Printable Version of Topic

Click here to view this topic in its original format

914World.com _ Originality and History _ factory a/c?

Posted by: peweesboy Jun 13 2021, 11:47 AM

This is a question similar to robkammer's but I didn't care to hijack his thread. I had his questions as well but also I wonder about the effect of the big hole under the trunk of my '73 1.7, vis-a-vis handling and body rigidity. Does anyone know if a sway bar can be added to the front end with the a/c condensor in place? I may just let that sleeping dog lie. Thanks. Rich

Posted by: Bullethead Jun 13 2021, 01:32 PM

The front sway bar is installed above the suspension and steering rack (under the fuel tank) so couldn't interfere. I don't know how much, but some torsional rigidity might be lost, so reinforcing with bar stock in the way it's done for a GT oil cooler couldn't hurt.

Posted by: SirAndy Jun 13 2021, 01:37 PM

QUOTE(peweesboy @ Jun 13 2021, 10:47 AM) *
factory a/c?

There's no such thing as factory AC, they were all dealer installed.
shades.gif

PS: welcome.png

Posted by: peweesboy Jun 14 2021, 07:04 PM

QUOTE(Bullethead @ Jun 13 2021, 02:32 PM) *

The front sway bar is installed above the suspension and steering rack (under the fuel tank) so couldn't interfere. I don't know how much, but some torsional rigidity might be lost, so reinforcing with bar stock in the way it's done for a GT oil cooler couldn't hurt.

Gotcha. Thanks for the tip!

Posted by: peweesboy Jun 14 2021, 07:05 PM

QUOTE(SirAndy @ Jun 13 2021, 02:37 PM) *

QUOTE(peweesboy @ Jun 13 2021, 10:47 AM) *
factory a/c?

There's no such thing as factory AC, they were all dealer installed.
shades.gif

PS: welcome.png

I appreciate the info. Thanks.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)