Printable Version of Topic

Click here to view this topic in its original format

914World.com _ Member Vendors _ Camber Boxes with Camber Plates

Posted by: Racer Chris Dec 9 2008, 09:35 AM

These camber boxes and sliding camber plate assemblies are designed and built by Tangerine Racing Products specifically for installation in 914s. They utilize a 3/4" monoball so any shock absorber can be accomodated with the correct bushings. The strut top will fit just below a f/g deck lid for maximum shock travel. Range of camber adjustment is at least 2.5 deg negative to 0 deg. Needle bearing thrust washers minimize friction for decreased steering effort/maximum sensitivity.

Price: $525 plus shipping

This is the complete kit, with bushings for a Ground Control double adjustable shock.
Attached Image
This is a camber plate assembly on a GC shock.

Posted by: Racer Chris Dec 9 2008, 09:40 AM

A special fixture is available to accurately position the camber boxes during installation.

Attached image(s)

Posted by: 9146986 Dec 9 2008, 07:12 PM

Very cool Chris!