Barrel Connector for the Accelerator Cable-Original Style with Slot screw
PET 702-00 Pos. 18 & 19
Qty. 1
This is the one with flats on the side for a wrench to hold the barrel while you're tightening/loosing the screw. Barrel is yellow plated and screw is clear zinc plated.
If you want to match the PET exactly, you can remove the screw and replace it with a Hex head bolt M5x10.
The new style barrel connector that many use is completely round and comes with either a slot screw or hex head bolt. The round style makes it very difficult to hold with tightening or loosing the screw/bolt.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)