Printable Version of Topic

Posted by: Randal Nov 9 2010, 12:36 PM

I'm about ready to install aluminum plates and set up the fasteners for the hood and trunk of 222.

Which ones have you used and which ones do you like the best?

Posted by: stownsen914 Nov 13 2010, 05:06 AM

I got my aluminum hood pin kit at Summit Racing.

Scott

Posted by: J P Stein Nov 13 2010, 07:19 AM

I used Dzus front & pins rear.....both from Sumitt. the available support structure or lack there of made my decision. For the Dzus, the 4 corners of the trunk opemiing msde good places for sheet metal ( plus the front center) for mounting the spring clips. I needed extra support under the rear spoiler anyhow, so pins worked out best there.

Got some pics iff'n ya want em'.

Posted by: campbellcj Nov 14 2010, 02:19 PM

I used GT-style pins up front and the rubber "T" latches in back. I still have hinges but no springs, and superlight f/g lids.

Posted by: Racer Chris Nov 16 2010, 08:49 AM

http://www.coastfab.com/aerocatch.html

Posted by: 70_914 Nov 18 2010, 12:44 AM

QUOTE(Racer Chris @ Nov 16 2010, 06:49 AM)