Anyone have pics or drawings off a 914/6 Weber/Solex linkage set up? I'm missing the cross bar and drop links and need to see what I need to source. I also need to see what the stock fuel line set up is on top of the engine shroud.
Mike the fuel line snaps into 2 plastic retainers along the rear bulkhead, just above the tin.
Here is a pic of the correct fuel line(not 911) and the throttle linkage.
http://www.914world.com/bbs2/index.php?s=&showtopic=78492&view=findpost&p=1053222
Those are Zeniths! Yikes!
I'll try and get some pics of my 6 tonight or tomorrow and post them.
Yes...Zeniths. The PO of this car was a little less than completely honest on the amount of parts available. So now I have to source a linkage.
Got any laying around?
Fuel line set up in a 6. Single line from the engine shelf to the filter.
Another shot of the line to the filter, and from the filter to the fuel rail.
The fuel rail is fastened to the rear bulkhead with three white plastic clips.
Third fuel rail clip and to the left carb.
Another shot of the fuel line to the left carb.
Sorry Mikey, no spare carb linkage
I'm pretty sure you can use any 911 carb linkage. The only thing specific to the 914-6 is the pull rod from the pin on the trans to the linkage on the right side.
Thanks....
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)