Printable Version of Topic

Click here to view this topic in its original format

914World.com _ The Paddock _ Window Net

Posted by: wndsrfr Aug 9 2012, 08:23 PM

Anyone installed a window net? I just stripped out the glass and regulators etc. and am now considering putting on a net. If so, how did you anchor it?

Posted by: Bullethead Aug 9 2012, 09:24 PM

Depending on the net kit either weld holed tabs (spring rod type) or if using a latch receiver (seatbelt type) those come with the parts needed to weld to the cage.

http://www.speedwaymotors.com/Latch-Style-Window-Net-Install-Kit-24-Inches,3465.html

Hope that helps.

Posted by: brumi Aug 12 2012, 07:20 PM

QUOTE(wndsrfr @ Aug 9 2012, 06:23 PM)

Anyone installed a window net? I just stripped out the glass and regulators etc. and am now considering putting on a net. If so, how did you anchor it?

Anchoring the bottom of the net is the real problem
Until IO Port recently came out with a net with adjustable straps on the bottom that can wrap around a NASCAR style door bar ( roll cage door bar ) or any type door bar ( bolt in etc.)
It is currently not allowed ( SCCA ) to anchor bottom of net on the door itself. Must be anchored to cage