Lets start a list of products and parent companies that provide us our 914 needs
after we lock down the hotel we'll start a list of local vendors that we can approach to help us with specific events at the Ramble
please copy and add to the Donor list
Business-----------------------------contact---------------------------------# or address
pelican
AA
kragen
pep boys
napa
restoration design
optima
Yokohama
falken
pirelli
Goodyear
Hoosier
brad Penn
auto-motion
LOOS motor sports---------------------Jonathan---------------------------805-550-8105
Applied Business Concepts-----------Bob Breshears-------------------(310) 539-6183
NAPCO-----------------Bruce Napier-------------------------------
Callicott Motorsports?------------------Dan Callicott---------------
PMB Performance--------------------Eric Shea-----------------------------
914rubber
CAMP 914--------------------------Craig laughlin................................
please keep adding to the list
One final thing please list as much contact info as you can for each vendor you list
I will be hard pressed to get this info from 100 different vendors
I'd include EBS (Engine Builder's Supply) and Aase Motors.
any body else?
come on and help put together this list so we can begin to get contact info
I'm aiming to get contact letters out by the end of october, but I need feed back
I handed a flyer to Bob Breshears of Applied Business Concepts (Appbiz) while out at GAF ... Bob manufactures a lot of interior items for 911's and 912's and more recently - 914's (carpet kits, door panels, targa headliners, etc.
Bob and I spoke this morning, and he said he would be happy to donate a carpet kit and a pair of upholstered door panels for the prize/raffle
He goes by http://myworld.ebay.com/ebaymotors/appbiz/?_trksid=p3911.c0.m198 on eBay if you want to see some more of their products.
Bob's business also supplies some of the 'Weltmeister' branded products that Automotion marketed (which was bought out by Performance Products a few years ago, which was just recently bought out by another company).
Appbiz is located in Harbor City, CA - Phone: (310) 539-6183
Bob also provided me with contact info for Dave at TRE Motorsports (818) 509-0257
Attached image(s)
From and PM
Joe, wanted to talk to someone about being a sponsor for the west coast ramble. When is it and what are you guys looking for? Can you email me at hwgunner@msn.com.
jonathan
hwgunner
LOOSMotorsports
805-550-8105
I can try and call precision motion in riverside
Bruce Napier (GWN7) said he will be supporting the event with some goodies too ...
I can talk to Dan Callicott and see if he can and if he's interested, I talk to him at least once a month.
What about Eric Shea? what about Bruce Stone? The guy from Hemet who does the fiberglass decklid's etc. (I'll think of his name)I can check with these guys.
Thanks for joining us Lou. BD is already on board with us and I am sure Eric will join us also.
Unless someone else takes the reigns , I guess I'm going to be in charge of donations
so as of right now I'm just looking for all of us to make a list of possible "donors"
if you have a solid contact name and business address that will make that part a little easier
We, as a committee ,still need to figure out our estimated cost so we can make some kind of plan or donor level of benefits. IE how to be on licence plates, shirts, handouts etc.
I'm going to add the names to my first post , please add to the list by Replying to the last list in this thread
George: Please do.
The Plates will be about 2k and the shirts I had made up were $1400 for 144 shirts, actulay Robert got them for $9.14 each.
We can sell space on the plate to help cover the cost and we will have a seilent auction to get a little more.
I will donate a nice GT Engine lid for the auction.
Business-----------------------------contact---------------------------------# or address
Club Narp--------------------------Joe Sharp Logistics---------------------------
pelican
AA
kragen
pep boys
napa
restoration design
optima
Yokohama
falken
pirelli
Goodyear
Hoosier
brad Penn
auto-motion
LOOS motor sports---------------------Jonathan---------------------------805-550-8105
Applied Business Concepts-----------Bob Breshears-------------------(310) 539-6183
NAPCO-----------------Bruce Napier-------------------------------
Callicott Motorsports?------------------Dan Callicott---------------
PMB Performance--------------------Eric Shea-----------------------------
914rubber
CAMP 914--------------------------Craig laughlin................................
please keep adding to the list
One final thing please list as much contact info as you can for each vendor you list
I will be hard pressed to get this info from 100 different vendors
Ringing
Eric is good for:
(1) Full caliper set (TBD as the fronts are specific to 70-72.8 and 72.8-76) Value = $516.60
(2) Speed Bleeder Sets. Value = $28.00
(1) Full set, front and rear, pad set. Value = $66.00
Total Value $610.60
Thanks Eric if everybody is like you my "job" will be easy lol
I'll send you shipping info in a few months.
I attached the 'Vendor' spreadsheet (Excel) in this post
... added some additional prospects (in red type) and contact info (wherever possible)
Let me know if this works for you guys :confused.
Let me know if/when the sheet gets updated with new info (by any of you boys & girls), PM it to me, and I will repost the updated sheet right here (post # 17) to save space on the server
Attached File(s)
2009_WCR_Vendor_Donations_3_7_09.xls ( 25k )
Number of downloads: 13
James and Hidi @ morphensprecta
Added Mark Engman to the list and sent him an 'introductory' e-mail through his web site tonight ...
(see updated list in post # 17)
I talked to Kathy Calicott, because of Dan's health, he has closed Calicott Motorsports.
Jeff Schmidt contact info:
QRS Quarterscale Racing Specialties
26509 Cornell St.
Hemet, CA 92544
1-909-260-7303
Updated list 1/28/09 ... (see Post # 17)
Reflecting Lou's input above ...
Updated list again 3/7/09 ... (see Post # 17)
rhodyguy (Kevin Powers) is donating a Brad-Penn oil change kit, consisting of 5 quarts of 20/50 oil, Mahle/Mann filter for a 4 cyl and a sump screen
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)