Printable Version of Topic

Posted by: stugray Mar 21 2018, 03:42 PM

I ordered the front monoballs from Elephant racing and they dont fit quite right.

I cant tighten the nut down far enough to get the cir-clip on.

SO I tried another camber plate I had in my parts stash and they FIT!

Called Elephant and they said that the 911 camber plates are just a couple millimeters shorter so the monoballs fit.

Does anyone have a stock 911 camber plate?
You cannot visually tell the difference without measuring.

If you are not sure, I can get the measurement, but would probably need to provide a picture.