Printable Version of Topic

Click here to view this topic in its original format

914World.com _ Originality and History _ Oil temp sender

Posted by: rdauenhauer Mar 22 2008, 09:40 PM

For those of you with a car that came with a console
there is a coresponding "taco plate" assemb. at the bottem
of the engine. It is a plate and sender, gasket, then coverplate
with stand to hold the associated green wire with grey sheath.
As the wire is routed over the engine there are at least one (two?)
tabs that pinch and hold that wire until it passes thru the gromet
and connects to the harness.

Does anyone have pics or can explain where the tabs get mounted
Its been so long since I tore it apart that I can remember exactly where they
go.

Posted by: McMark Mar 23 2008, 12:43 PM

IIRC, one tab mounts on the upper oil filter console stud, and one mounts on the bolt that connects the oil cooler to the impeller housing.

Posted by: rdauenhauer Mar 24 2008, 10:00 PM

Thanks Mark. No Pics? Anyone else?

Posted by: orange914 Mar 25 2008, 12:08 AM

QUOTE(rdauenhauer @ Mar 24 2008, 09:00 PM)

Thanks Mark. No Pics? Anyone else?

this will be good to know...