URO Parts has been offering its gorgeous reproduction License Plate Light https://apaindustries.com/parts/8406 since 2015, and has received nothing but stellar feedback. Aside from omitting trademarked logos and marks, these brand-new light assemblies have the same dimensions and appearance as OE, and are essential for a proper restoration. They're available from Porsche specialists such as:
Sierra Madre Collection in Southern California
https://sierramadrecollection.com/License-Plate-Light-With-Bulb-914-70-76-p26832.html
Auto Atlanta in Marietta, GA
http://www.autoatlanta.com/Porsche-Auatl-License-Light-2-Required-Per-Car-914-Parts-PN-S91463160100.html
If you have any questions about this reproduction of Porsche License Plate Light 91463160100, feel free to contact us at 800-290-5555 or "sales @ uroparts . com" (remove spaces).
Attached image(s)
These look great - but the big question: which way should they be oriented when installed? Small arcs close to the bumper or away from?!
^ Good question Brian, the "rainbow" in the lens should be toward the license plate.
Be careful when connecting the wiring to the lights; the positive wire goes to the copper tab and the ground wire goes to the silver tab. If you accidentally connect the positive wire to the sliver tab, you'll create a direct short to ground, which will cook the full length of the positive wire. Many thanks to George at AA for the reminder to not mix up the wires.
***Glad I saw this; getting ready to install too
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)