Printable Version of Topic
Click here to view this topic in its original format
914World.com _ Member Vendors _ Porsche 914
Posted by: yello914 May 18 2005, 02:16 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago and have also been commercial clear anodized for added finish protection. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 (shipping included). This includes all four pieces. Will ship worldwide.
Attached image(s)
Posted by: yello914 Jan 24 2007, 12:19 AM
ITEMS ARE STILL AVAILABLE
Posted by: kconway Feb 28 2007, 10:01 PM
Bumpin this up just in case. I've seen these and the fit and finish is fantastic.
Kevin
Posted by: yello914 Feb 28 2007, 10:53 PM
Bumpin this up just in case. I've seen these and the fit and finish is fantastic.
Kevin
Thanks for the positive feedback Kevin
Posted by: kconway Mar 1 2007, 09:37 AM
Can I get these in a black powdercoat finish?
Kevin
Posted by: yello914 Mar 2 2007, 02:53 PM
Can I get these in a black powdercoat finish?
Kevin
What finish are you looking for? Flat, Satin, Gloss ??
Posted by: kconway Mar 3 2007, 09:44 AM
Can I get these in a black powdercoat finish?
Kevin
What finish are you looking for? Flat, Satin, Gloss ??
I think satin would probably match the plastic pieces the best.
Posted by: yello914 Mar 5 2007, 08:58 PM
Can I get these in a black powdercoat finish?
Kevin
What finish are you looking for? Flat, Satin, Gloss ??
I think satin would probably match the plastic pieces the best.
Kevin, for cost effective reasons, I will need to check with my plater to see if he is willing to add a couple of sets to an upcoming "black-satin finish" run. I'm waiting on a bunch of sets I sent out to be clear anodized so I will follow up with him in the morning and will keep you posted. Thanks again for your inquiry.
RP
Posted by: kconway Mar 5 2007, 11:26 PM
Cool, let me know. You getting the "silver car" together yet? By the way, was that a silver metallic paint? I'd like to get Pony to give me an estimate on body and paint work. My car is Alaska Blue Metallic and I heard metallics are a little tougher to spray.
Kevin
Posted by: yello914 Mar 8 2007, 12:46 AM
Cool, let me know. You getting the "silver car" together yet? By the way, was that a silver metallic paint? I'd like to get Pony to give me an estimate on body and paint work. My car is Alaska Blue Metallic and I heard metallics are a little tougher to spray.
Kevin
Silver project is currently on hold as we prep an original 1973 2.0 for this weekends Porsche swap meet in Costa Mesa. You may want to take a look at this car as it is nearly unmolested and in excellent shape. I have all the original paperwork (service records, original window sticker, purchase agreement from Rusnak Porsche in Pasadena and so on). Color is Delphi Green with black interior). This car looks like it's been sitting in a time capsule (no cracks or rips in the interior and the paint is original not a respray).
RP
Posted by: bd1308 Mar 18 2007, 10:41 AM
Still available?
Posted by: Luke M Mar 20 2007, 04:27 PM
Send me a pm when these become available for sale. Thanks,
Luke
Posted by: dr914@autoatlanta.com Apr 6 2007, 03:32 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 plus shipping. This includes all four pieces. Will ship worldwide.
Truly a fabulous product and highly recommended. We will post some pictures as we install a set on the 916!!!!
Posted by: yello914 Apr 12 2007, 03:02 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 plus shipping. This includes all four pieces. Will ship worldwide.
Truly a fabulous product and highly recommended. We will post some pictures as we install a set on the 916!!!!
Thanks for the compliment and your recommendation Dr. 914 !
Posted by: RSWannabe Apr 22 2007, 12:57 PM
Do you have these available now? I need a set for my six rebuild.
Posted by: woobn8r Apr 23 2007, 03:41 PM
Any more Black Satin sets available?
Please PM me if they are (or will be)
Cheers,
Sean
Posted by: yello914 Apr 23 2007, 08:01 PM
I'm hoping to have complete sets available in a week or so.
The plater I've used in the past has been lagging and has promised to have them ready in a week.
I will keep you all posted -
Thank you all for being patient!
yelo914
Posted by: kconway Apr 23 2007, 08:11 PM
Rudy,
I never heard back from you whether or not the black satin powdercoat is available and at what cost. Any info on that?
Kevin
Posted by: turbo914v8 Apr 23 2007, 10:38 PM
Rudy,
I never heard back from you whether or not the black satin powdercoat is available and at what cost. Any info on that?
Kevin
I would be interesyed in a set of the black satin powdercoat. Please PM me if this gets off of the ground.
Posted by: burton73 May 1 2007, 11:53 PM
I still need a set for my 914-6 if you have me on the list.
Bob Burton
burtonplastics@aol.com
Posted by: seanery May 4 2007, 12:44 PM
I'm in for a set....PM me if/when available.
-sean
Posted by: bob May 6 2007, 06:45 AM
I'm in for a set as well....
-bob
Posted by: kconway May 20 2007, 12:26 PM
Rudy,
I never heard back from you whether or not the black satin powdercoat is available and at what cost. Any info on that?
Kevin
Rudy/Frank,
What up with these? Any black yet?
Kevin
Posted by: fgregg May 22 2007, 11:28 AM
Let me know when you have the thresholds in stock again. Do you have the stainless screws also?
F Gregg
Posted by: fgregg May 27 2007, 09:06 AM
Let me know when you have the thresholds in stock again. Do you have the stainless screws also?
F Gregg
I want to order a set of the threshold sills and a set of the hardware with SS screws. I do not use Pay Pal but will send a money order. Address? Total charge?
Frank Gregg
Posted by: burton73 May 31 2007, 11:14 AM
Any word!!
Posted by: burton73 Jun 6 2007, 11:09 PM
Hi Raul,
Got my set. They are great. I took them into work and opened the box and put the set I got used for $50. Next to yours. Yours looked so perfect that I tried to glass bead the used ones to sell them and they did not come out very good. Yours are so good and will make my car just like new with the rest of my restoration. All the markings are in the right place when I matched them up on the table.
Very, very happy with them.
Bob Burton
Posted by: McMark Jun 7 2007, 12:38 AM
I just got the set for the WCR raffle, and let me well you these things are accurate and beautiful. These are extremely top notch parts. If you're thinking of buying used, put the money towards these instead.
Posted by: turbo914v8 Jun 7 2007, 02:01 PM
Hey, how can I get a set of these in black?
Posted by: yello914 Jun 7 2007, 02:57 PM
Hey, how can I get a set of these in black?
I'm hoping to have the black powdercoated sets available real soon. I just finished a large amount of clear anodized and will now focus on the black powdercoated parts.
Thanks for being patient.
Regards,
yelo914
Posted by: turbo914v8 Jun 7 2007, 03:03 PM
Hey, how can I get a set of these in black?
I'm hoping to have the black powdercoated sets available real soon. I just finished a large amount of clear anodized and will now focus on the black powdercoated parts.
Thanks for being patient.
Regards,
yelo914
OK great. Thanks for the quick reply. I will continue to wait patiently.
Posted by: neo914-6 Jun 8 2007, 09:27 AM
Any silver sets avail, how do I pay for them? I asked about these last year. 
Posted by: Luke M Jun 8 2007, 01:28 PM
Just ordered a set.
Posted by: yello914 Jun 8 2007, 03:55 PM
Any silver sets avail, how do I pay for them? I asked about these last year.
The aluminum pcs are clear anodized and the pcs do look silver in color.
As for payment, you can pay via PayPal (yeloporsch@aol.com) or mail a money order.
Thanks for the inquiry neo. PS - You have one kelw 914!
Best Regards,
yelo914
Posted by: yello914 Jun 8 2007, 03:57 PM
Just ordered a set.
Thank you for your business Luke!
Posted by: neo914-6 Jun 9 2007, 09:00 AM
Any silver sets avail, how do I pay for them? I asked about these last year.
The aluminum pcs are clear anodized and the pcs do look silver in color.
As for payment, you can pay via PayPal (yeloporsch@aol.com) or mail a money order.
Thanks for the inquiry neo. PS - You have one kelw 914!
Best Regards,
yelo914
PayPal sent,
How do they hold up to nicks? If the powdercoated black are available, I'd prefer those. Where do I get new screws or rivets?
Thanks!
Posted by: yello914 Jun 10 2007, 07:06 PM
Any silver sets avail, how do I pay for them? I asked about these last year.
The aluminum pcs are clear anodized and the pcs do look silver in color.
As for payment, you can pay via PayPal (yeloporsch@aol.com) or mail a money order.
Thanks for the inquiry neo. PS - You have one kelw 914!
Best Regards,
yelo914
PayPal sent,
How do they hold up to nicks? If the powdercoated black are available, I'd prefer those. Where do I get new screws or rivets?
Thanks!
Parts do tend to nick as they have very fine lines (serrations) running across the entire length. The anodize process simply helps prevent the aluminum from oxidizing. I will be sending out a few sets to be powdercoated next week and am hoping the paint is not too thick, filling in the serrations.
I will keep you and a few other members posted.
Thank you for your business. Raul
Posted by: Luke M Jun 28 2007, 08:22 AM
I just received my set and I must say they look great. 
Very nice product and cant wait to put these on.
Thanks Raul for this great product. 
Luke
Posted by: yello914 Jun 28 2007, 04:11 PM
I just received my set and I must say they look great.
Very nice product and cant wait to put these on.
Thanks Raul for this great product.
Luke
Thanks for the positive feedback and for your business Luke!
Raul
Posted by: Lavanaut Jul 11 2007, 04:04 PM
Anyone have any pics of these installed?
Thanks 
Posted by: STL914 Jul 18 2007, 04:54 PM
Any idea how much a set with gold anodizing would be? Thinking of matching the gold "914" rear panel emblem.
Posted by: yello914 Jul 18 2007, 07:27 PM
Any idea how much a set with gold anodizing would be? Thinking of matching the gold "914" rear panel emblem.
Thanks for the inquiry STL914. I wish I could help but the outfit I use to plate only does commercial clear.
Best I could do is offer you an unfinished set and you would need to find a local plater to do the gold anodize.
Best Regards,
yelo914
Posted by: Garold Shaffer Aug 22 2007, 02:43 PM
received my set last week. A+++ product and service. Thank you!
Posted by: Lavanaut Aug 22 2007, 03:48 PM
Anyone have any pics of these installed?
Thanks
Posted by: woobn8r Nov 19 2007, 11:41 AM
I know it's been asked a few times before...."black available yet?"
Thanks,
S
Posted by: spaceshuttle Jan 23 2008, 07:43 PM
Bought and received a set of Raul's Sill plates. Great service and an even better product. It is quite obvious that these are a labor of love.
Thanks Raul,
Larry C.
Posted by: Twise Feb 1 2008, 07:24 PM
These are graet - I need in black for my six conversion. Ready to paypal now...
Posted by: RSWannabe Feb 3 2008, 06:58 PM
Payment sent for a set of sliver thresholds. Look forward to receiving them.
Posted by: Twise Feb 20 2008, 10:25 AM
Got mine yesterday - They are gorgeous. Thanks for the quick shipping.
Posted by: turbo914v8 Feb 20 2008, 01:19 PM
Great now available in black ready please PM me with details. I need a set.
Posted by: t collins Aug 17 2008, 06:38 PM
I just received my new threshold plates yesterday and I couldn't be any happier with them. They are a true work of art.
Thanks for the great service and an even better product.
Tom
Posted by: Lavanaut Aug 18 2008, 11:44 AM
I'd like a set in silver please. PM sent...
Posted by: moordi Oct 2 2008, 07:54 PM
Just wanted to add my praises to the chorus of other happy customers. I ordered a set of the silver thresholds and carpet rails. Everything was packed extremely securely and everything arrived in perfect condition. These are simply great products, Raul!
Posted by: computers4kids Nov 15 2008, 09:18 PM
I would like a set shipped to Visalia, CA 93292. Do you have the silver and black satin available?
Let me know thanks!
PS This will be my second set, I loved my first set.
Posted by: yello914 Nov 17 2008, 11:39 AM
I would like a set shipped to Visalia, CA 93292. Do you have the silver and black satin available?
Let me know thanks!
PS This will be my second set, I loved my first set.
Hello Mark,
Thresholds/Carpet rails are still available but only in commercial clear anodize. I did not like the results of parts that were plated in black anodize or satin black powdercoat.
Thanks again for your inquiry!
Best Regards, Raul
Posted by: computers4kids Jan 5 2009, 10:40 AM
Raul, thanks for the excellent service and door sills for another teener! 
Guys & Gals, if you want to add a nice finishing touch to your teener, especially a newly painted one....then you need a set of these aluminum sills. They are a work of art and fit like OEM.
Thanks again, Raul
Posted by: Millerdmsm Jan 21 2009, 02:19 PM
Raul,
I just received the sills and they are fantastic! Fit and finish are exceptional. Thanks for the quick turnaround and service.
Regards,
David.
Posted by: yello914 Jan 22 2009, 10:34 PM
Thanks for the positive feedback David. Good luck with your restoration.
Make sure you post some pics of your teener!
Best Regards, Raul
Raul,
I just received the sills and they are fantastic! Fit and finish are exceptional. Thanks for the quick turnaround and service.
Regards,
David.
Posted by: veltror Feb 9 2009, 07:28 PM
Just got my set here in the UK, magnificent, I cannot wait to see these fitted, but then again I do have like a ton of other things to do. Thanks Raul !!
Posted by: MDG Mar 6 2009, 12:12 PM
Raul, just received my 2 complete sets of sills. Fantastic work man. Crap, even the packaging is a work of art.
Once the cars are complete and these are installed I'll post a pic.
thanks again, a real pleasure to do business with you.
m.
Posted by: kconway Oct 21 2009, 08:29 PM
Just got my set and couldn't be happier. Ask about the optional hardware kit to install them 
Thanks Raul
Posted by: yello914 Oct 22 2009, 04:09 PM
Just got my set and couldn't be happier. Ask about the optional hardware kit to install them
Thanks Raul
Thanks for the positive feedback Kevin -
Best Regards, Raul
Posted by: RiqueMar Nov 12 2009, 12:38 PM
Is it possible to buy just the carpet sills? Or do you have to purchase a complete set of four?
Posted by: yello914 Nov 25 2009, 10:16 PM
Is it possible to buy just the carpet sills? Or do you have to purchase a complete set of four?
Thanks for your inquiry. A set of carpet rails is $75 plus shipping handling.
Posted by: detoxcowboy Nov 26 2009, 10:24 PM
Yellow 914 I order these from you and paid 3 weeks ago, I live in So. Cal. just as you do, after the first week and a half I contacted you and you said you would have them shipped to me last Wednesday, that was 8 days ago, can I get some feedback as to what is happening.. joe
Posted by: yello914 Nov 27 2009, 08:25 PM
Yellow 914 I order these from you and paid 3 weeks ago, I live in So. Cal. just as you do, after the first week and a half I contacted you and you said you would have them shipped to me last Wednesday, that was 8 days ago, can I get some feedback as to what is happening.. joe Joe, the anodizing company I used did not deliver the parts as promised and I ended up catching a real bad cold/flu early this week. My sincere apologies for they delay and or inconvenience.
Your package shipped this afternoon and is expected to arrive to you next week on Monday. I sent you a PM earlier today with tracking information.
Best Regards, Raul
Posted by: detoxcowboy Dec 4 2009, 10:30 PM
Yellow 914 I order these from you and paid 3 weeks ago, I live in So. Cal. just as you do, after the first week and a half I contacted you and you said you would have them shipped to me last Wednesday, that was 8 days ago, can I get some feedback as to what is happening.. joe Joe, the anodizing company I used did not deliver the parts as promised and I ended up catching a real bad cold/flu early this week. My sincere apologies for they delay and or inconvenience.
Your package shipped this afternoon and is expected to arrive to you next week on Monday. I sent you a PM earlier today with tracking information.
Best Regards, Raul
They arrived the next day after I questioned and they are Sweet Perfect A pro could not tell me they were'nt Porsche NOS.. Thank You Brother..
Posted by: yello914 Dec 8 2009, 04:24 PM
Yellow 914 I order these from you and paid 3 weeks ago, I live in So. Cal. just as you do, after the first week and a half I contacted you and you said you would have them shipped to me last Wednesday, that was 8 days ago, can I get some feedback as to what is happening.. joe Joe, the anodizing company I used did not deliver the parts as promised and I ended up catching a real bad cold/flu early this week. My sincere apologies for they delay and or inconvenience.
Your package shipped this afternoon and is expected to arrive to you next week on Monday. I sent you a PM earlier today with tracking information.
Best Regards, Raul
They arrived the next day after I questioned and they are Sweet Perfect A pro could not tell me they were'nt Porsche NOS.. Thank You Brother..
Thanks for the positive feedback Joe and again, my apologies for the delay.
Best Regards, Raul
Posted by: johnnie5 Dec 26 2009, 01:34 PM
Ok, so I finally got my sills and rails installed. They had been sitting on a shelf in the garage along with a few other project parts for longer than I am willing to admit. The 'whats your winter project' thread actually got me movitated to do some of these long overdue projects. I couldn't be happier with them, they are truly a work of art. Thank you again Raul!
I chose to use stainless button head screws instead of plastic rivits. Here are some pics...
Attached image(s)
Posted by: sgrisanti Jan 19 2010, 01:15 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 plus shipping. This includes all four pieces. Will ship worldwide.
Do you still have these available? What is shipping to Somers NY 10589
Posted by: yello914 Jan 19 2010, 10:12 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 plus shipping. This includes all four pieces. Will ship worldwide.
Do you still have these available? What is shipping to Somers NY 10589
Items are still available -
Shipping/Handling to NY is ~$20
Thank You for the inquiry.
Posted by: yello914 Jan 19 2010, 10:24 PM
Ok, so I finally got my sills and rails installed. They had been sitting on a shelf in the garage along with a few other project parts for longer than I am willing to admit. The 'whats your winter project' thread actually got me movitated to do some of these long overdue projects. I couldn't be happier with them, they are truly a work of art. Thank you again Raul!
I chose to use stainless button head screws instead of plastic rivits. Here are some pics...
John, thanks again for your business and for the positive feedback. Your 914 is a true example of hard work and dedication!
Best Regards, Raul
Posted by: burton73 Feb 2 2010, 01:50 PM
Hi Raul,
I have a set of these in silver for my 6. Do you have a set in Black for my V8 blue car?
Thanks,
Bob
Posted by: yello914 Feb 3 2010, 05:33 PM
Hi Raul,
I have a set of these in silver for my 6. Do you have a set in Black for my V8 blue car?
Thanks,
Bob
Hey Bob,
Good to hear from you again! I wish I had good news for you but I was never able to produce these parts in a black finish. I tried several different finishes (black anodizing/black powdercoating) but was never satisfied with the results. The issue with black powdercoating is the fine lines (serrations) become flooded when the powder is baked and the black anodize scratches with normal wear/tear and ends up looking like crap in no time. I believe the OEM black plastic sills/carpet rails are still available and can source them from our friends at Automobile Atlanta. Thanks again for your continued interest/support!! Raul
Posted by: gary g May 7 2010, 11:23 AM
morning, Raul
did you see my PM dtd May 1st I think?
are your threshold and carpet rail sets available?
thanks, Gary 
Posted by: yello914 May 7 2010, 06:37 PM
morning, Raul
did you see my PM dtd May 1st I think?
are your threshold and carpet rail sets available?
thanks, Gary
Sorry about that Gary, I didn't receive your PM dtd May 1st.
Items are still available, will send you a PM with all the details.
Thanks for your inquiry!!
Raul
Posted by: pilothyer May 26 2010, 11:10 AM
Hello Raul.....I am interested in a set of these...please PM with information......Thanks.. Jerry
Posted by: gary g Jun 6 2010, 04:41 PM
Hi Raul
I responded to your PM re prices and approx 10 days from the plater.
Anything happening?????
Any info, I will post a payment to paypal as soon as you are ready
thanks
Gary
Posted by: Mike Knox Jun 17 2010, 04:01 PM
Hi Raul,
I'd like to order a set of carpet rails and SS screws for the install. Is this option still available?
THANKS!!
Mike Knox
Posted by: yello914 Jun 23 2010, 12:49 PM
Hi Raul,
I'd like to order a set of carpet rails and SS screws for the install. Is this option still available?
THANKS!!
Mike Knox
FOLKS, MY APOLOGIES FOR NOT RESPONDING TO YOUR EMAILS, I'VE BEEN SWAMPED WITH WORK AND AT HOME (TOO MANY PROJECTS ALL AT ONCE)..
I AM SORRY TO REPORT I WILL NEED TO START PRODUCTION OF NEW MATERIAL (EXTRUSION/FABRICATION/FINISHING) TO FILL THESE NEW REQUESTS. I AM HOPING TO HAVE ITEMS READY TO SHIP IN 4-6 WEEKS.
I'D LIKE TO APOLOGIZE FOR THE DELAY AND WILL KEEP YOU ALL POSTED.
THANKS IN ADVANCE TO ALL FOR YOUR CONTINUED SUPPORT AND PATIENCE.
BEST REGARDS, RAUL
Posted by: gary g Jun 23 2010, 07:07 PM
Raul,
not to worry,as for me, it took me 2 yrs to get off the fence and order
so if you can bear 2 yrs I will be happy
Gary
Posted by: Mike Knox Jun 24 2010, 06:42 AM
No sweat. Just let me know when carpet rails are ready so I can pay you. THANKS!!
Mike
Posted by: ztbell Oct 11 2010, 09:58 AM
Are the rails still available? I would like to purchase a set
Thank you
Posted by: ellisor3 Oct 23 2010, 09:00 AM
Same Here, any available??
Posted by: Niklas Nov 7 2010, 04:04 AM
I need a set.
Can you send it to me in sweden ?
Niklas
Posted by: Eric_Shea Nov 8 2010, 02:13 PM
Add me to this list.
Posted by: porbmw Nov 16 2010, 06:45 PM
Me "2"....
Thanks
Posted by: Eric_Shea Nov 20 2010, 12:01 AM
I sent an email a while back. I don't think this guy's still around... 
Posted by: ztbell Jan 2 2011, 06:27 PM
Are there any sets left ?
Posted by: cary Jan 13 2011, 08:33 AM
Are they still available ? I would like a set. Satin finish black.
Posted by: ppetion Jan 13 2011, 09:42 AM
would like one as well
Posted by: yello914 Mar 16 2011, 02:54 PM
MY APOLOGIES TO ALL FELLOW TEENERS FOR THE LONG DELAY!!
I HAVE COMPLETED PRODUCING AN ENTIRE NEW BATCH OF ALUMINUM PARTS AND CURRENTLY IN THE FINAL STAGES OF FABRICATION.
THE METAL THAT WAS PREVIOUSLY PRODUCED HAD HARDNESS ISSUES WHICH WAS CAUSING PROBLEMS DURING THE FABRICATION PROCESS.
I AM EXPECTING TO HAVE FULLY FABRICATED/FINISHED PARTS END OF THIS MONTH AND WILL BE TAKING ORDERS.
THANKS AGAIN TO ALL FOR YOUR CONTINUED PATIENCE AND SUPPORT.
BEST REGARDS, RAUL PAZ
Posted by: porbmw Mar 16 2011, 07:28 PM
MY APOLOGIES TO ALL FELLOW TEENERS FOR THE LONG DELAY!!
I HAVE COMPLETED PRODUCING AN ENTIRE NEW BATCH OF ALUMINUM PARTS AND CURRENTLY IN THE FINAL STAGES OF FABRICATION.
THE METAL THAT WAS PREVIOUSLY PRODUCED HAD HARDNESS ISSUES WHICH WAS CAUSING PROBLEMS DURING THE FABRICATION PROCESS.
I AM EXPECTING TO HAVE FULLY FABRICATED/FINISHED PARTS END OF THIS MONTH AND WILL BE TAKING ORDERS.
THANKS AGAIN TO ALL FOR YOUR CONTINUED PATIENCE AND SUPPORT.
BEST REGARDS, RAUL PAZ
Hey Raul
WELCOME back!
I think there are some of us that will welcome your product, also.....
Posted by: montoya 73 2.0 Mar 19 2011, 09:17 PM
Is your price still $150.00 for all four? Pm sent.
Posted by: yello914 Mar 21 2011, 05:18 PM
Is your price still $150.00 for all four? Pm sent.
Price is still $150 plus shipping/handling for a complete set.
Thank you for your inquiry!
Posted by: pilothyer Apr 8 2011, 01:42 PM
I definitely want a set or maybe two, I need them. Please let me know when and how you want payment.....Jerry
Posted by: yello914 Apr 8 2011, 02:46 PM
--------------------------------LATEST UPDATE---------------------------------------
Carpet rails have been fabricated/anodized and are ready to ship.
Thresholds are being fabricated as we speak and should be ready for anodizing mid next week. Anodizing will require 1-2 days.
I am expecting to have completed kits ready late next week and will be sending every interested member an email for shipping/payment details.
Thanks again to all for your continued patience and support!!
Best Regards, Raul
Posted by: ConeDodger Apr 8 2011, 08:51 PM
I am an interested member... 95628 for shipping purposes...
Posted by: ppetion Apr 8 2011, 09:21 PM
I am an interested member... 95628 for shipping purposes...
interested, send me info when ready.
Posted by: porbmw Apr 8 2011, 10:52 PM
Hi
When you're good to go, please let me know costs etc re 2 complete sets to ship to 98230
Thanks
Paul
Posted by: TurboWalt Apr 9 2011, 12:43 AM
Add me to the list when sets are available.
Walt
Posted by: clapeza Apr 9 2011, 05:01 PM
--------------------------------LATEST UPDATE---------------------------------------
Carpet rails have been fabricated/anodized and are ready to ship.
Thresholds are being fabricated as we speak and should be ready for anodizing mid next week. Anodizing will require 1-2 days.
I am expecting to have completed kits ready late next week and will be sending every interested member an email for shipping/payment details.
Thanks again to all for your continued patience and support!!
Best Regards, Raul
Any chance of just getting a single carpet rail?
Chester
Posted by: wky930 Apr 11 2011, 12:35 AM
I'm interested in 2 sets and my preference is the black anodized ones.
Posted by: mharmon Apr 11 2011, 04:07 PM
Hi Raul,
I'm interested in a complete set as well.
Thanks.
Mike
Posted by: cconcepcion Apr 16 2011, 03:03 AM
I'm in for a set-black anodized please.
I'm @ 85383- Peoria, Az
Posted by: Mike Knox Apr 16 2011, 04:53 PM
Hi Raul!!
You wrote
"Carpet rails have been fabricated/anodized and are ready to ship. Thresholds are being fabricated as we speak and should be ready for anodizing mid next week. Anodizing will require 1-2 days. I am expecting to have completed kits ready late next week and will be sending every interested member an email for shipping/payment details. Thanks again to all for your continued patience and support!!
Best Regards, Raul"
I'm still interested in a set of carpet rails. I was thinking in terms of brushed aluminum. Is that available? My carpet is charcoal gray, and my car is wine purple with gray trim on the outside and gray leather with purple leather trim on the inside. What would you recommend?
Just let me know when and where and how much I owe you!!
THANKS!!!
Mike
Posted by: pilothyer Apr 16 2011, 05:21 PM
Hello Raul.....I definitely want two complete sets as soon as I can get them........Please let me know when to pay.
Jerry
Posted by: yello914 Apr 18 2011, 11:58 AM
--------------------------------LATEST UPDATE---------------------------------------
Carpet rails have been fabricated/anodized and are ready to ship.
Thresholds are being fabricated as we speak and should be ready for anodizing mid next week. Anodizing will require 1-2 days.
I am expecting to have completed kits ready late next week and will be sending every interested member an email for shipping/payment details.
Thanks again to all for your continued patience and support!!
Best Regards, Raul
Any chance of just getting a single carpet rail?
Chester
PM sent
Posted by: yello914 Apr 18 2011, 12:05 PM
Hi Raul!!
You wrote
"Carpet rails have been fabricated/anodized and are ready to ship. Thresholds are being fabricated as we speak and should be ready for anodizing mid next week. Anodizing will require 1-2 days. I am expecting to have completed kits ready late next week and will be sending every interested member an email for shipping/payment details. Thanks again to all for your continued patience and support!!
Best Regards, Raul"
I'm still interested in a set of carpet rails. I was thinking in terms of brushed aluminum. Is that available? My carpet is charcoal gray, and my car is wine purple with gray trim on the outside and gray leather with purple leather trim on the inside. What would you recommend?
Just let me know when and where and how much I owe you!!
THANKS!!!
Mike
PM SENT
Posted by: Towarish May 5 2011, 03:04 PM
Did anybody get the new treshholds yet ????
Posted by: Mike Knox May 10 2011, 02:30 PM
Hi Raul!!
I got your PM, and sent the $$$ for the carpet rails. I'll let you know when they arrive.
YPAF!!
Mike
Posted by: yello914 May 10 2011, 03:36 PM
Hi Raul!!
I got your PM, and sent the $$$ for the carpet rails. I'll let you know when they arrive.
YPAF!!
Mike
Thanks for your order Mike, your parts will ship tomorrow morning via Fed Ex.
I will send you a PM tomorrow with all the shipping details.
Best Regards, Raul
Posted by: ConeDodger May 14 2011, 04:32 PM
Did anybody get the new treshholds yet ????
I got mine on Friday. I would have gotten it Thursday bit it was sent FedEx with my signature required. I was napping, the driver wouldn't accept my wife's signature.
I put it on in about 1/2 an hour yesterday. It looks great!
I'm not sure all that security is necessary though...
Overall, a great product!
Posted by: yello914 May 14 2011, 05:43 PM
Did anybody get the new treshholds yet ????
I got mine on Friday. I would have gotten it Thursday bit it was sent FedEx with my signature required. I was napping, the driver wouldn't accept my wife's signature.
I put it on in about 1/2 an hour yesterday. It looks great!
I'm not sure all that security is necessary though...
Overall, a great product!
Thanks for the positive feedback and sorry for the inconvenience with FedEx.
Best Regards, Raul
Posted by: Mike Knox May 14 2011, 06:23 PM
Raul
I got mine today via Fedex. My deliverer, who is easy on the eyes BTW, did not require a signature. 
These things are BEAUTIFUL!! 
I'll be putting them on the car this coming week just before I reinstall my seats.
My project is almost done. 
Raul, thanks for creating this fabulous accessory. Actually, it's more of a necessity than accessory. 
THANKS AGAIN!!
Mike
Posted by: yello914 May 14 2011, 07:09 PM
Raul
I got mine today via Fedex. My deliverer, who is easy on the eyes BTW, did not require a signature.
These things are BEAUTIFUL!!
I'll be putting them on the car this coming week just before I reinstall my seats.
My project is almost done.
Raul, thanks for creating this fabulous accessory. Actually, it's more of a necessity than accessory.
THANKS AGAIN!!
Mike
Mike, glad to hear your parts arrived as promised and thank you very much for the positive feedback and for posting!!
Cheers, Raul
Posted by: echocanyons May 17 2011, 08:03 PM
To anyone considering these.... These are a top notch reproductions that have a very stock finish. I am very happy to get these and it as more than worth the wait.
Thanks again Raul 
Posted by: montoya 73 2.0 May 21 2011, 10:13 PM
Raul,
I received the package a few days ago, But just opened it now and oh they are beautiful! They are top notch craftsmanship.
They are going to make someone very happy when they win them at WCR 2011! Thank you very much!!!
Posted by: JRust May 24 2011, 10:00 PM
Raul,
I received the package a few days ago, But just opened it now and oh they are beautiful! They are top notch craftsmanship.
They are going to make someone very happy when they win them at WCR 2011! Thank you very much!!!
I haven't seen them in person yet Raul. I know they will be ahuge hit at WCR. Thanks so much for your contribution. Wish you could be there to see the smile on one lucky teener's face
Posted by: yello914 May 24 2011, 11:15 PM
Raul,
I received the package a few days ago, But just opened it now and oh they are beautiful! They are top notch craftsmanship.
They are going to make someone very happy when they win them at WCR 2011! Thank you very much!!!
I haven't seen them in person yet Raul. I know they will be ahuge hit at WCR. Thanks so much for your contribution. Wish you could be there to see the smile on one lucky teener's face
Thanks again Jamie and to all who were kind enough to provide positive feedback. I know these parts took way too long to produce so thank you all again for hanging in there and for the continued support!
Wish I could make it to this years WCR but my seven year old kid is just getting started with the all-star baseball team so we are in for a busy spring/summer season.
Cheers!
Raul
Posted by: LotusJoe Jun 2 2011, 01:03 PM
Raul,
Got my thresholds an carpet rails yesterday. Very nice quality and well made.
Thanks!!
Joe Irwin
Posted by: jimzrx Jun 13 2011, 07:47 PM
Would like to order a set with the brushed aluminum.
Jim
37919
Posted by: yello914 Jun 14 2011, 09:52 AM
Would like to order a set with the brushed aluminum.
Jim
37919
PM sent
Thanks
Posted by: fernando Flamenco Jun 16 2011, 07:08 PM
Would like to order a set in satin black. Texas 78575. Fernando.
Posted by: yello914 Jun 16 2011, 10:20 PM
Would like to order a set in satin black. Texas 78575. Fernando.
Fernando, you're in luck.. I have one more black anodize kit ready to ship.
PM sent
Thanks, Raul
Posted by: Towarish Jun 17 2011, 03:31 PM
I was really surprised about the excellent quality of your product. Now I need more for me and my friends. ....and believe me or not : 1 set goes into a 916 !
pm sent
Posted by: yello914 Jun 17 2011, 03:56 PM
I was really surprised about the excellent quality of your product. Now I need more for me and my friends. ....and believe me or not : 1 set goes into a 916 !
pm sent
Thank you very much for the positive feedback!
I am honored to hear these parts are worthy enough to go into a 916 !!!
PM Sent -
Cheers,
Raul
Posted by: Harpo Sep 25 2011, 04:09 PM
I would like to order a set in satin black also. Please PM me with the details.
Thanks
David aka Harpo
Posted by: yello914 Sep 26 2011, 12:33 PM
I would like to order a set in satin black also. Please PM me with the details.
Thanks
David aka Harpo
PM SENT
Posted by: Harpo Oct 6 2011, 03:44 PM
I just received my today, they look great
David
Posted by: wky930 Oct 10 2011, 03:05 AM
I would like to order two sets of black thresholds.
Posted by: yello914 Oct 10 2011, 11:33 AM
I would like to order two sets of black thresholds.
PM SENT
Posted by: yello914 Feb 1 2012, 12:22 AM
STILL AVAILABLE..
Posted by: boogie_man Mar 28 2012, 04:01 PM
Just got my engine bolt kit !!! Very nice workmanship, thanks !!
Posted by: yello914 Jul 18 2012, 12:21 PM
Posted by: johnpierre Jan 18 2013, 01:35 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago and have also been commercial clear anodized for added finish protection. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 (shipping included). This includes all four pieces. Will ship worldwide.
hello yello 914
are these still avaliable?
Posted by: yello914 Jan 22 2013, 11:33 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago and have also been commercial clear anodized for added finish protection. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 (shipping included). This includes all four pieces. Will ship worldwide.
hello yello 914
are these still avaliable?
Still available. Thanks for the inquiry.
Posted by: johnpierre Feb 5 2013, 06:28 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago and have also been commercial clear anodized for added finish protection. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 (shipping included). This includes all four pieces. Will ship worldwide.
hello yello 914
are these still avaliable?
just wanted to let everyone know that i just received door thresholds and carpet rails this past weekend. shipping was fast, and the product look f'n great. i can't wait to install these. pic to follow. thank you yello 914 for this great product. jp.
Still available. Thanks for the inquiry.
Posted by: yello914 Feb 6 2013, 07:04 PM
NEW reproduced aluminum threshold plates and carpet rails for your Porsche 914-6 or 914-4. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago and have also been commercial clear anodized for added finish protection. Holes were drilled & countersunk with a CNC machine so they are precise and accurate. Countless hours went into die engineering and nothing was spared to reproduce these hard to find items.
Replace those beat up thresholds & carpet rails and give your 914 a clean update! I guarantee you will be happy every time you open your car door.
Sets are sold for $150 (shipping included). This includes all four pieces. Will ship worldwide.
hello yello 914
are these still avaliable?
just wanted to let everyone know that i just received door thresholds and carpet rails this past weekend. shipping was fast, and the product look f'n great. i can't wait to install these. pic to follow. thank you yello 914 for this great product. jp.
Still available. Thanks for the inquiry.
Thanks for the positive feedback JP!! Looking forward to some pics of your restored interior! Cheers, RP
Posted by: Babydogforme@me.com May 22 2024, 07:57 PM
Please put me on the list for some Threshold plates
Posted by: bdstone914 May 24 2024, 06:52 AM
@http://www.914world.com/bbs2/index.php?showuser=28139
Please put me on the list for some Threshold plates
[/quote]
You should contact the seller by a message to him or email. The last reply to this thread before yours was in 2013. He may not still make them.
If nit 914rubber.com makes them. 
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)