I just bought an original 914/6 that came with 14" Fuchs. Those that are running 14" rims, what type of tires are you using for Driver's Ed. Are the Falken Azenis RT-615 good for this purpose?
Hi Mike,
Hope life's been treating you well :wave: You have to put up some pictures of your new /6. The 2.2E we bought from you is still sitting unused . . . we're just way too busy to rebuild it.
On subject, there really isn't a great selection of tires in the 14in sizes. As Van said you probably are better getting some 15in track wheels. Unless you are going to slicks the Falkens might be the best tire in that diameter.
Jim
205/55/zr14 hoosier race . tread pattern is M . it is a dot tire that can be run on the street . pricy . and sticky . i am running them
anyone know of any other tires ?
Attached image(s)
no flares . 5.5x14 . stock five lug fuches . 3.2 dme . limited slip . patrick motorsports everything .
Attached image(s)
All those brits run <15 inch wheels and tires so it can't be too bad, even some fast miatas I think. Those rims are sweet, I wish I had the 5 lug hubs sometimes.
So smokey - are you going to drive on hwy 9 with those tires?
YOKAHAMA AO48 205/55r15 tread were 90 very fun on H 9 . they are now on 15x5.5 fuchs . the slicks are for time trial / auto X .
Attached image(s)
If you are new to AX, run your present tires till you chord them......... great to learn on. Then, if you like to drive on an R rated tire at ALL times and not bother with another set of wheels, then get Toyo RA-1's. If you want a dedicated AX tire, and you have reached the limits of the car and the RA-1's, buy Kumho V710's or pricier Hoosier A6's. The hoosiers will probably give you about 7 AX events for about $1000.00, can you handle that?............. not me!!
theres a clearance right now on kumho ecsta v700s on tire rack..they come in 14 sizes..check them out
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)