Printable Version of Topic

Posted by: Mikey914 Jul 6 2007, 09:01 PM

Well I talked about it in the past, I finally did it. I've got a die cut for the rear seal that is no longer available. I got back my samples and it's as good as the original. This is a reproduction of the Porsche part 914-504-117-10 (for reference).

I will be receiving my first production run 7-16-07. They will begin shipping the 17th.

The best part is they will only be $22 + your choice of shipping.

Right now I only need to know who wants them and how many. I will do Paypal, or your your choice of payment when ready to ship.

Get'em while they're cheap!

These were originally $44 at the dealer.

Posted by: Gint Jul 6 2007, 10:05 PM

I'll take two please.

Posted by: George H. Jul 6 2007, 10:55 PM

i'll take 2 as well

Posted by: ScooterD Jul 7 2007, 12:40 AM

Sign me up for one.
Thanks.
Scooter

Posted by: whitey Jul 7 2007, 12:57 AM

I'm in for one.

Dave

Posted by: df2931 Jul 7 2007, 02:36 AM

I'll take one..
Thanks,
Danny

Posted by: xsurfer Jul 7 2007, 10:57 AM

Is this the seal for the sheet metal? Does it fit a 6 cyl.

Thanks
Gene

Posted by: Mikey914 Jul 7 2007, 02:55 PM

This was designed and fitted for the 4, I'm unsure of the diferences in the body at the seal mount. I would think it's the same, but check with the dealer, if the part number is the same it would work.
-Mark
PS part #914-504-117-10 for comparison

Posted by: Carrera916 Jul 7 2007, 09:03 PM

Hey!

That's great! I'd take two so let me know when u get it and I'll paypal you for these.

thanks!

Posted by: black73 Jul 8 2007, 01:36 PM

One please...

Posted by: Mikey914 Jul 8 2007, 09:50 PM

Here's a picture of my sample piece from the die proving run


Attached image(s)

Posted by: rfuerst911sc Jul 9 2007, 03:39 PM

Forgive my ignorance but is this the seal that goes around the engine compartment? It slides/fits into a channel that goes around the perimeter? If yes I'm in for one set. Thanks

Posted by: Al Meredith Jul 9 2007, 07:04 PM

I'll take three, (3) this is beginning to sound like an auction.

Posted by: Mikey914 Jul 9 2007, 10:59 PM

Yes this is the seal that goes into the steel channel, and goes on both sides of the engine tin between the engine and transmission. I will contact you when these are ready to ship.

Thanks,

-Mark

Posted by: Johny Blackstain Jul 10 2007, 05:46 AM

I'd like 2 as well & thanks.

Posted by: watsonrx13 Jul 10 2007, 06:14 PM

Mikey, I'd like (3), please.... thanks for getting this done....

-- Rob

Posted by: Mikey914 Jul 11 2007, 02:43 AM

I just got to thinking about your question a little further, you asked if it goes around the perimeter. It only goes on the back portion of the engine bay, above the transmission. The other 3 sides have a "z" channel that is different. These are available form several sources, but are significantly more than what I'm charging for the rear section. If you wish to opt out let me know and I will remove you from the list.
Thanks,
-Mark

Posted by: rfuerst911sc Jul 11 2007, 04:45 AM

Thanks for the clarification but I need this seal also so I'm still in.

Posted by: Mikey914 Jul 11 2007, 12:22 PM

Just picked up a PET catalogue. Illustration 801-10 does not show a different part number for the 6. Double check with the dealer, but I'l 99% sure that its the same for the 6 as the 4. Other 6 parts are notated as such.

-Mark

Posted by: craig downs Jul 14 2007, 12:13 AM

I would like 2 please

Posted by: t collins Jul 14 2007, 05:18 PM

Put me down for one, just let me know when to send payment.
Thanks,
Tom

Posted by: xperu Jul 16 2007, 10:52 AM

I'll take one, Thanks Mike

Posted by: jeeperjohn56 Jul 16 2007, 12:09 PM

Hey Mark! I'm in for one. please let me know when and where to send payment, I'll send adress. Thanks John

Posted by: patrick3000 Jul 17 2007, 07:16 PM

2 please, let me know where to send payment

thanks

karl

Posted by: 9146986 Jul 17 2007, 08:01 PM

I'm good for three. Let me know how and where to send payment. I'd prefer to mail a check, but whatever is easiest for you. Thanks! It looks good!!!

Posted by: kconway Jul 18 2007, 08:03 AM

I too will take one. Please let me know when to forward paypal funds and total shipped to Long Beach, CA. 90808.

Thanks,
Kev

Posted by: rigglet Jul 18 2007, 10:04 AM

Put me down for one, please!

Posted by: kconway Jul 22 2007, 09:12 PM

Got it quick and looks great! Thanks Mark.

Posted by: GWN7 Jul 22 2007, 11:39 PM

I'll take two...let me know a address to mail a money order to?

Thanks

Posted by: kckoch Jul 23 2007, 02:20 PM

I would like (2) two. Let me know how to pay!

Posted by: rfuerst911sc Jul 27 2007, 06:20 PM

Received mine today....................nice piece and fast service.

Posted by: swood Jul 28 2007, 02:43 PM

Bumpaliscious.....


Mark I'll take one. Long Beach, CA 90807

Thanks.

Posted by: clarkcou Aug 4 2007, 07:19 PM

I would like to buy one. My shipping address:

Randy Clark
1185 Wright Ave
Arnold, MD 21012

Please advise on shipping $, I will be glad to pay via PayPal.
Thank you,
Randy

Posted by: 70Sixer Dec 24 2007, 01:12 PM

Do you still offer the rear engine compartment seal for sale? I am interested.

Mark in Redmond, WA.

Posted by: Mikey914 Dec 24 2007, 04:15 PM

Do you still offer the rear engine compartment seal for sale? I am interested.

Mark in Redmond, WA.
________________________________________________________________
Still have them - Also have the other 3 seals. Just PM me with what you want. I can ship after Christmas.
-Mark

Posted by: fishdoc Dec 29 2007, 09:31 PM

I would like one please

thanks,
Eric

Posted by: mbdoc Jan 8 2008, 11:01 AM

Mark
Would like to get 2 of them please if they are still avvailable.
specializedservice@sbcglobal.net
Adrian