Need a couple of plates only
Who do we know that will sell plates only?
Summit seems to have them
https://www.summitracing.com/parts/aaf-all18517
Noticed this thread on the topic in case you haven't seen it
http://www.914world.com/bbs2/index.php?showtopic=337828
jmz, I do like the beveled plates also but just always wondered that the revetted down edges would be hard on the paint. Mark
Are the beveled edges ostensibly to put a "spring pressure" on the pin?
Late to the party and maybe not much help but I also made my own pin plates. When I looked what can be purchased ready made nothing met my standards for function. I also needed mine to be strong - as in very strong. I used .125" stainless plate (440); beveled the edges; and used .250" stainless rivets. I extended the top two plates (corners) over the hoods edge so I could use them as stands (thus the double rivets, as well) when the hood was off - works great.
Good luck.
Cracker
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)