Printable Version of Topic

Posted by: jmz Dec 31 2017, 11:45 AM

wifey gave me AIM SOLO for the holidays and looking to install it on the race car and looking for ideas.

Anyone have any photos they can share?

Posted by: Cracker Dec 31 2017, 01:14 PM

Front and center...

Cracker

Posted by: Specracer Dec 31 2017, 04:41 PM

Suction cup / arm to the windshield. making sure not to block drivers right apexes, or at least up on dash in field of view. I personally like it higher than on the center of the wheel

https://www.pegasusautoracing.com/productdetails.asp?RecID=9542

Posted by: jmz Dec 31 2017, 04:42 PM

Thanks Cracker. That's not a bad idea at all.

Posted by: Matt Romanowski Feb 1 2018, 03:44 PM

If you have a cage, go with the v bar mount. Then you can mount it to the A pillar and have it lower left. Great spot. If you need help with it, let me know, I'm an AiM dealer. Matt@trailbrake.net.

Posted by: naro914 Feb 1 2018, 04:25 PM

I took out the speedo, made a plate to cover the hole, and mounted mine right there.

Posted by: Specracer Feb 1 2018, 05:27 PM

Street car application, I have a suction cup mount to the windshield. Keeps it up high in a clear view.

Posted by: jmz Feb 2 2018, 12:27 PM

Thanks Matt. I just did this very thing after considering fabricating a bracket. ...went to the Aim site a few days ago and then purchased from Winding Road Racing. Thanks for the offer. I think a good call...

I only wish I waited to buy the solo rather than having "Santa" drop one off since they just came out with the new model.