![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
blitZ |
![]()
Post
#1
|
Beer please... ![]() ![]() ![]() ![]() Group: Members Posts: 2,223 Joined: 31-August 05 From: Lawrenceville, GA Member No.: 4,719 Region Association: South East States ![]() |
Does anyone know where to get some replacements for our tiny dJet connectors? I did some googling with no luck. I'm looking for the female ends to patch some bad wiring, just need the metal pieces.
|
type47 |
![]()
Post
#2
|
Viermeister ![]() ![]() ![]() ![]() Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region ![]() |
I found some of the small female spade connectors at a specialty electronics store and Radio Shack.
|
McMark |
![]()
Post
#3
|
914 Freak! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Retired Admin Posts: 20,179 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None ![]() |
(IMG:style_emoticons/default/confused24.gif) Special multi-pin connectors? Or just normal spades?
|
blitZ |
![]()
Post
#4
|
Beer please... ![]() ![]() ![]() ![]() Group: Members Posts: 2,223 Joined: 31-August 05 From: Lawrenceville, GA Member No.: 4,719 Region Association: South East States ![]() |
The small ones which go to every dJet connection. I just want some fresh metal pieces when I repair some wiring and slide back into the plastic holders. |
dr914@autoatlanta.com |
![]()
Post
#5
|
914 Guru ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,898 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None ![]() |
|
Tom_T |
![]()
Post
#6
|
TMI.... ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 8,318 Joined: 19-March 09 From: Orange, CA Member No.: 10,181 Region Association: Southern California ![]() ![]() |
(IMG:style_emoticons/default/agree.gif)
... &/or try Jeff Bowlsby, as he gets them for his harness restorations somewhere! |
Dave_Darling |
![]()
Post
#7
|
914 Idiot ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 14,991 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California ![]() ![]() |
Rat Shack and possibly Worldpack distributors will have 1/8" barbed female spade connectors. Those are used in the injector plugs, the plug for the throttle switch, and a number of others.
Well, actually 3mm connectors are used. 1/8" is close but not quite perfect. I think I did get some 3mm ones at a different specialty place whose name now escapes me... The 4-pin connector at the relay board uses 6mm barbed female spade connectors. I got some of those from VDO in a wiring kit or some such. You can get 1/4" ones (close to 6mm but not exact) at Rat Shack and other places. --DD |
MrKona |
![]()
Post
#8
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 597 Joined: 25-July 05 From: Santa Rosa, CA Member No.: 4,469 Region Association: None ![]() |
You could try Vehicle Wiring Products in the UK.
http://www.vehicle-wiring-products.eu/VWP-...oninsblades.php I've ordered from them before. They have a great selection of metric components and shipping was only about $10 from the UK, pretty fast too. |
Tom |
![]()
Post
#9
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,139 Joined: 21-August 05 From: Port Orchard, WA 98367 Member No.: 4,626 Region Association: None ![]() |
rallylights.com 2.8 mm receptacle pt# HJ87271 box of 50 @ $14.00.
Susquehanna MotorSports Tom |
blitZ |
![]()
Post
#10
|
Beer please... ![]() ![]() ![]() ![]() Group: Members Posts: 2,223 Joined: 31-August 05 From: Lawrenceville, GA Member No.: 4,719 Region Association: South East States ![]() |
Good suggestions, I'll try Fry's and the Rat Shack. I was hoping to find some with the little metal strip to clip it back into the socket.
Thanks |
Tom |
![]()
Post
#11
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,139 Joined: 21-August 05 From: Port Orchard, WA 98367 Member No.: 4,626 Region Association: None ![]() |
These do have the clip in back. The last time I ordered, they were on back order from Germany. The FI harness also uses other sizes. I got a few of all of the ones they carry to make sure I had some spares.
Tom |
blitZ |
![]()
Post
#12
|
Beer please... ![]() ![]() ![]() ![]() Group: Members Posts: 2,223 Joined: 31-August 05 From: Lawrenceville, GA Member No.: 4,719 Region Association: South East States ![]() |
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 13th June 2024 - 01:17 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |