Rear Bumpertops Finally! After alot of trial and error, Prepurchse closed |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Rear Bumpertops Finally! After alot of trial and error, Prepurchse closed |
Mikey914 |
Sep 27 2009, 11:59 PM
Post
#1
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
For those of you that hjave been following the production of the rear tops, I have finally got all the bugs worked out. I kept having the interal stainless structure blow into the top edge at the licence plate wells. I'm having to play with the water jet cutter to make the shape I need to make this work correctly. These do have the suport running from the edge mounts through the center mount so the section will not droop where the licence plate goes.
After the run is started these will go to $286 Who needs one? Don't need money now, just a list of those that will be needing them, I'll forward out the payment specifics later. Attached thumbnail(s) |
Mikey914 |
Sep 28 2009, 12:01 AM
Post
#2
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Another
Attached thumbnail(s) |
Mikey914 |
Sep 28 2009, 12:02 AM
Post
#3
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
and another
Attached thumbnail(s) |
Mikey914 |
Sep 28 2009, 12:06 AM
Post
#4
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
one more
Attached thumbnail(s) |
Mikey914 |
Sep 28 2009, 12:10 AM
Post
#5
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
One more with detail on texture
Attached thumbnail(s) |
montoya 73 2.0 |
Sep 28 2009, 12:18 AM
Post
#6
|
Lack of consideration to others, and Selfish! Group: Members Posts: 1,791 Joined: 27-October 04 From: Paso Robles, Ca. Member No.: 3,016 Region Association: Central California |
need another one. Please put me down for one. Thanks Mark.
|
seanery |
Sep 28 2009, 12:29 AM
Post
#7
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,854 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
I'd be in for 1 maybe 2...will these fit flared cars the same?
|
racerbvd |
Sep 28 2009, 12:52 AM
Post
#8
|
Advanced Member Group: Members Posts: 2,368 Joined: 3-February 03 From: Sunny FL. Member No.: 226 Region Association: None |
yes Sir!!!!! Peaseput me in line...
|
Mikey914 |
Sep 28 2009, 01:07 AM
Post
#9
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
|
Gint |
Sep 28 2009, 07:09 AM
Post
#10
|
Mike Ginter Group: Admin Posts: 16,082 Joined: 26-December 02 From: Denver CO. Member No.: 20 Region Association: Rocky Mountains |
I might as well get one to match the front eh? Sign me up Mark.
|
Kansas 914 |
Sep 28 2009, 07:48 AM
Post
#11
|
Advanced Member Group: Members Posts: 2,999 Joined: 1-March 03 From: Durango, Colorado Member No.: 373 Region Association: Rocky Mountains |
For those of you that hjave been following the production of the rear tops, I have finally got all the bugs worked out. I kept having the interal stainless structure blow into the top edge at the licence plate wells. I'm having to play with the water jet cutter to make the shape I need to make this work correctly. These do have the suport running from the edge mounts through the center mount so the section will not droop where the licence plate goes. Prepurchase price will be $262+ shipping, shipping should be in the mid 20's depending on how far from Oregon you are. But the will travel Fedex Home delivery insured. After the run is started these will go to $286 Who needs one? Don't need money now, just a list of those that will be needing them, I'll forward out the payment specifics later. Hi Mark, Put me down for one and thanks for the email - I missed this thread on the forum. Cheers! |
type47 |
Sep 28 2009, 08:11 AM
Post
#12
|
Viermeister Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region |
I would like one. Thanks!
|
kconway |
Sep 28 2009, 08:22 AM
Post
#13
|
Senior Member Group: Members Posts: 1,347 Joined: 6-December 04 From: Monrovia, CA Member No.: 3,231 Region Association: Southern California |
I'll take one.
Kev |
Rotary'14 |
Sep 28 2009, 09:13 AM
Post
#14
|
Senior Member Group: Members Posts: 753 Joined: 24-April 05 From: Los Angeles Member No.: 3,977 |
Hi Mark,,,
Great product! Put me down for one of these too. -Rob |
ConeDodger |
Sep 28 2009, 09:53 AM
Post
#15
|
Apex killer! Group: Members Posts: 23,610 Joined: 31-December 04 From: Tahoe Area Member No.: 3,380 Region Association: Northern California |
I got original new ones about 3 years ago and I have to say, these look exactly the same! Nice work Mike!!!
|
KevinP |
Sep 28 2009, 10:14 AM
Post
#16
|
Member Group: Members Posts: 205 Joined: 16-November 04 From: Orlando,FL Member No.: 3,127 |
Mark,
Put me in for one!!! Thanks, KP |
SUNAB914 |
Sep 28 2009, 12:55 PM
Post
#17
|
Senior Member Group: Members Posts: 698 Joined: 29-December 08 From: Fredericksburg VA Member No.: 9,880 Region Association: South East States |
Are you still selling the front ones, if so how much?
Thanks |
maxwelj |
Sep 28 2009, 01:16 PM
Post
#18
|
rebuilt member Group: Benefactors Posts: 278 Joined: 8-January 04 From: Owasso, OK Member No.: 1,532 Region Association: None |
Please sign me up for 1!
Thnx |
Socalandy |
Sep 28 2009, 01:33 PM
Post
#19
|
Its got to be Yellow!!! Group: Members Posts: 2,432 Joined: 29-August 09 From: Orange Member No.: 10,742 Region Association: Southern California |
One please
Thanks!!! |
Mikey914 |
Sep 29 2009, 01:03 AM
Post
#20
|
The rubber man Group: Members Posts: 12,677 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Are you still selling the front ones, if so how much? Thanks Yes I am. I have them listed in member vendors, and on the original thread. http://www.914world.com/bbs2/index.php?sho...c=94554&hl= Thread http://www.914world.com/bbs2/index.php?showtopic=91029 Member vendor's section with seal prices too. PM me if you need more info, there's alot of info on the thread. Thanks, Mark AKA Mikey914 |
Lo-Fi Version | Time is now: 6th June 2024 - 03:55 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |