Printable Version of Topic

Click here to view this topic in its original format

914World.com _ Member Vendors _ 1.7 cold air intake

Posted by: dr914@autoatlanta.com Jun 1 2007, 04:38 PM

Brand new product! Cold air intake for all 1.7 models. Easily replaces the messy oil bath air cleaner in one neat unit. Heavily chromed comes with instructions and hardware


$129.50


Attached thumbnail(s)
Attached Image

Posted by: klikkid3 Jul 15 2008, 02:17 PM

These still available? What type of gains would I be looking at with this on.
Thanks
Phill

Posted by: JazonJJordan Jul 25 2009, 04:30 PM

QUOTE(klikkid3 @ Jul 15 2008, 04:17 PM) *

These still available? What type of gains would I be looking at with this on.
Thanks
Phill


You gain oil-free hands, better flow and usually 7-10hp, but not certain. Only a dyno will tell if this change alone will release many horses. If it will respond much better w/o a filter then a high flow k&n type will definitely help. If not, then it might have no performance gain but better protection and maintenance at least.
Still a big improvement. Just my 2cents however. Enjoy!

Posted by: URY914 Jul 25 2009, 05:46 PM

"7-10 hp"

Why is it that every after market gizmo says it will add 7-10 hp?



Posted by: JazonJJordan Jul 26 2009, 09:04 AM

I think if you add two, it will add 14-20hp.... lol-2.gif happy11.gif

Posted by: tat2dphreak Jul 27 2009, 01:05 PM

since a stock 1.7 is 80hp, do you really think you'll get 9-10%+ increase? really?

Posted by: underthetire Jul 27 2009, 01:34 PM

I made my own from autozone parts. Not even close to as nice as this one. I think it helped some at high RPMs. Gets the cooler air next to the engine lid for sure. (i have an air intake temp sensor for my megasquirt). AND ITS WAAAAY LOUDER!

Posted by: underthetire Jul 27 2009, 03:20 PM

QUOTE(underthetire @ Jul 27 2009, 12:34 PM) *

I made my own from autozone parts. Not even close to as nice as this one. I think it helped some at high RPMs. Gets the cooler air next to the engine lid for sure. (i have an air intake temp sensor for my megasquirt). AND ITS WAAAAY LOUDER!



BTW, I wish you had these when I made mine. Would have been the same price by the time I was done!

Posted by: JazonJJordan Aug 1 2009, 08:40 AM

QUOTE(tat2dphreak @ Jul 27 2009, 03:05 PM) *

since a stock 1.7 is 80hp, do you really think you'll get 9-10%+ increase? really?

No, really- I don't know. That's why I suggested 2 might add twice as much ~haha~.
If it really was the bottleneck -which they sometimes are- that holds down flow; while all the other potentials are there, then maybe so. Real numbers come from experience and a dyno however. 10% does sound -way-optimistic; wacko.gif just the same.

Posted by: URY914 Aug 1 2009, 12:19 PM

George never said you pick-up any gains in HP.

I think "cold air" maybe a little misleading but who's to say. He never saids the cold air will increase performance.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)