Posted by: jmz Jul 27 2021, 04:57 PM
Who’s fits best?
Anyone have an opinion?
Posted by: mepstein Jul 27 2021, 05:31 PM
@http://www.914world.com/bbs2/index.php?showuser=9478
Posted by: RiqueMar Jul 29 2021, 09:34 AM
QUOTE(mepstein @ Jul 27 2021, 04:31 PM)
@http://www.914world.com/bbs2/index.php?showuser=9478
@http://www.914world.com/bbs2/index.php?showuser=10825 - Thanks for the tag!
@http://www.914world.com/bbs2/index.php?showuser=19886 - Created a new valance and pulled a mold, front and rear, after a bad experience with my car. If you're not in a huge hurry, I should have the first units out shortly.
Posted by: Justinp71 Jul 29 2021, 02:28 PM
QUOTE(RiqueMar @ Jul 29 2021, 08:34 AM)
QUOTE(mepstein @ Jul 27 2021, 04:31 PM)
@http://www.914world.com/bbs2/index.php?showuser=9478
@http://www.914world.com/bbs2/index.php?showuser=10825 - Thanks for the tag!
@http://www.914world.com/bbs2/index.php?showuser=19886 - Created a new valance and pulled a mold, front and rear, after a bad experience with my car. If you're not in a huge hurry, I should have the first units out shortly.
I'd be interested for the rear... dual rear outlets?
Posted by: RiqueMar Aug 2 2021, 10:19 PM
QUOTE(Justinp71 @ Jul 29 2021, 01:28 PM)
I'd be interested for the rear... dual rear outlets?
Hey
@http://www.914world.com/bbs2/index.php?showuser=2922 - I don't want to take over this thread, so check out my build-thread and PM me if you like.
Posted by: jhynesrockmtn Aug 23 2021, 07:24 AM
QUOTE(RiqueMar @ Jul 29 2021, 08:34 AM)
QUOTE(mepstein @ Jul 27 2021, 04:31 PM)
@http://www.914world.com/bbs2/index.php?showuser=9478
@http://www.914world.com/bbs2/index.php?showuser=10825 - Thanks for the tag!
@http://www.914world.com/bbs2/index.php?showuser=19886 - Created a new valance and pulled a mold, front and rear, after a bad experience with my car. If you're not in a huge hurry, I should have the first units out shortly.
I would also be interested. I have nothing on the rear and my front hangs too low and has been damaged previously as a result. I'm trimming it in the short term before my first event but would eventually like to replace.
Posted by: mb911 Dec 9 2021, 06:26 AM
I have had a hard time finding on in stock. I wanted Marty's but there source dried up. I am not sure what are options really are.
Posted by: Justinp71 Dec 16 2021, 06:09 PM
QUOTE(RiqueMar @ Aug 2 2021, 08:19 PM)
QUOTE(Justinp71 @ Jul 29 2021, 01:28 PM)
I'd be interested for the rear... dual rear outlets?
Hey
@http://www.914world.com/bbs2/index.php?showuser=2922 - I don't want to take over this thread, so check out my build-thread and PM me if you like.
@http://www.914world.com/bbs2/index.php?showuser=9478 thats quite the build thread, what page should I look for a rear valence on?
Posted by: mlindner Dec 18 2021, 09:06 AM
I purchased a GT valence from Ben last year. His wife ran over it the day he was to ship. I purchased anyway because my GT flares were installed 30 years ago by a friend that built stock cars and the chances of it fitting was nil. I test fitted and to my surprise it fit perfect. So I glassed up the repair and installed for this summer test drives. I just took the bumper and valence off for a 914-6 GT paint job, half black, half Yellow. The name on the back is QRS. Very nice product. Mark
Posted by: RiqueMar Dec 22 2021, 01:38 PM
QUOTE(Justinp71 @ Dec 16 2021, 04:09 PM)
QUOTE(RiqueMar @ Aug 2 2021, 08:19 PM)
QUOTE(Justinp71 @ Jul 29 2021, 01:28 PM)
I'd be interested for the rear... dual rear outlets?
Hey
@http://www.914world.com/bbs2/index.php?showuser=2922 - I don't want to take over this thread, so check out my build-thread and PM me if you like.
@http://www.914world.com/bbs2/index.php?showuser=9478 thats quite the build thread, what page should I look for a rear valence on?
@http://www.914world.com/bbs2/index.php?showuser=2922
Posted by: mepstein Dec 22 2021, 03:31 PM
QUOTE(mlindner @ Dec 18 2021, 10:06 AM)
I purchased a GT valence from Ben last year. His wife ran over it the day he was to ship. I purchased anyway because my GT flares were installed 30 years ago by a friend that built stock cars and the chances of it fitting was nil. I test fitted and to my surprise it fit perfect. So I glassed up the repair and installed for this summer test drives. I just took the bumper and valence off for a 914-6 GT paint job, half black, half Yellow. The name on the back is QRS. Very nice product. Mark
I had a QRS valance. I wonder if I sent it to Ben?
Enrique - Are you still planning on making them?
Posted by: RiqueMar Dec 22 2021, 07:55 PM
QUOTE(mepstein @ Dec 22 2021, 01:31 PM)
Enrique - Are you still planning on making them?
@http://www.914world.com/bbs2/index.php?showuser=10825 - Yep! The photo I posted is the first-unit.Taking me a little longer than I expected, but I hope to have the Side-skirts and Front-valance this Feb.
Posted by: Justinp71 Aug 10 2022, 06:16 PM
Does anyone know where to get a long rear valence for a flared car? I found this one but with shipping it will be about $500-
https://www.f-s-h.com/Rear-valance-for-914-GT-long-version
Posted by: mlindner Aug 28 2022, 08:14 AM
my final fit and finish. Mark
Posted by: mb911 Oct 8 2022, 09:16 AM
QUOTE(mepstein @ Dec 22 2021, 01:31 PM)
QUOTE(mlindner @ Dec 18 2021, 10:06 AM)
I purchased a GT valence from Ben last year. His wife ran over it the day he was to ship. I purchased anyway because my GT flares were installed 30 years ago by a friend that built stock cars and the chances of it fitting was nil. I test fitted and to my surprise it fit perfect. So I glassed up the repair and installed for this summer test drives. I just took the bumper and valence off for a 914-6 GT paint job, half black, half Yellow. The name on the back is QRS. Very nice product. Mark
I had a QRS valance. I wonder if I sent it to Ben?
Enrique - Are you still planning on making them?
No not this one. I got it with my car when I purchased it.
That said guys I do have weld on rear valance steel flares if any one needs a set.