Printable Version of Topic

Posted by: Mikey914 Dec 21 2008, 12:45 AM

As the volume of parts has grown I have had to centralize my operations onto my website to keep everything straight. It was a nice surprise for a member that wanted a bumper top and found out they weren't $375 any more.

You can find my parts and current pricing listed here-

http://shop.914rubber.com/

Posted by: stepuptotheMike Jan 2 2009, 02:19 PM

I need a Front main trunk seal 914-511-901-10 $60.00, but I don't see it on your website. Am I just blind?

Mike

Posted by: Mikey914 Jan 2 2009, 02:44 PM

They're not on the website for 2 reasons. First, the program I have for the webite only allows for 20 items for the shopping cart and I need to re-do the website, second the item requires alot of labor, I'm breaking out the gig to do up another 10 this weekend, I let them cure for a a day or two before I pack up to ship, so my quantity in stock is 0 and I have a back order for 2 right now. Good news is I do have a seal for the bulkhead and I can do a package for both for $75 if you want. I'll revise the list to include. I can have a seal to ship out for you by next week if you want a set (figure Wednesday).

Thanks

Posted by: stepuptotheMike Jan 2 2009, 02:52 PM

Sounds good.... that will give me time to get the channel cleaned out and repainted.

Let me know.

Mike

Posted by: rfuerst911sc Jan 2 2009, 07:10 PM

I'm going to need the main front trunk seal also. Please put me down for one. Thanks

Posted by: klikkid3 Jan 5 2009, 01:30 PM

Just wanted to tell you the Targa seals were perfect thankyou very much Mikey.

Posted by: charliew Jan 7 2009, 06:47 PM

Still waiting on my stuff. repair for front targa seal and both side window targa seals. Sent 80.00 awhile back. Your son called asking what I ordered and I replied. No hurry but it's been awhile.
Charlie

Posted by: Mikey914 Jan 10 2009, 12:36 AM

Pm me your email and full name I'll track and find. He did some of my shipping when he was home over the holidays.

Posted by: stepuptotheMike Jan 10 2009, 10:31 AM

When the front trunk seals are ready, are you going to put them on the website? or just post through here?

Hope to have my channel cleaned and repainted this weekend.



Mike

Posted by: Mikey914 Jan 10 2009, 12:51 PM

As they are limited in quantity I will post in the clasified. I'll hold onto one for you until I have a chance to hear from you.
Thanks,
Mark

Posted by: Chevota79 Feb 13 2009, 03:58 PM

Just wanted to say thanks for the seals I ordered from you. Very high quality and a perfect fit.

Posted by: '73-914kid Feb 13 2009, 10:56 PM

Mikey, how would I go about ordering your set of engine by seals?

Seems like a good price, so if you could please give me the details for ordering from you, it'd be much appreciated!

Thanks.

Posted by: Mikey914 Feb 14 2009, 12:13 AM

Just let me know what you need and your email address and I can paypal you an invoice.

Thanks,
Mark

Posted by: Vacca Rabite Feb 16 2009, 12:57 PM

Mike,

Have you considered making flexible low front spoilers/air dams? The one on the market now is crazy expensive, and seems to be somehting that would be right up your alley.

Zach

Posted by: luisqcosta Feb 17 2009, 05:38 AM

Mark!

I just got the seals you sent me. Excelent quality!

I will be putting them in place soon.

Thank you very much!


Luis from Portugal!

Posted by: Mikey914 Apr 15 2009, 07:51 PM

Due to some of the tooling costs I had to put off extruding some products that were running low. These are on order now, but will be out of stock for a little while. Sorry guys, but more new stuff on the way.

Posted by: sendjonathanmail Apr 16 2009, 08:22 PM

Can't wait for the front rubber bumper tops, any idea when they'll be ready?

Posted by: Mikey914 Apr 17 2009, 10:01 AM

Still about 2-3 weeks out on the first article. Will be shipping within 3 weeks after pending approval. Seems like an eternity I know, but these things take some time.

Posted by: Tom_T Apr 23 2009, 12:53 AM

Hey Mikey! ...always say that to my son too!

Are the dates above in red for 2009 or an older 2008 post???

I saw Front Bumper Top Seals on another Post that you're doing soon - is that the Top Pad / Enhancer Strip etc. along the top of the bumper to body??? I don't see it above - am I missing something? ...if so, how much? ..any pix of it?

If you do rear top pads that look better than the new one below &/or a better price than the "new" (NOS?) one I just got from PP for $375 + tax & S&H (lower one in att. pic.), then I'll send it back & get it from you! Frankly, PP's "new" one doesn't look much if any better than my dirty ole 36 year old OE one!

I need that Front Bumper Top Pad & L&R Horns/"Tits" for my 73 2L's repair - which of those are you doing, as they're all NLAs??

Also need both cowl seals each side, inner door seals both sides & outer lower window seals/scrapers - I see the door seals but not sure about the others on your list above - what about those & prices?

I may also need F&R Trunk Seal sets (including the F "blukhead" one - I think ) - if mine prove to be too far gone!?

Let me know - no huge rush, as I'm in the early parts gathering stages for my car's repair & resto to get back on the road again! I'll be doing the mechanicals first anyway, before I tackle the body stuff, so as not to have a new paint job screwed up by the mechanics crawling all over it!

Thanx!

COMPARISON OF MY SLIGHTLY DAMAGED 36 YEAR OLD OE REAR TOP PAD VS. PP's "NEW" ONE

Posted by: Mikey914 May 6 2009, 08:55 PM

Updated. 5/6/09

Posted by: rfuerst911sc May 9 2009, 02:55 PM

I just wanted to say I have purchased most of the items he makes and have recently started installing them. Great quality, fit and price Don't hesitate to buy these products.

Posted by: Tom_T Jun 7 2009, 04:13 PM

Hey Mikey - can you post some pix of the outside & inside of that F bumper top strip that I highlighted in red above pleeeez!?

If you already did so at another link, then give that unless you want to post that here too.

...did you end up using SS on the internal stiffeners & studs/bases for that top strip???

Any ETA on your L&R front rubber "tits" (bumper guards)?
...& rear bumper rubber top strip?

Pleeeez post pix of those when ready too!
Thanx!!

Posted by: barada Jun 13 2009, 08:52 AM

I need these.
The engine lid seal worked out great.
Fender seals "T" type (2) 914-559-155-10 $7.00
Vertical targa seals (2)kit 914-531-143/4-10 $14.00
Outer door to window seals (2) 914-531-873/4-10 $13.00
Targa to window seals (2) 914-531-185-10 $38.00

Thanks
Phillip

Posted by: Jerry75914 Jun 20 2009, 07:15 PM

I just received my engine decklid seal, and if I didn't know better I would swear it is an OEM part. Absolutely fantastic product!!! This will be the first place I look for ANY seal I need. Fantastic!

Posted by: Mikey914 Jun 22 2009, 01:24 PM

Thanks Jerry, more new stuff on the way!

Posted by: ghuff Jun 22 2009, 03:10 PM

Windshield exterior seal $20 replaces chrome
Rear Trunk Seal (front) 914-512-317-10 $14.00
Rear Trunk Seal main 914-512-317-10 $30.00
front blukhead seal only 914-511-902-10 $18
Fender seals "T" type (2) 914-559-155-10 $7.00
Outer door to window seals (2) 914-531-873/4-10 $13.00


Do you have the A-pillar seals that sit in the chrome and go against the triangle door windows?

Do you have the seals that go in the sail panel chrome trim and go against the window?

Sending you a PM with my email

Posted by: rick 918-S Jul 6 2009, 06:29 AM

Mike, I didn't see the link to your web site. can you post it?

Posted by: geniusanthony Jul 6 2009, 05:01 PM

914rubber.com

Posted by: Mikey914 Jul 6 2009, 09:47 PM

I do give my best pricing here, so drop me a PM or use the contact form on the site.

Thanks,

Mark

Posted by: '73-914kid Jul 25 2009, 05:26 PM

Just recieved the engine bay seal set and door handle seals. the quality is excellent. very impressed.
One question, the seals seem very long, are they meant to be cut to size/ perfect fit?

Posted by: Mikey914 Jul 26 2009, 06:25 PM

Yes I do provide them and most of my seals slightly longer than you will need them. I have recieved seals in the past and thought if these were just 1/8" longer they'ld fit perfectly. Well now they'll fit your car as well as you want them to.

Thanks again,
Mark

Posted by: tat2dphreak Aug 4 2009, 06:59 PM

are all of your seals/products on your website?

I'm about to go ape-shit on seal buying, and get a ton at once.

Posted by: ghuff Aug 4 2009, 07:11 PM

Mikey914, can you see my post above? I sent you a PM with the same contents. I need all of those seals.

Thanks!

Posted by: Mikey914 Aug 5 2009, 11:48 AM

Sorry I thought I had responded. Been kind of crazy lately. I'll get you an invoice this afternoon wen I'm back in the office. Sorry for the delay.

Posted by: ghuff Aug 5 2009, 01:07 PM

No problem. I understand, just want to get them heh. Car will likely be in the garage a bit anyways.

Posted by: westo2 Aug 7 2009, 09:57 AM

Hi Mark,
I'm looking for the:
full front trunk seal w/ Bulkhead seal
rear main trunk seal
and I assume the fender seals "t" type are the cowl seals in front of the windshield? If so, I'll take a set of those as well.

Also, I just replied on your pre sale for the 3 part main targa seal.

Thanks!

Posted by: steveherman Nov 4 2009, 12:35 AM

pm sent

Posted by: budman5201 Nov 7 2009, 12:35 PM

does your windshield to dash seal have the steel clamp on the inside so it just clamps around the stock channel or do i have to glue it in??
I am also interested in the one for the back window to engine lid if it has the clamp also....
thanks,
CHris

Posted by: Mikey914 Nov 7 2009, 09:55 PM

The rear has an aluminum clip so it will not rust. The front is made from Santoprene (better for the high temps in the sun) with a low clearance opening. I could have put the clip in, but it makes it harder to install with the windshield in. This seal is kept in place mainly by the close tollerence on the opening, but I cut mine about 1/8" longer than it needed to be and installed the corners first working my way to the center. This causes it to "over-center" and help hold it into place too. As it's not really a "seal" and a cosmetic piece it work out fine. Mine is also about 1/16" larger than stock making it hide the edge of the vinyl better.
Hope this helps.

Posted by: steveherman Nov 16 2009, 10:15 PM

HEY Mark
i am working on my shopping list for you.
can you update your list with everything you that you are now producing so i can do this once.
thanks
steve

Posted by: Mikey914 Nov 17 2009, 11:22 AM

Thanks Steve. I try to keep the list at the front page updated, but I know I need to add a few items right now. But the time you checkback I'll have it updated.

Thanks

Posted by: jsayre914 Nov 19 2009, 05:32 PM

pm sent

Posted by: Mikey914 Feb 7 2010, 10:47 AM

Updated parts list and pricing 2/7/10

Posted by: codices Feb 9 2010, 03:58 PM

Mark,

My parts came in this afternoon. Look good. Thanks for the fast delivery. I will order more later.

Dave

Posted by: underthetire Feb 9 2010, 04:58 PM

No more targa repair seal? I just can't swing 200 for the new one.

Posted by: Mikey914 Feb 9 2010, 05:40 PM

I can do one for you depending on where my stock is as I use the to make the main seal as a whole. I can do one for you right now no problem as I've just done a run not tool ong ago.

Posted by: southernmost914 Mar 15 2010, 02:10 PM

pm sent

Posted by: McMark Mar 24 2010, 11:02 AM

Mark, I need a few seals and PM sent.

Posted by: ConeDodger Mar 24 2010, 11:40 AM

I found a couple for you Marky...


Attached image(s)

Posted by: ConeDodger Mar 24 2010, 11:50 AM

Mark,
On a more serious note. I sent you a PM because I was concerned about what happened to a package I ordered from you. Tracking however indicates that you notified USPS that you would be shipping on the 11th of March, not that you sent it on the 11th. You didn't respond to my PM and I am assuming that something in my order is not yet available? If you can update me on what part is not currently available, I would be happy to pay separate shipping. Some of that order is desperately needed...
Rob

Posted by: Mikey914 Mar 27 2010, 10:56 AM

Rob, if USPS has been notified, I created a label, you should have got it.

PM me your email and I'll find it.

If it's lost, which I suspect is the case I'll get you your stuff. I have had this happen a couple of times more recently. I'm not sure if it's because I'm shipping more I see a higher incidence of this, or if it's just a fluke. Either way I'll make it right with you. I appreciate your patience, but if you don't recieve something in a reasonable amount of time please let me know.

Posted by: ConeDodger Mar 31 2010, 10:33 PM

Got my package today with my complimentary 914Rubber.Com T-Shirt. The shift knob came wrapped in a microfiber towel so I can polish my knob Thanks Mark! Now I have to remember what I ordered so I can get all of this rubber onto the car!

Posted by: Tom_T Apr 1 2010, 12:20 AM

Hmmm .... ..... I didn't think you needed rubber on to polish your knob!!?? ... sounds like overkill to me!!!

Posted by: tat2dphreak Apr 1 2010, 10:12 AM

can't be too careful I suppose...

Posted by: DanT Apr 1 2010, 05:18 PM

Mark, received my package including the new rear targa top hold downs, welting for engine grill, edging for grill, seat release handles...
good looking stuff, now if I just had a car to install it all on
I may be getting back to you for some cowl seals and bottom door bulb seals....

thanks again for providing such good parts for our weird little cars

Posted by: Mikey914 Apr 2 2010, 02:32 AM

Yeah and you should wear the T shirt while polishing your knob.



I think that comment may be more appreciated if you saw the shirt. I bit obnoxious, but does get your attention.

Posted by: Tom_T Apr 2 2010, 01:45 PM

Yeah Mark - I really SHOULD be able to see it after that $800+ order - plus you came by my house empty handed to boot! Remember, I still need more rubbers!!!!

I'm guessing it's fitting a condom over a 914!!??

Posted by: KELTY360 Apr 7 2010, 10:28 AM

Sending PM

Posted by: chrispy May 3 2010, 08:28 AM

hi, my name is chris and i just won your ebay auction for two rubbrr roof holders.
i would also like to purchase, and combine freight, one, of the $24 lower windshield to dash seals.
please email me with payment instructions. pcpoulsen@aol.com. thanks for making this product, chris

Posted by: Tom_T May 3 2010, 04:16 PM

Chris - welcome & 1st tip - don't bother with eBay & 914Rubber for these 914 seals, top holders, etc., since Mark gives us better prices here as 914world members. PM or email him first with what you need & he can tell what he has, what's in the pipeline coming soon & prices, etc. for members.

Good Luck!

Posted by: Mikey914 May 3 2010, 05:12 PM

I actually develop most of my pieces for members here, check my threads for items that are in production. I typically have a good discount for those that step up to support the production, in fact there were a few bumper tops I sold below cost in the beginning, but I had commitments to buy them I honored the price and they got a great deal.

Posted by: paws4862 May 9 2010, 08:55 AM

Posted by: paws4862 May 9 2010, 09:01 AM

Just checking to see if seals have been shipped and if there is a tracking number?
Money sent on April 28th $189.20
thanks Fred

Posted by: paws4862 May 14 2010, 08:19 PM

Hi Mikey
I received the seals yesterday and put them in today ,they fit great no problem installing them they were as good quality as any German seal I had bought for my VW’s
Thanks again Fred

Posted by: Nürburg Nomad May 28 2010, 03:16 PM

Mark, just wanted to mention 914Rubber.com decals are in production.

Posted by: Mike Knox Jun 1 2010, 09:20 PM

Hey Mark!!



Here's a list of the seals I need

Inner door seal #914-531-821-10 $32 NEED LEFT ONLY!
Vertical targa seals (2)kit 914-531-143/4-10 $36 plugged L&R NEEDED
Targa to window seals (2) 914-531-185-10 $38 L&R NEEDED
Outer door to window scrapers 914-531-874-10 $6 a pair NEED LEFT ONLY
Door handle isolators for both handles $5 L&R NEEDED
Late style plastic end caps for the doors Rubber set at $22 L&R NEEDED

So can you send me instructions on how to pay you?

THANKS!!

Mike Knox
Ashland Oregon

Posted by: DanT Jun 14 2010, 04:31 PM

Mark,
PM sent

Posted by: smj Jun 16 2010, 03:59 PM

Just wanted to say "thank you" for making all these parts available, and for (being part of and) responding to the community. I've been meaning to PM and organize an order for months and months, so I just used the web site to get a first order out of the way. Hopefully things will calm down and I can keep track of your latest developments.

If your t-shirt doesn't say something close to "always use a fresh rubber (seal)" ... well, maybe it should.

Posted by: Mike Knox Jun 17 2010, 03:51 PM

Mark, I got all the seals and paraphernalia you sent me, installed. I even pulled out some perfectly good OEM seals and used the extras you sent me. YOUR PRODUCT IS SO MUCH BETTER!!

I hope to meet you face to face someday. Until then please accept my profuse thanks and compliments!!

I would love to have a t-shirt that SMJ suggested.....

Mike Knox

Posted by: Mikey914 Jun 18 2010, 01:33 AM

Come on up for the coast run (short for us) I'll buy lunch. Check out the thread in the garage.

Posted by: charliew Jun 21 2010, 02:09 PM

Mark I got the 911 shifter knob and it is nice, Thanks, I was going to bump the thread but I looked and couldn't find it.
Charlie

Posted by: monkeyboy Oct 29 2010, 10:27 AM

Are you still making the door stay straps?

Posted by: pjhaun Oct 29 2010, 06:53 PM

Mark,
Is it possible to make a rubberized GT rear spoiler (duck tail)?

Thank You!!!!!
Phillip J. Haun
Oak Harbor, WA.

Posted by: Mikey914 Oct 31 2010, 11:07 PM

Yes they are part of my regular inventory, along with the rollers.
Right here -
http://shop.914rubber.com/product.sc?productId=62&categoryId=7

Posted by: Mikey914 Oct 31 2010, 11:10 PM

I't possible to make just about anything, only a matter of cost. I like where you're going with this (kind of like the 944), but I'm afraid there may not be enough interest in these to manufacture.

You can start a thread to see who's interested, I may be wrong.

Thanks,
Mark

Posted by: cary Jan 8 2011, 01:34 AM

Mark here is a picture of the part I'm looking for.
On the 911 I think its called the window channel.


Attached image(s)

Posted by: Mikey914 Mar 8 2011, 12:24 AM

PM sent. Sorry I don't check this too often, been a little busy.

Posted by: jcambo7 Apr 10 2011, 07:31 PM

Hello
Just needing a seal and wondering if you make it. Couldn't find it on your website.
Here is the pic. The seal I need is circled in red.

Posted by: Mikey914 May 17 2011, 03:05 AM

Sorry I don't check in here too often. I do make the part, it's actaully part of the main targa seal. I can sell you a set (left and right) as I make them in pairs if you need just that seal.