Printable Version of Topic
Click here to view this topic in its original format
914World.com _ Past Event Planning Threads _ air flap ?
Posted by: tat2dphreak Oct 17 2009, 08:37 PM
Air Flap 914 559 163 10 1
is that the coling flaps in the fan shroud?
if so I will send her the one I just took out. I'll bead blast it and paint it first tho.
one more thing. I found out the heater hoses there are some cheap substitutions.... the rear heater hose off a 911 is about $20 and can do all of the front heater hoses in one length.
mikey914 also makes the ones that go from the blower to the j-tubes... hope that helps
Posted by: RobW Oct 18 2009, 05:45 PM
Air Flap 914 559 163 10 1
is that the coling flaps in the fan shroud?
if so I will send her the one I just took out. I'll bead blast it and paint it first tho.
one more thing. I found out the heater hoses there are some cheap substitutions.... the rear heater hose off a 911 is about $20 and can do all of the front heater hoses in one length.
mikey914 also makes the ones that go from the blower to the j-tubes... hope that helps
I have an extra fan shroud off a 2.0 laying around if that helps...
Posted by: ejm Oct 18 2009, 06:49 PM
I took a look at PET this am and couldn't find this part. Just took another stab at it and realized the part # can't exist. Without the "1" at the end the format is correct but that # is not in the factory price book. The p/n starts with 914 so it is specific to the car. Most if not all of the engine stuff would be 021/022 since it was sourced from VW. I could be wrong
A pic of the part would be good 
Posted by: Kansas 914 Oct 20 2009, 10:10 PM
Guys,
That part number came from Carrie Sweet - not sure what she meant - but let's wait until the engine builder (and Ed) tells us what is needed - Carrie may have made some assumptions from the 30 foot view - without tearing into the engine.
Does that makes sense?
Posted by: ejm Oct 21 2009, 12:56 PM
Got it. This is the plastic air deflector that's under the car at the rear edge of the floor pan. The part # is correct, the "1" must be quantity as there are two of them. This part is long NLA and is no longer listed in my price book.
Posted by: RobW Oct 21 2009, 02:56 PM
Pretty sure I have a spare off 504 as I remember the bolt being small. Is it one side fits all?
Posted by: tat2dphreak Oct 21 2009, 03:28 PM
I don't even know that part... it's probably not on my car 
Posted by: ejm Oct 21 2009, 03:33 PM
I don't even know that part... it's probably not on my car
that's right.... factory installed on '73 and up... you will get better engine cooling with them
Rob...same part both sides
Posted by: RobW Oct 24 2009, 09:04 PM
Got 2 of them. Cleaned up OK after this pict... right parts right?
Attached thumbnail(s)
Posted by: ejm Oct 25 2009, 05:42 PM
yep
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)