Printable Version of Topic
Click here to view this topic in its original format
914World.com _ Originality and History _ Stablizer Bar Hardware
Posted by: 914Sixer Jun 5 2008, 10:43 PM
I am stripping a 74 with front and rear stab bars. Front drop links, gromet holder, and levers are yellow zinc. Bar is painted black except on the ends.
Rear bar gromet holders are yellow zinc. Bar is black. Drop links appear to be black also.
Is this what everybody else has?
Posted by: rdauenhauer Jun 6 2008, 06:24 PM
that is correct and orig. as on my 74 LE
Posted by: Johny Blackstain Jun 13 2008, 01:10 PM
Same as on my LE as well. Front all yellow zinc & the back black, except for the bushing brackets. Remember to measure & center that front bar when putting the links back on. I lubed both bushings & the bar w/ teflon, then used a hammer & a foot long 2"x4" on the sway bar ends. Worked very well & easy.
Posted by: Steve Snyder Jun 22 2008, 11:36 AM
Mark,
Those are the finishes on my (non-LE) '74, '73 & '76 bars and hardware. Apparently there is consistency (for once).
Posted by: 914runnow Jun 24 2008, 06:22 PM
I am stripping a 74 with front and rear stab bars. Front drop links, gromet holder, and levers are yellow zinc. Bar is painted black except on the ends.
Rear bar gromet holders are yellow zinc. Bar is black. Drop links appear to be black also.
Is this what everybody else has?
Yepperz same here...Although mine are still in bags from Mother Porsche
from 10 or so years ago......
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)