Printable Version of Topic
Click here to view this topic in its original format
914World.com _ Originality and History _ Front valance differences?
Posted by: sixaddict Dec 23 2013, 05:32 PM
While I know rear valance from 70-71 -4 to -6 differ. However can't see difference in fronts ....can anyone define with accuracy......I.e. Measurements
Thanks
Posted by: Pat Garvey Dec 23 2013, 07:17 PM
QUOTE(sixaddict @ Dec 23 2013, 06:32 PM) 
While I know rear valance from 70-71 -4 to -6 differ. However can't see difference in fronts ....can anyone define with accuracy......I.e. Measurements
Thanks
First, the rear valences were the same for fours through the 72 model year, not 71. They were of the "snowplow" variety. Yes, the fours and sixes had different tailipe openings and position.
The front valences were identical, regardless of model. A six would fit a four with no modifications. The measurements are identical between model.
Posted by: sixaddict Dec 24 2013, 08:51 AM
Thanks Pat
That was my opinion but I continually see posts for 914-6 front valances so was wondering if I was missing something.
TOT
QUOTE(Pat Garvey @ Dec 23 2013, 05:17 PM)
QUOTE(sixaddict @ Dec 23 2013, 06:32 PM)
While I know rear valance from 70-71 -4 to -6 differ. However can't see difference in fronts ....can anyone define with accuracy......I.e. Measurements
Thanks
First, the rear valences were the same for fours through the 72 model year, not 71. They were of the "snowplow" variety. Yes, the fours and sixes had different tailipe openings and position.
The front valences were identical, regardless of model. A six would fit a four with no modifications. The measurements are identical between model.
Posted by: mepstein Dec 24 2013, 12:40 PM
6 parts bring higher prices. 
QUOTE(sixaddict @ Dec 24 2013, 09:51 AM)
Thanks Pat
That was my opinion but I continually see posts for 914-6 front valances so was wondering if I was missing something.
TOT
QUOTE(Pat Garvey @ Dec 23 2013, 05:17 PM)
QUOTE(sixaddict @ Dec 23 2013, 06:32 PM)
While I know rear valance from 70-71 -4 to -6 differ. However can't see difference in fronts ....can anyone define with accuracy......I.e. Measurements
Thanks
First, the rear valences were the same for fours through the 72 model year, not 71. They were of the "snowplow" variety. Yes, the fours and sixes had different tailipe openings and position.
The front valences were identical, regardless of model. A six would fit a four with no modifications. The measurements are identical between model.
Posted by: McMark Dec 25 2013, 10:43 PM
The same aside from the M471 front valences. 
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)