Printable Version of Topic

Click here to view this topic in its original format

914World.com _ Originality and History _ 914-6 Accelerator/Cluch Cable

Posted by: 1845 May 26 2014, 08:15 PM

Can someone send me some pictures of what the clutch and accelerator cables look like as they run from the fire wall back. Looking for correct attachment points and how they were held in place.

Thanks

Posted by: Socalandy May 27 2014, 10:17 PM

Here are several shots as mine went back together...

Attached thumbnail(s)

Attached image(s)

Posted by: Socalandy May 27 2014, 10:19 PM

a few more

Attached thumbnail(s)

Attached image(s)

Posted by: 1845 May 28 2014, 05:02 AM

QUOTE(Socalandy @ May 27 2014, 08:19 PM)

a few more

Thanks, I have the cables in the same basic route but the passengers heat exchanger is melting the outer casing of the clutch cable so I assumed it was in the wrong location.

Posted by: 914Sixer Jul 5 2014, 07:06 PM

There should be straps to hold the cables back and they go into the tabs welded on to the control arm. I just looked in the PET but I did not see them. They were used on the early 911's too.