sep 3 2010, 07:58 PM
QUOTE(Kalva @ Sep 3 2010, 11:39 AM)
Recieved my set they look great!!!
Thanks
I am glad you like them.
-Robert
Posted by: 396 Sep 3 2010, 10:57 PM
looks like real clean work.. will keep you in mind if I need a set.
Posted by: Britain Smith Sep 3 2010, 11:17 PM
Any chance you can make a set with AN fittings welded on the ends? I will need a set of AN-8 supply and AN-6 return.
-Britain
Posted by: jjbunn Sep 4 2010, 10:19 AM
Does the engine need to be out to fit these?
Posted by: Rotary'14 Sep 4 2010, 01:13 PM
QUOTE(jjbunn @ Sep 4 2010, 09:19 AM)
Does the engine need to be out to fit these?
The engine can be in the car to install these. The most you might have to do is support the engine with a jack, and pull the engine mount back a little on the right side for some clearance.
I will work on an install video with the engine in the car next time.
-Robert
Posted by: Rotary'14 Sep 11 2010, 09:05 AM
RRC weekend bump! Wish I was there,,,,,
Posted by: c12croft Sep 11 2010, 05:09 PM
Robert,
"I will work on an install video with the engine in the car next time".
This would be well received.
How about you maybe stop by NY on your way home one night?
Posted by: Rotary'14 Sep 11 2010, 06:09 PM
QUOTE(c12croft @ Sep 11 2010, 04:09 PM)
Robert,
"I will work on an install video with the engine in the car next time".
This would be well received.
How about you maybe stop by NY on your way home one night?
No problem,,, next time I decide to take the long way home.
-Robert
Posted by: Britain Smith Sep 11 2010, 09:21 PM
QUOTE(Britain Smith @ Sep 3 2010, 10:17 PM)
Any chance you can make a set with AN fittings welded on the ends? I will need a set of AN-8 supply and AN-6 return.
-Britain
Never heard back from you regarding this...can you do it?
-Britain
Posted by: Rotary'14 Sep 12 2010, 03:01 PM
QUOTE(Britain Smith @ Sep 11 2010, 08:21 PM)
QUOTE(Britain Smith @ Sep 3 2010, 10:17 PM)
Any chance you can make a set with AN fittings welded on the ends? I will need a set of AN-8 supply and AN-6 return.
-Britain
Never heard back from you regarding this...can you do it?
-Britain
Hey Britain,, Sorry, I cannot do this mod at this time. Point me in the direction of some economical SS AN fittings, and maybe I can make you a one off set. I do have access to some really nice welders at work.
-Robert
Posted by: bandjoey Sep 17 2010, 09:45 PM
Do you have a way to ship these? Thanks Bill
Posted by: Rotary'14 Sep 17 2010, 11:59 PM
QUOTE(bandjoey @ Sep 17 2010, 08:45 PM)
Do you have a way to ship these? Thanks Bill
Yes I can ship these in a large flat 60"x20" cardboard package that ships USPS priority mail. Should arrive 3 days after shipping.
$35 each + $14 shipping
$60 set of 2 + $16 shipping
-Robert
Posted by: sixnotfour Sep 18 2010, 08:53 AM
QUOTE(Britain Smith @ Sep 11 2010, 08:21 PM)
QUOTE(Britain Smith @ Sep 3 2010, 10:17 PM)
Any chance you can make a set with AN fittings welded on the ends? I will need a set of AN-8 supply and AN-6 return.
-Britain
Never heard back from you regarding this...can you do it?
-Britain
Racer Chris sells a subi conversion set
Posted by: aircooledtechguy Sep 23 2010, 06:21 PM
Just wanted to thank you for the great product and your honesty on the shipping by refunding me the extra. If I need more lines, I'll hit you up for sure. Thanks again!!
BTW, I used my 914 to go to the post office to pick-up the package not thinking. . . It *JUST* fit!!
Posted by: two-strokejohn Oct 3 2010, 06:38 PM
I'd like to get a set of these fuel lines shipped to Ohio. I've tried to email you without success. can you contact me or give me contact info please
thanks, John
Posted by: Rotary'14 Oct 3 2010, 07:31 PM
QUOTE(two-strokejohn @ Oct 3 2010, 05:38 PM)
I'd like to get a set of these fuel lines shipped to Ohio. I've tried to email you without success. can you contact me or give me contact info please
thanks, John
Doh! I should check that email more. You can get a much faster response from me thru PM.
-Robert
Posted by: Montreal914 Oct 3 2010, 11:59 PM
Hi Robert,
Do you make the two short lines in the engine compartment?
Thanks,
Eric
Posted by: Rotary'14 Oct 4 2010, 01:31 PM
QUOTE(Montreal914 @ Oct 3 2010, 10:59 PM)
Hi Robert,
Do you make the two short lines in the engine compartment?
Thanks,
Eric
Funny you should ask,, they are in the works and should be available soon.
-Robert
Posted by: Strudelwagon Oct 4 2010, 02:04 PM
QUOTE(Rotary'14 @ Aug 15 2010, 10:49 PM)
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
$35 each + $14 shipping
$60 set of 2 + $16 shipping
Thanks for looking!
Any idea what shipping would be for the set of 2 to Penticton ,BC,Canada V2A 3K3?
Thanks
Posted by: PanelBilly Oct 5 2010, 01:17 PM
I'm waiting for the short one and then I'll order all four at the same time. Send me a PM when they're done.
Posted by: Rotary'14 Oct 5 2010, 06:53 PM
QUOTE(Strudelwagon @ Oct 4 2010, 01:04 PM)
QUOTE(Rotary'14 @ Aug 15 2010, 10:49 PM)
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
$35 each + $14 shipping
$60 set of 2 + $16 shipping
Thanks for looking!
Any idea what shipping would be for the set of 2 to Penticton ,BC,Canada V2A 3K3?
Thanks
Shipping for a set of lines up to Canada runs $26 via USPS priority mail. I'll be checking UPS, but I hear they are more.
-Robert
Posted by: Montreal914 Oct 5 2010, 10:39 PM
QUOTE(Rotary'14 @ Oct 4 2010, 12:31 PM)
QUOTE(Montreal914 @ Oct 3 2010, 10:59 PM)
Hi Robert,
Do you make the two short lines in the engine compartment?
Thanks,
Eric
Funny you should ask,, they are in the works and should be available soon.
-Robert
Please PM me when you have them, thanks.
Posted by: Al Meredith Oct 6 2010, 07:03 PM
Mine came today , even though the box said all over it "do not bend and fragile, the box was bent . I'm taking it to the post office tomorrow and let them open it. I'll advise. AL
Posted by: wreglesworth Oct 22 2010, 12:57 AM
QUOTE(Rotary'14 @ Oct 13 2010, 08:35 PM)
I am happy to report that Al Meridith got it worked out with the USPS.
In other news look what I figured out how to make!
Engine compartment fuel lines will cost $35 for a set of 2. I am pretty sure I can ship these for about $10 in the USA.
-Robert
I would like a full set please (2 long 2 short)
What would it be to ship them to me in Vancouver Canada
(cheapest possible no rush)
Post code V0N 2E0
THanks!
Jonathan
Posted by: Rotary'14 Oct 22 2010, 03:16 PM
QUOTE(wreglesworth @ Oct 21 2010, 11:57 PM)
QUOTE(Rotary'14 @ Oct 13 2010, 08:35 PM)
I am happy to report that Al Meridith got it worked out with the USPS.
In other news look what I figured out how to make!
Engine compartment fuel lines will cost $35 for a set of 2. I am pretty sure I can ship these for about $10 in the USA.
-Robert
I would like a full set please (2 long 2 short)
What would it be to ship them to me in Vancouver Canada
(cheapest possible no rush)
Post code V0N 2E0
THanks!
Jonathan
Working on this,, will post details next week.
-Robert
Posted by: Rotary'14 Nov 2 2010, 01:36 PM
QUOTE(wreglesworth @ Oct 21 2010, 11:57 PM)
QUOTE(Rotary'14 @ Oct 13 2010, 08:35 PM)
I am happy to report that Al Meridith got it worked out with the USPS.
In other news look what I figured out how to make!
Engine compartment fuel lines will cost $35 for a set of 2. I am pretty sure I can ship these for about $10 in the USA.
-Robert
I would like a full set please (2 long 2 short)
What would it be to ship them to me in Vancouver Canada
(cheapest possible no rush)
Post code V0N 2E0
THanks!
Jonathan
Bad news for my potential Canadian customers,, Fed Ex/DHL wants $75 (ouch!) and UPS ground is $50. USPS keeps quoting me different prices, or will not do it.
Big Sorry for Canadians. BTW it's a 58"x14"x1.5" package.
Now for some good news, things I offer fuel related. I am happy to report I offer the following;
Fuel tank fuel sock $10
Fuel tank sealing ring $.50 each
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $1.75 each or $1.50 each(if you order more than 10)
Shipping included if you buy a set of lines!
-Robert
Posted by: dwillouby Nov 4 2010, 06:26 AM
Can you do the tunnel lines in 3/8 inch?
I have a V8 conversion with fuel injection
Thanks
David
Posted by: Rotary'14 Nov 4 2010, 06:37 AM
QUOTE(dwillouby @ Nov 4 2010, 05:26 AM)
Can you do the tunnel lines in 3/8 inch?
I have a V8 conversion with fuel injection
Thanks
David
I can do the whole set, tunnel and engine compartment lines, in 3/8. Custom requests are welcome.
-Robert
Posted by: Rotary'14 Mar 4 2011, 09:21 AM
new month bump
Posted by: 76-914 Mar 21 2011, 03:06 PM
I wanted to give Robert a bump for us west coasters. I just installed his set last week. Very quick and easy install. Took 20 min's. I already had the engine and gas tank removed. Good quality and quick shipping.
Posted by: Series9 Apr 14 2011, 02:45 PM
I would like to buy a set for the tunnel. I sent an email, but no reply.
Posted by: Rotary'14 Apr 14 2011, 05:57 PM
QUOTE(Series9 @ Apr 14 2011, 01:45 PM)
I would like to buy a set for the tunnel. I sent an email, but no reply.
Hi Joe,,
Sorry for not checking my E-mail,, the easiest way to get a hold of me is to drop me a PM via the world site. I have tunnel lines in stock and ready to go,, what size do you need? 70~74 9.5mm and 8mm or 75~76 two 8mm lines.
-Robert
Posted by: DB914 Jul 2 2011, 07:22 AM
Hi Robert,
I would like a complete set of ss fuel lines for my 73 2.0
Dave
Posted by: turnaround89 Sep 1 2011, 02:33 PM
Just wanted to say thanks for such a great product. The fuel lines took less than an hour to install and the fuel lines were immaculate. If i ever build another 914, i will buy another set from you. Thanks so much!!!!
Posted by: Rotary'14 Apr 20 2012, 02:42 PM
I haven't bumped this in a long time bump,,,,,,
Posted by: earthcloud May 24 2012, 01:13 AM
QUOTE(Rotary'14 @ Apr 20 2012, 01:42 PM)
I haven't bumped this in a long time bump,,,,,,
Timely bump. I have a 75 and planing to rid the plastic lines...what do you have? $? Thanks Charles
Posted by: 914six Jul 21 2012, 11:49 AM
hey .. got some SS fuel lines thru the tunnel from Robert..
great guy and products.
Posted by: mittelmotor Jul 30 2012, 09:38 PM
Hi Robert,
Got the lines and they look great! Over the long, straight sections of the line, they're bent slightly. Is this intentional for an easy install, or did it just happen in shipping? No big deal to bend them back, but I thought I'd check.
Thanks!
--Doug
Attached image(s)
Posted by: Jesco Reient Aug 1 2012, 12:25 PM
Are these still available?
Posted by: Rotary'14 Aug 3 2012, 09:34 PM
QUOTE(mittelmotor @ Jul 30 2012, 08:38 PM)
Hi Robert,
Got the lines and they look great! Over the long, straight sections of the line, they're bent slightly. Is this intentional for an easy install, or did it just happen in shipping? No big deal to bend them back, but I thought I'd check.
Thanks!
--Doug
Hi Doug, the slight bend is intentional,, that's why the box is not flat.
yes these lines are still available,, check first post for pricing.
-Robert
Posted by: mittelmotor Aug 6 2012, 02:29 PM
QUOTE(Rotary'14 @ Aug 3 2012, 08:34 PM)
QUOTE(mittelmotor @ Jul 30 2012, 08:38 PM)
Hi Robert,
Got the lines and they look great! Over the long, straight sections of the line, they're bent slightly. Is this intentional for an easy install, or did it just happen in shipping? No big deal to bend them back, but I thought I'd check.
Thanks!
--Doug
Hi Doug, the slight bend is intentional,, that's why the box is not flat.
yes these lines are still available,, check first post for pricing.
-Robert
Thanks! I appreciate the reply.
Posted by: gothspeed Sep 25 2012, 02:14 PM
Wow, I wish I knew about this deal before I bought some bulk rolls of SS fuel line ........... but I may just get some anyway ........ are these still available?
Posted by: Rotary'14 Sep 25 2012, 02:30 PM
QUOTE(gothspeed @ Sep 25 2012, 01:14 PM)
Wow, I wish I knew about this deal before I bought some bulk rolls of SS fuel line ........... but I may just get some anyway ........ are these still available?
Hi,,, yes I have these lines still in stock,, I am always making more,, and can even make some in seamless stainless steel for people who want to "swage" fittings on to them. PM me for details,,,
-Robert
Posted by: porbmw Oct 26 2012, 06:33 AM
Just got my set for a 6.
Haven't installed yet, but they look great.
Thanks, Robert
Posted by: podiummotorsports Jan 7 2013, 04:40 PM
I would like to purchase a set. I PM you. Let me know what to do next.
Posted by: tool14 Jan 27 2013, 11:54 AM
Hi i sent you a PM i would like to buy some lines.
Thanks.
Posted by: 914socal Feb 3 2013, 02:14 AM
Hello,
I'm being told I need this product for my car before I have a big problem. I am in Burbank, Ca. Let me know what I need for my 73 2.0L. Dumb question but can this be done with the engine in car? Thanks
Posted by: 914socal Mar 3 2013, 08:13 PM
QUOTE(914socal @ Feb 3 2013, 12:14 AM)
Hello,
I'm being told I need this product for my car before I have a big problem. I am in Burbank, Ca. Let me know what I need for my 73 2.0L. Dumb question but can this be done with the engine in car? Thanks
Hey Robert,
Thanks for such a good product! Got the new lines installed this weekend and was as smooth as possible!! Thanks again.
Posted by: Pat Garvey Mar 18 2013, 06:37 PM
Still have any socks?
Pat
Posted by: Rotary'14 Mar 23 2013, 08:07 PM
Why yes I just restocked and am full of socks,,,, I guestimate shipping for a small box containing the sock would be about $5 in the USA,, $2 for a padded envelope your choice your risk. Sealing rings are $1 for both.
-Robert
Posted by: ndfrigi Apr 15 2013, 04:39 PM
Hi Sir Robert,
PM sent for fuel lines
God Bless!
Posted by: ndfrigi Apr 24 2013, 03:30 PM
QUOTE(ndfrigi @ Apr 15 2013, 03:39 PM)
Hi Sir Robert,
PM sent for fuel lines
God Bless!
Hi Robert,
Thank you so much for a quick shipment of my SS fuel lines. Got them today from USPS.
Eventhough it was not yet installed I'm sure this is a perfect item. Looks really beautiful and very nice workmanship.
Thanks again and God Bless!
Posted by: Mr. Olympic Blue 2 You May 8 2013, 05:33 PM
Robert-Just wanted to let you know our group buy arrived safe and sound. The workmanship, packaging, etc exceeded our expectations.
Thanks for answering our questions in a quick manner as well. You have been awesome to deal with.
Thanks again,
Andrew
Posted by: Axel May 20 2013, 09:39 PM
Any update on an install video with the engine still in place?
Thanks.
Posted by: Rotary'14 May 21 2013, 12:55 PM
QUOTE(Axel @ May 20 2013, 08:39 PM)
Any update on an install video with the engine still in place?
Thanks.
I've had numerous customers install with the engine in. Since I don't have a T4 installed in my car,, a video made of my car just doesn't look right.
-Robert
Posted by: dkos Jun 2 2013, 05:20 PM
I've PM'd you a few times and haven't gotten a response. Are you still selling?
Posted by: dale73914 Jun 11 2013, 09:19 PM
Hi,
Reading through the post it looks like you had issues at one stage shipping to Canada. I'm in Melbourne, Australia !!
Given i keep seeing photos of burnt cars cropping up, I would like a full set of everything .
Any chance on a price for this shipped, or is it not doable ??
Cheers
Dale
Posted by: Rotary'14 Jan 27 2014, 04:52 PM
Bump for a new year,,,,,,
Posted by: sean_v8_914 Mar 18 2014, 04:26 PM
i need it all. pm sent
Posted by: RenoRoger Jul 13 2014, 01:13 AM
QUOTE(Rotary'14 @ Jan 27 2014, 03:52 PM)
Bump for a new year,,,,,,
Are you still making fuel lines? I have a '73 2.0 and would like to replace the original plastic lines. I also need at least the grommets for the fuel line holes leading into the engine compartment. If I move the fuel pump to the front under the tank, should I use a 9.5 mm line for delivery or 8 mm for both delivery and return?
Please advise current pricing and shipping charges to 89503.
RenoRoger
Posted by: seans9146 Aug 5 2014, 10:00 PM
Hi,
Are you still selling the SS fuel lines? Need set for 914/6. Cost? Shipping to Zip Woodland, CA 95695?
Thank you,
Sean
Posted by: Rotary'14 Sep 10 2014, 01:50 PM
Still in business bump,,
PM me and I will PM you back.
Posted by: seans9146 Sep 22 2014, 07:59 PM
QUOTE(Rotary'14 @ Sep 10 2014, 12:50 PM)
Still in business bump,,
PM me and I will PM you back.
Hi Robert,
The workmanship of the 8mm SS fuel lines for the engine compartment and tunnel is incredible. As you can tell, I'm very pleased with the lines and accessories! Thank you.
Sean
Posted by: 02loftsmoor May 16 2015, 08:36 PM
QUOTE(Rotary'14 @ Aug 16 2010, 12:49 AM)
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
Engine Compartment $22 each + $10 shipping
Engine Compartment set (2 lines) $40 + $10 shipping
Tunnel fuel line each $38 + $14 shipping
Tunnel fuel line (set of 2)$70 + $16 shipping
complete your installation with the following,,,
Fuel tank fuel sock $10
Fuel tank sealing ring $.50 each
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $2.00 each or $1.75 each(if you order more than 10)
Shipping included if you buy a set of lines.
Thanks for looking!
are you still making fuel lines, need the one tunnel line, fire wall grommets, engine shelf grommets, fuel tank sealing ring. going with Carbs.. Wes
Posted by: cantley914 Jul 1 2015, 09:04 AM
Hi,
I would need a complete set too.
Was wondering if there is anyone in northern NY (close to the border) that would agree I have the set shipped to their place, as shipping to Canada is not possible. Once received, I would go and pick it up at their home.
PM me for arrangements,
Steph
Posted by: Rotary'14 Aug 7 2015, 12:09 PM
All PMs responded to. I am still alive and products are available.
Bump!
Posted by: AndyB Aug 19 2015, 11:29 AM
QUOTE(cantley914 @ Jul 1 2015, 11:04 AM)
Hi,
I would need a complete set too.
Was wondering if there is anyone in northern NY (close to the border) that would agree I have the set shipped to their place, as shipping to Canada is not possible. Once received, I would go and pick it up at their home.
PM me for arrangements,
Steph
Just saw this steph. Send me a pm
Posted by: arvcube Aug 26 2015, 11:16 PM
Sent pm
Posted by: cantley914 Oct 18 2015, 08:41 PM
QUOTE(cantley914 @ Jul 1 2015, 07:04 AM)
Hi,
I would need a complete set too.
Was wondering if there is anyone in northern NY (close to the border) that would agree I have the set shipped to their place, as shipping to Canada is not possible. Once received, I would go and pick it up at their home.
PM me for arrangements,
Steph
Item picked up & installed. Thanks so much Andy, They are a perfect fit. Item arrived at destination intact, excellent packaging. Again thanks and yes guys, they are easy to install and fit A1.
Steph in cold Canada
Posted by: rhodyguy Nov 14 2015, 10:53 AM
Just curious. What is the problem on shipping them to the great white north?
Posted by: Amphicar770 Jan 29 2016, 09:53 PM
Have you thought about offerin stainless, pre-bent brake lines. Many of the originals are NLA and no one seems to offer a pre-formed kit.
Sure, you can buy straight tubes and bend your own. But for those of us who are 3-D deficient, they always come out looking bad.
Posted by: mepstein Jan 31 2016, 07:44 PM
QUOTE(Amphicar770 @ Jan 29 2016, 10:53 PM)
Have you thought about offerin stainless, pre-bent brake lines. Many of the originals are NLA and no one seems to offer a pre-formed kit.
Sure, you can buy straight tubes and bend your own. But for those of us who are 3-D deficient, they always come out looking bad.
Pmbperformance makes them
Posted by: Rotary'14 Feb 5 2016, 12:21 PM
PMB makes them and offers it at a reasonable price.
Posted by: malcolm2 May 10 2016, 04:45 PM
QUOTE(Rotary'14 @ Aug 19 2010, 12:24 AM)
I put together an install video,,,
http://www.youtube.com/watch?v=hxFRQTWLetw
There is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.
what happened to your video?
Posted by: Rotary'14 May 17 2016, 04:05 PM
QUOTE(malcolm2 @ May 10 2016, 03:45 PM)
QUOTE(Rotary'14 @ Aug 19 2010, 12:24 AM)
I put together an install video,,,
http://www.youtube.com/watch?v=hxFRQTWLetw
There is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.
what happened to your video?
I contacted youtube and as of today 5/17/2016 the video seems to work,,, with sound too!
Posted by: ndfrigi May 17 2016, 04:19 PM
QUOTE(Rotary'14 @ May 17 2016, 03:05 PM)
QUOTE(malcolm2 @ May 10 2016, 03:45 PM)
QUOTE(Rotary'14 @ Aug 19 2010, 12:24 AM)
I put together an install video,,,
http://www.youtube.com/watch?v=hxFRQTWLetw
There is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.
what happened to your video?
I contacted youtube and as of today 5/17/2016 the video seems to work,,, with sound too!
Hi Robert, you tube video still not working.
Posted by: Rotary'14 May 24 2016, 04:12 PM
QUOTE(ndfrigi @ May 17 2016, 03:19 PM)
QUOTE(Rotary'14 @ May 17 2016, 03:05 PM)
QUOTE(malcolm2 @ May 10 2016, 03:45 PM)
QUOTE(Rotary'14 @ Aug 19 2010, 12:24 AM)
I put together an install video,,,
http://www.youtube.com/watch?v=hxFRQTWLetw
There is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.
what happened to your video?
I contacted youtube and as of today 5/17/2016 the video seems to work,,, with sound too!
Hi Robert, you tube video still not working.
Thanks Noel,,,,
OK,,, I am sure the video works now,,,, cool music is gone and slow soothing music is now in it's place. At least the video is watch-able again.
Posted by: rhodyguy May 25 2016, 01:36 PM
Worked for me.
Posted by: Mueller Jun 1 2016, 10:53 AM
Video works....now reply to my PM so I can send you some money for parts!
Posted by: Mueller Jun 25 2016, 11:15 AM
Got the parts, they look great and packaged perfectly.
thanks
Posted by: Papermaker Jul 23 2016, 05:29 AM
Hi Rotary '14--
PM sent.
--Papermaker
Posted by: Optimusglen Jul 23 2016, 10:41 AM
I'm interesred in a single fuel line for the tunnel. Running carbs and no return line.
Posted by: jacquot Jul 27 2016, 03:08 PM
Hi Robert,
Finally got around to replacing my cracked original fuel lines and
installing the new fuel lines I bought from you, as I now
have the engine and fuel tank out of the car.
Perfect fit, grommets and lines went in very easily, less than 10 min,
with no muss, no fuss.
Thanks again, Jacquot
Posted by: Rotary'14 Jul 28 2016, 03:05 PM
QUOTE(jacquot @ Jul 27 2016, 02:08 PM)
Hi Robert,
Finally got around to replacing my cracked original fuel lines and
installing the new fuel lines I bought from you, as I now
have the engine and fuel tank out of the car.
Perfect fit, grommets and lines went in very easily, less than 10 min,
with no muss, no fuss.
Thanks again, Jacquot
I am glad to hear that you found it so easy!
Posted by: mmascari Aug 21 2016, 05:14 PM
Bump on great product. Easy install and look great!
Posted by: jet1 Aug 25 2016, 05:39 PM
The lines arrived today and look very nice. I can't wait to get them installed. Thanks for the great communication and fast shipping.
Keith
Posted by: fullerton914 Oct 23 2016, 08:03 PM
Robert:
I spoke with you today at Bruce's swap met. I bought a set of your ss fuel line about a year ago - still have not installed yet. I am ready now . the video is helpful
I want to purchase your rubber firewall grommets. Please provide instructions at your convenience so I can complete the transaction
Thanks
Steve
Posted by: Rotary'14 Oct 25 2016, 10:20 AM
QUOTE(fullerton914 @ Oct 23 2016, 07:03 PM)
Robert:
I spoke with you today at Bruce's swap met. I bought a set of your ss fuel line about a year ago - still have not installed yet. I am ready now . the video is helpful
I want to purchase your rubber firewall grommets. Please provide instructions at your convenience so I can complete the transaction
Thanks
Steve
Hey Steve,,, I sent you a PM and an email.
Posted by: morsmanlaw Dec 26 2016, 10:18 PM
PM sent.
Posted by: peetgee Dec 27 2016, 02:07 PM
Pm sent
Posted by: Wayne Feb 7 2017, 09:46 AM
PM sent
Posted by: aggiezig Feb 7 2017, 11:52 PM
PM Sent.
Posted by: sawdust Feb 15 2017, 07:42 PM
QUOTE(Rotary'14 @ Aug 15 2010, 11:49 PM)
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
Engine Compartment $22 each + $10 shipping
Engine Compartment set (2 lines) $40 + $10 shipping
Tunnel fuel line each $38 + $14 shipping
Tunnel fuel line (set of 2)$70 + $16 shipping
complete your installation with the following,,,
Fuel tank fuel sock $10
Fuel tank sealing ring $.50 each
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $2.00 each or $1.75 each(if you order more than 10)
Shipping included if you buy a set of lines.
Can these be installed with the engine in?
Thanks for looking!
Posted by: Rotary'14 Mar 1 2017, 05:15 PM
QUOTE(sawdust @ Feb 15 2017, 05:42 PM)
QUOTE(Rotary'14 @ Aug 15 2010, 11:49 PM)
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
Engine Compartment $22 each + $10 shipping
Engine Compartment set (2 lines) $40 + $10 shipping
Tunnel fuel line each $38 + $14 shipping
Tunnel fuel line (set of 2)$70 + $16 shipping
complete your installation with the following,,,
Fuel tank fuel sock $10
Fuel tank sealing ring $.50 each
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $2.00 each or $1.75 each(if you order more than 10)
Shipping included if you buy a set of lines.
Can these be installed with the engine in?
Thanks for looking!
Yes the tunnel lines can be installed with the engine in. The higher up you get the car,, the easier it will be. And you really should remove the fuel tank to make the job easier.
-Robert
Posted by: arvcube Apr 5 2017, 08:21 PM
Just installed my set. Easy install. Jacked up the rear on stands, didn't have to remove anything. Fished it through. The ends snapped right into the existing clips. Thanks for a great product Robert!
Posted by: emmy914 Apr 22 2017, 10:42 AM
QUOTE(Rotary'14 @ Aug 16 2010, 01:49 AM)
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
I am in need of replacing the fuel lines from the tank back to the motor and engine compartment lines- all.
Also, all of the lines on the fuel injection system. I have no idea of the total number of clamps need. I would want a few extra. Do you sell the injection line as well ???
1975 2.0. The long term project is to up hp by a modification of 2.0 or swap for more cylinders - V8. If that is a larger size line I am going to do that now.
I want everything to do it right....Fuel tank fuel sock, Fuel tank sealing ring,
Firewall grommets - how many 2 ???
Engine shelf grommets - how many ???
I can be reached at 419 276 2299.
Thank you and God Bless
Jim
Engine Compartment $22 each + $10 shipping
Engine Compartment set (2 lines) $40 + $10 shipping
Tunnel fuel line each $38 + $14 shipping
Tunnel fuel line (set of 2)$70 + $16 shipping
complete your installation with the following,,,
Fuel tank fuel sock $10
Fuel tank sealing ring $.50 each
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $2.00 each or $1.75 each(if you order more than 10)
Shipping included if you buy a set of lines.
Thanks for looking!
Posted by: seanpaulmc Apr 23 2017, 06:42 PM
PM sent
Posted by: sholman5 Apr 30 2017, 05:15 PM
QUOTE(seanpaulmc @ Apr 23 2017, 08:42 PM)
PM sent
PM sent
Posted by: sholman5 May 13 2017, 06:07 AM
Received mine yesterday. Great workmanship. Install was a breeze. Engine was out. Took me about 20 min to install including removal of old lines. If you don't have these lines and have the ability to replace them. DO IT.
Posted by: Wyvern Dec 16 2017, 05:43 PM
PM sent to OP.
Are you still putting the kit together ?
Posted by: slyder Jan 11 2018, 07:48 PM
PM sent
Posted by: Rotary'14 Jun 26 2018, 03:57 PM
Even though I am not actively posting,, I am still making these and responding to PMs.
Friendly bump.
Posted by: VintageExcellence Aug 21 2018, 02:07 PM
Robert, sent you a message, need a pair of lines
Posted by: rhodyguy Aug 21 2018, 03:22 PM
His email feature is active in his profile.
Posted by: mb911 Jan 2 2019, 02:38 PM
Pm'd a while ago. No response? Not sure if this service is still offered?
Posted by: JmuRiz Jan 3 2019, 01:22 PM
Yes it is, I got a set a couple weeks ago.
Maybe a full inbox?
Give him another try and he should respond.
Posted by: rallysport70 Feb 9 2019, 04:36 PM
PM sent
Posted by: flmont Jun 15 2019, 03:20 PM
Do you make custom lines,I would like the ends bent in different directions..?? Thanks frank
Posted by: ndfrigi Jul 9 2019, 05:47 PM
QUOTE(Rotary'14 @ Jul 9 2019, 04:39 PM)
Bump to let everybody know I'm still around.......
PMs work much better than email for me because I lost access to my old email account.
and not sure how to change it,,,,,
Robert,
to change email settings:
Go to Control Panel then
Go to Option then select Change Email.
Anyway, I will be ordering tunnel fuel lines soon again.
Posted by: chipndayle Jul 12 2019, 02:17 PM
QUOTE(Rotary'14 @ Jul 9 2019, 07:39 PM)
Bump to let everybody know I'm still around.......
PMs work much better than email for me because I lost access to my old email account.
and not sure how to change it,,,,,
Hi Robert -- I want to buy a set of the SS lines. I sent you both an email and a PM, but have not heard anything.
If someone else knows Robert and could call or contact him, I'd appreciate it.
All the Best, Chip
Posted by: 914werke Nov 8 2021, 08:46 AM
I also recently reached out to Robert, similar result anyone local to him know of his status?
Posted by: 76-914 Nov 8 2021, 09:17 AM
Don't forget that Chris Foley at Tangerine racing sells those lines also.
Posted by: rhodyguy Nov 8 2021, 11:08 AM
Are guys using the email or pm options to contact Robert?
Posted by: mepstein Nov 8 2021, 11:34 AM
QUOTE(76-914 @ Nov 8 2021, 10:17 AM)
Don't forget that Chris Foley at Tangerine racing sells those lines also.
Yes. I buy from him and have always received great service.
Posted by: Rotary'14 Jun 3 2022, 02:18 PM
PM thru the world works well for me
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)