Printable Version of Topic

Click here to view this topic in its original format

914World.com _ Past Event Planning Threads _ Conference call Thursday 11-19-09 Please attend if you can

Posted by: rick 918-S Nov 18 2009, 12:12 AM

We have a slight bump in the road. We need to rethink things a bit. Call in if you can. This is an important meeting.


Please Call Dial-in Number: 1 (218) 486-1600
The Participant Access Code is: 124424#

9PM Eastern
8PM Central
6PM Pacific

Posted by: tat2dphreak Nov 18 2009, 09:17 AM

do we need to move the meeting up? sounds important.

Posted by: rick 918-S Nov 18 2009, 10:14 AM

I think were ok for thursday but call me if you want details before then. Infact, yes, ring me up when you have a couple minutes. Our conversation with help in pre planning ideas for the next step.

Posted by: tat2dphreak Nov 19 2009, 08:24 PM

I don't know if it was my phone or ??? but I got cut off and can't rejoin. lmk what happens.

Posted by: rick 918-S Nov 19 2009, 09:44 PM

QUOTE(tat2dphreak @ Nov 19 2009, 06:24 PM) *

I don't know if it was my phone or ??? but I got cut off and can't rejoin. lmk what happens.



Ya, We all got bumped. I tried to call back in. I it took a couple times. Here's what you missed.

Mike may have Mary over tomorrow.

We decided we would let her know we want to send is a recon team on January 30th. Our goal would be to set up the car up at Lukes, get folding tables set the parts up in sub assembles.

Once we have the parts set out we want to go through them and take inventory for only what is missing.

Then we will want to go through the parts that are there and pull out what is not usable.

Then we will want pull parts that need to be cleaned or blasted. Some of the parts we can clean on site, some will need to be sent out to the members of the build team to be repaired or cleaned and painted before the February Build Off.

This should make this a successful event and allow us the chance to finish the build on one 914 weekend.

Mike will run this by Mary Tomorrow. I think we can make this happen.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)