 Help, can’t remove crankshaft from case half, Tips for breaking loose?? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| dfelz |
 Dec 6 2020, 09:44 PM
Post
#1
|
|
beach bum  Group: Members Posts: 419 Joined: 7-June 12 From: San Diego Member No.: 14,538 Region Association: Southern California 
 |
Just split my case, trying to pull the crankshaft from the case half but on the flywheel mounting side it does not want to budge at all from the case! The impeller side is free, but all my efforts of trying to break free the other side did not prevail. Even tried turning the case upside down, with helper holding the crank from the bottom, and me giving some good wacks with the rubber mallet to the top of the piston rod closest to the flywheel from the top, hoping gravity would help, but that still didn’t work... anyone else come across a tight crank that would separate??
  |
   |
 
|
Posts in this topic
dfelz Help, can’t remove crankshaft from case half Dec 6 2020, 09:44 PM
iankarr Better I think to tap the flywheel bolts than the ... Dec 6 2020, 09:50 PM
dfelz
Better I think to tap the flywheel bolts than the... Dec 6 2020, 10:03 PM r_towle you are not hitting it hard enough.
Maybe use a h... Dec 6 2020, 10:42 PM infraredcalvin Pick up the impeller side, wiggle it upwards to br... Dec 7 2020, 01:09 AM dfelz Thanks for the replies guys. Sounds like I need to... Dec 7 2020, 02:06 AM wattele Mount the flywheel again and try hard tapping on t... Dec 7 2020, 02:19 AM barefoot Why not just put int back together, looks like the... Dec 7 2020, 05:46 AM wndsrfr
Why not just put int back together, looks like th... Dec 7 2020, 07:08 AM dfelz
Why not just put int back together, looks like t... Dec 8 2020, 03:39 AM Shivers Pull it apart, now you need to know why it is not ... Dec 8 2020, 09:03 AM porschetub Did you get the crank out ? suspect with a linebor... Dec 9 2020, 05:49 PM dfelz
Did you get the crank out ? suspect with a linebo... Dec 10 2020, 10:14 AM 930cabman Why did the engine require disassembly?
I am tryi... Jan 20 2021, 05:37 PM euro911 Detectives are always trying to crack the case ope... Jan 20 2021, 06:28 PM 930cabman
Detectives are always trying to crack the case op... Jan 20 2021, 06:39 PM dfelz I had a valve spring break, and couldn’t find a ... Jan 21 2021, 08:09 PM 930cabman A piece of the valve spring is missing? where coul... Jan 24 2021, 02:10 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th June 2024 - 05:48 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.