Is there a difference between the paddding (914 552 031 12) for early (without side vents) and late models (with side vents) as 914Rubber.com makes a difference on their web site: http://shop.914rubber.com/Dash-Top-Reproduction-914DT.htm while the 914_USA_KATALOG only refers to one OEM nr.: 914 552 031 12 for all models?
Yes. Early dash tips are slightly different but 914 rubber's can be modded to work on early.
The addition of the side vents in 1972 reduced the size of the glove box door.
As a result when you put a late dash pad on an early car the door hits the dash pad. if you put a early dash on a late dash there are no issues.
Early dash opening on pad:
Late dash opening on pad:
You can see the reproduction (late) will not line up with the glove box. However, it will not affect the range of motion of the glove box door.
Attached thumbnail(s)
Mark :
Contrary to my experience. Late dash on early car means GB door interferes and will not open all the way.
Am I confused or misunderstand your comment.
TOT
May I see a broader picture of the entire glove box and dash with door shut? The question I would have is the GB recess any different on the drivers side between early and late? As in, is the GB relief in the dash offset to the left visually...
T
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)