Printable Version of Topic

Posted by: 914World Jun 13 2012, 09:29 AM

This is a 15,000 motor that is fully built for a sanrail, project car etc. I blew the motor when it was in my sand rail. I've since sold my sanrail and now I have no use for this motor. I am looking for Barter so show me what you have.....

Some Spec's STI Block 2.5 Darton Sleeves, O ringed heads, ARP head studs, JE Pistons, H beam race Rods, Turbonetics E50 Ball bearing Turbo T3/T44, Tial wastegate, cermaic coated exhaust polished BOV, Billet fuel rails, 83lb Bosch Injectors, upgraded Cams with all upgraded retaining parts, aluminum pulleys, carbon front cover, new pulleys, new belts, chromed heads, billet filler neck, polished intake, polished water cross over, polished alternator, custom oil pan, custom breather system, flywheel and clutch, all steel braided lines included.

I've seen these motors in Volkswagens and Porsche 914's

What you would need is a bottom end rebuild or a short block, computer and intercooler

This is the shop that the motor is at and all the parts listed above is on the web site.
http://www.outfrontmotorsports.com/400hp_setup.htm



http://s260.photobucket.com/albums/ii26/ragekills/Offroad/?action=view¤t=DSC01268.jpg

http://s260.photobucket.com/albums/ii26/ragekills/Offroad/?action=view¤t=DSC01270.jpg

Video of running motor
http://s260.photobucket.com/albums/ii26/ragekills/?action=view¤t=SU.mp4

• Location: Buena Park
• it's NOT ok to contact this poster with services or other commercial interests