Printable Version of Topic

Posted by: rdauenhauer Apr 25 2008, 10:39 PM

Ok on certain yr models at the front edge of the lid is rubber bump stop thingy.
its L shaped with a steel bracket that is captured under one of two spots on the tray.
What's it for?
Were ther just one or are two susposed to exist?

Posted by: McMark Apr 25 2008, 10:46 PM

It keeps the rear trunk lid from hitting the engine lid when both are open. It's only on early years.

Rubber piece is 914.512.195.10
Metal reinforcement is 914.512.326.10

PET lists them as through 73.

Posted by: SirAndy Apr 26 2008, 12:43 AM

it also prevents the engine lid from just flying open when you pull the lever. without that stop, you have to put your hand on the lid while opening to prevent it from potentially hitting the trim. with the stop, the lid only opens a few inches ...

Andy

PS: just one, not two ...

Posted by: rdauenhauer Apr 26 2008, 01:25 PM

Ok Great. mounted on the drvs or Pass. side?
Sure its only up to 73? I seem to encountered these on 74 cars
as well (LE ) though I cant honsetly recall if Ive seen any on 75-76
cars?
Would it be specific to the tray used since very early trays were diff from mid
but not sure if Late were diff again?

Posted by: Pat Garvey Apr 27 2008, 07:35 PM

Drivers' side only.

Doesn't matter what type of rain tray.

BTW, the one on my 72 has never kept the engine lid from opening full blast - only my right hand . In essence, an original, though useless part.
Pat

Posted by: McMark Apr 30 2008, 01:02 AM

Andy, that's the story that Brad presented to me as well, but there is no clip or catch that would stop it from opening.

Posted by: SirAndy May 3 2008, 12:44 PM

it doesn't have to. when installed right, it slides along the edge of the rear hood, slowing down the lid enough so it doesn't bang all the way up ...
Andy

Posted by: Thomas J Bliznik May 3 2008, 02:19 PM

I agree most 74's had them except late in the year they were eliminated.
Here's a photo from my mid year 74 what they look like.

Tom


Attached thumbnail(s)

Posted by: McMark May 3 2008, 03:47 PM

I'll have to see it to believe it.

Posted by: sendjonathanmail May 3 2008, 08:47 PM

Interesting. I've never seen one of these before. My '74 (built 3/74) doesn't have one. Where would it mount exactly, maybe a pic? Would their be an additional hole of some sort? I don't see any place where it could mount.

Posted by: Jeff Bowlsby May 4 2008, 12:16 AM

I have seen a few LEs Rich...never one with this rubber thingy....are you sure it was original to the LEs?

Posted by: Pat Garvey May 4 2008, 08:20 PM

Here's a pic of my original ('72) & where it's mounted (yeah, I know - the engine's a mess - lotsa things being redone). Of course, and naturally, the early version is not the same as Tom's - F & R surfaces are flush. Jeez, is there ANY continuity to the parts on these cars?

Pat


Attached image(s)

Posted by: rdauenhauer May 5 2008, 12:03 AM

No I wasnt sure Jeff, Ive gone thru a few cars mostly 73 & 74's and recall seeing them on both, the LE burned so long ago I couldnt remeber.
Just chking the colective wisdom.
My car will have a few deviations from stock, if they make functional sense.
SS HE's, the late dual blower outlet ect.
If that little do-hicky was gonnas save some lid smackage Id install it.

Posted by: Slider May 30 2008, 11:54 PM

Then my 72 has one to many..ive got them on both sides.
thats the way it came to me..