http://members.aol.com/engman10/rear.jpg
Please see http://engmanparts.com for details
M
I also have the trunk reinforcements for the rear sway bar mounts. http://engmanparts.com has all the details.
M
cool! do you also have brackets for mounting the sway bar inside the trunk, like they did on the GT's?
Andy
I am ignorant on that one. Is there a pic somewhere?
M
How about a pic of the trunk reinforcements and another of thier installed location?
Here is a pic of the reinforcements....
Attached image(s)
And the location is easy - right againt the rib at the top on each side... Shown is the drivers side shot from the rear...
Attached image(s)
Andy - here is borrowed pic of what I think you are referring to.
M
Attached thumbnail(s)
75-76 rear sway bar mounts - as shown below, Please see http://Engmanparts.com has all the details.
M
Attached image(s)
can the top still fit in the rear trunk with the sway bar installed as shown above?
The in trunk mount has not been made and is not currently available. This was a discussion Andy had on the subject a while back. If it WAS available it would not interfere with the top - too much distance between the two.
M
thought that looked odd, how does it mount then: from trailing arms or a arms to the reinforced trunk mount? you have any pictures of a rear sway bar setup installed with the brackets? this would be used with stock rear bars?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)