URO Parts has reproduced Porsche Brake Line Grommet https://www.uroparts.com/uro/inventory/show/13462, which are located at the front and rear center tunnel bulkheads in the Porsche 356B, 356C, 356SC, 911, 912, 914 and 930! These grommets have the same shape and appearance as OE, and are essential for a proper restoration. They're available from Porsche specialists such as:
Sierra Madre Collection in Southern California
https://sierramadrecollection.com/Brake-Grommet-p18069.html
Auto Atlanta in Marietta, GA
http://www.autoatlanta.com/Porsche-Brake-Line-Grommet-Parts-PN-B91435565100.html
If you have any questions about this reproduction of Porsche Brake Line Grommet 91435565100, feel free to contact us at 800-290-5555 or "sales @ uroparts . com" (remove spaces).
Attached image(s)
Do you have the spring clip that secures them.
Sorry Mepstein, we don't make spring clip 914 355 652 00 and don't have plans to do so. Most folks just reuse their old ones (which can be bead blasted and re-blackened if necessary), and there are commercially available clips that are similar if someone loses one. To make them, we'd have to run 10K and the demand just isn't there.
McMaster Carr has a pretty good selection of zinc-plated and stainless steel spring clamps that could be painted: https://www.mcmaster.com/tension-clamps
Great News Drew!
^ Thanks for the bump, just added the link to the grommet at Sierra Madre.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)