Printable Version of Topic

Click here to view this topic in its original format

914World.com _ Originality and History _ Central deposit

Posted by: erwindv Oct 23 2016, 10:30 AM

Hey all,

Could somebody post some pics on how the central deposit of a 71 is attached to the dash?

Please, if possible, from different angles and with measures of the latch, holding the deposit.

Thanks a lot in advance,
Erwin
beerchug.gif

Posted by: gcrotvik Oct 24 2016, 10:09 AM

QUOTE(erwindv @ Oct 23 2016, 09:30 AM) *

Hey all,

Could somebody post some pics on how the central deposit of a 71 is attached to the dash?

Please, if possible, from different angles and with measures of the latch, holding the deposit.

Thanks a lot in advance,
Erwin
beerchug.gif


It's not attached to the dash directly. The top bracket is attached to the inner bulkhead with two screws. There should be two plastic inserts that attach to the body through the bulkhead. The picture below is from my 74 as it went to the body/paint shop. It doesn't have the plastic inserts installed but you can see the location. The later 2.0 center console attaches here also.

Greg


Attached image(s)
Attached Image

Posted by: 914_teener Oct 25 2016, 10:56 PM

I have these.

I believe it is original to the car. My build date is 1/73. So early 73. Need to clean the car up....so excuse the dirt. I do drive it a lot.

Hope this is the deposit box you speaking of. If so I'll try and draw it up this weekend.

Rob

Attached Image

Attached Image

Posted by: erwindv Oct 26 2016, 12:59 AM

Indeed, this is the one.

Mine is for the moment in the same condition as yours, needs a clean up.

As in my car, the bracket is missing, I am especially interested on how the bracket looks like and the way it is attached to the inner bulkhead.

Erwin



Posted by: 914_teener Oct 26 2016, 09:52 AM

QUOTE(erwindv @ Oct 25 2016, 11:59 PM) *

Indeed, this is the one.

Mine is for the moment in the same condition as yours, needs a clean up.

As in my car, the bracket is missing, I am especially interested on how the bracket looks like and the way it is attached to the inner bulkhead.

Erwin



Ok...then do you want just the bracket detail?

Do you still want to measure the side peices?

Let me know.

Posted by: erwindv Oct 26 2016, 12:18 PM

QUOTE(914_teener @ Oct 26 2016, 05:52 PM) *

QUOTE(erwindv @ Oct 25 2016, 11:59 PM) *

Indeed, this is the one.

Mine is for the moment in the same condition as yours, needs a clean up.

As in my car, the bracket is missing, I am especially interested on how the bracket looks like and the way it is attached to the inner bulkhead.

Erwin



Ok...then do you want just the bracket detail?

Do you still want to measure the side peices?

Let me know.



Some foto's of the bracket and the way it is attached to the bulkhead are OK.

If possible, can you give the measurements of the bracket so I can reproduce it?


Thanks a lot
Erwin

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)