Rebuilding a pedal set can be a frustrating and time consuming project for the first timer. I have been building pedal sets for over 10 years with many satisfied customers.
I offer rebuilt pedal sets for 914, 911, and 912 Porsche's on an outright or exchange basis. Price is $275 exchange. A refundable core charge of $75 (for 914's, other Porsche models vary ) applies if the rebuilt set is required before the core is returned. Additional charges may apply if parts are missing or broken or the core is not rebuildable.
The pedal sets are chemically stripped or media blasted clean. The small parts are zinc plated to prevent internal and external rust. The large parts are powder coated satin black. Bronze bushings are used to replace all bushings. New clutch springs are used if needed or brake springs are replated if in good condition or replaced with new springs.
New rubber stoppers are used.
Flat shipping of $16 in the U.S. Will ship worldwide at cost. I have in stock parts to build most Porsche pedal sets for 911's up to 1987 and all 914's. This is the same service that is listed on Pelican's web site. Emergency next day shipping is available.
Feel free to contact me with any questions.
bdstone914 ( screen name)
cell phone 951 536 7478
bdstone914@aol.com
Bruce Stone
Attached image(s)
These look great! What a cool service~
Can you powdercoat the pedals in silver instead? Thanks- jzn
I had to bump this, it is sooooooo bueatiful OMFG
nice work bruce!!
I will be getting some from you very soon.
Picked mine up today. VERY NICE.
Hey Bruce
Cant wait to get mine
Got them in. Thank you Bruce Stone and Auto Atlanta for the gas pedal and the pedal rubbers. Much better now.
Before:
After:
Now it makes the rest of the car look bad!
Bruce! I need pedals.
joe@914rs.com
Bump
Still building pedal sets.
Bruce
Got mine Bruce, awesome work thanks:
http://smg.photobucket.com/user/bergie_roost/media/Cyclops/DSCN6612_zps83e73634.jpg.html
Must have! At some point.
Bump
Still building the prettiest pedal sets.
Bought a set some time back, they work as good as they look!!!
Cheers and thanks!
Still building pedal sets for all 914, 914-6 and 911 air cooled all years. Available with or with a core. Contact me at bdstone914@aol.com for immediate availanility.
Bruce is restoring my pedal set
Just received my pedal set. Beautiful work, looks like new. Can't wait to install it. Just waiting for the new clutch cable to come in. If I have to pull out the center console (PIA with A/C unit), I figure I will take care of everything in there at once.
BTW, my pedal area is pretty clean but in looking at some of the pics, that is not always the case. APS paint can provide you a spray can of 2K, epoxy based paint mixed to factory color. You just hit a trigger button at bottom of can to activate the chemicals. Gives you the durability of a two part coating without needing a paint gun (good for the hell hole area also). No connection, just passing along info based on experience.
Hey Bruce! Just sent payment via PayPal for my rebuilt pedal set! Now that floor pans are solid and rust taken care of, I am about to start putting the interior back together and your pedal set is going to be perfect for my "new" interior. Thanks!
Bump to the top
You have to have a few sets ready to sell for the G&R Swap meet this Sunday
at your shop in Riverside. What nice work!!
Bump for updated info.
NOPE
Whoops!
Bump
Have installed several, Great Service..
I am a new member and a very recent 914 owner. When I press my accelerator it feels like I'm Fred Flintstone and my foot is crunching gravel. I think I need your services (among many other items.
Just saw this, will check and advise. Thanks!
I need my pedal set done. Do you prefer an exchange or to rebuild my set? Either way is fine.
Hit me up Bruce. I’m ready to send mine.
Bruce is absolutely to go-to guy for these. He did two for me a couple months ago.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)