Printable Version of Topic

Click here to view this topic in its original format

914World.com _ The Paddock _ Anyone using Hoosier A6 205/45/16 size?

Posted by: mskala Sep 19 2013, 07:59 PM

Yes, I know this info is listed on tire rack, but have my doubts
sometimes about who's collecting the data.

If you are using A6 size 205/45/16 can you measure the section width
and also tell me your wheel width?

Have Kumho V710 215/40/16 and they are 8.5" wide on 7.5"
rim and I have probably no more room, just may be interested
in alternative tire.

Thanks

Posted by: r_towle Sep 21 2013, 11:16 PM

Put your hand inside the fender, pull from the middle of the opening.
Watch the door gap.

If you have folded over the lip, you may be surprised what you can make that fender do....there is quite a bit of room to trench the fender.

Posted by: mskala Sep 22 2013, 03:06 PM

It's been moved a lot already. Based on seeing some other fenders
this is about as far as it should go and still be able to look like it is
supposed to be there.

I don't think I want any more tire fatness anyway, it is hard enough
to get them hot