Posted by: Pat Garvey Mar 6 2011, 06:06 PM
I've tried spit & it doesn't work!
Pat
Posted by: Bleyseng Mar 7 2011, 04:20 AM
elbow grease!
just push harder and twist.
Posted by: tod914 Mar 7 2011, 08:55 AM
Use gasoline on it. It will slide on much easier. One of the guys suggested that when I was redoing my fuel lines.
Posted by: zymurgist Mar 7 2011, 10:21 AM
I use dish soap if I can't fit it when dry.
Posted by: Pat Garvey Mar 7 2011, 04:41 PM
QUOTE(underthetire @ Mar 7 2011, 10:43 AM)
KY has many uses.
Thanks!
Don't have KY, but have a couple of substitutes to try. Will attempt penetration with a warming lube. Will let you know how it comes out
. Sounds like more fun than elbow grease!
Pat
Posted by: Pat Garvey Mar 8 2011, 04:54 PM
Got 'em on! Astroglide!
Now I need to work on the injectors - 'nother thread. Yes, I know the date is incorrect!
Attached thumbnail(s)
Posted by: 914_teener Mar 12 2011, 05:44 PM
QUOTE(Pat Garvey @ Mar 8 2011, 02:54 PM)
Got 'em on! Astroglide!
Now I need to work on the injectors - 'nother thread. Yes, I know the date is incorrect!
Pat,
Where'd you get the elbows?
Posted by: Pat Garvey Mar 13 2011, 03:46 PM
QUOTE(914_teener @ Mar 12 2011, 05:44 PM)
QUOTE(Pat Garvey @ Mar 8 2011, 02:54 PM)
Got 'em on! Astroglide!
Now I need to work on the injectors - 'nother thread. Yes, I know the date is incorrect!
Pat,
Where'd you get the elbows?
Got them off of eBay. Fellow had 4 used injectors & clips, plus 20 fi clamps, new top & bottom injector seals and new elbows. Didn't really want anything but the elbows, but I got the lot for 24 bucks. Everything after the elbows was gravy.