Working on it.
Here is a single color design.
Let me know what you think.
With white ink looks best on dark colors but will work on any color shirt except white.
And here is a 2nd design with 2 colors that will work on white, ash, and other light to medium colors but not black, navy, etc. Cost will be approx. $1.00 more than a single color design.
Oops, the date is wrong on this one. Will be corrected.
Which do you like better?
Both look good, Steven....
I like the whole car for a back...could the silohette/logo be shrunk for the front pocket. Probably to much going on tho?
Thanks for what your doing, man....
I like the silouette version but both are excellent. But this is the MUSR 11 isn't it?
Thanks for the input so far. I am leaning towards the first design with silhouette.
Ron - this is MUSR #12.
I did a bit of research earlier and there was a MUSR a few years back that was held along with some other event and that MUSR had no number. So, technically, this one should be #13.
I'm thinking they did one at the same time as Porsche Palooza one year?
Here is what I found:
1999 - MUSR1 - Hot Springs AR
2000 - MUSR2 - Fairfield Bay AR
2001 - MUSR3 - Dallas TX
2002 - MUSR4 - SE Oklahoma
2003 - MUSR5 - Hot Springs AR
2004 - MUSR6 - Ft. Gibson Lake, Wagoner OK
2005 - MUSR7 - Granbury TX
2006 - MUSR8 - Ft. Smith AR
2007 - MUSR9 - Austin TX
2008 - MUSR - Huntsville AL in conjunction with Rocket City Ramble
2009 - MUSR10 - Hot Springs AR
2010 - MUSR11 - The Dragon, east TN
2011 - MUSR12 - Eureka Springs AR
OK, how about an ash shirt with dark blue ink? Or we could go with a light blue shirt (or boring ol' white). Or maybe offer a choice of the three colors?
If we can afford a front pocket print, then basically can use the back design shrunk down. I know you all liked both designs but not good to use both on same shirt. Best to keep same/similar designs front/back. The silhouette was an idea I had for another 914 shirt so it will be used at some point
Shoe - see if your printer can add a front pocket print to the same screen (to avoid a second screen charge) Since his screens are 14x19 and the back is only about 14x14, that leaves plenty of room at the bottom for the front logo. To print, would rotate the screen around and tape off the area not to be printed.
thanks,
steve
I like it......
Steve - AWSOME!!
I vote for the blue on ash combination.
BTW - see my thread on "Flyers" regarding use of the MUSR12 logo for some printed flyers.
I like them all.
In particular, I prefer this one:
It seems the selection may already have been made, and since Steve always does fantastic work, it will be great no matter what.
Dan,
Thanks for the input. Yeah, going with the other design for this event.
The silhouette one is a design I came up with for a "generic" 914 shirt so stay tuned
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)