Original Markings |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914/4: 70 71 72 73 74 75 76 914/6: 70 71 72
Original Markings |
AvalonFal |
Jun 17 2007, 09:10 AM
Post
#1
|
Member Group: Members Posts: 483 Joined: 3-July 05 From: Southern New Jersey Coast Member No.: 4,367 Region Association: MidAtlantic Region |
Don't think this has been asked before but what's proper with the original manufacturing/assembly markings when doing a restoration. For example, the engine tin and rear control arms painted number markings. Should they be painted over and then somehow replicated new?? Or masked out and painted around them??
|
Pat Garvey |
Jun 17 2007, 08:57 PM
Post
#2
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
Don't think this has been asked before but what's proper with the original manufacturing/assembly markings when doing a restoration. For example, the engine tin and rear control arms painted number markings. Should they be painted over and then somehow replicated new?? Or masked out and painted around them?? Whewhh! Man, you have asked the $64K question. It's been addressed for the engine tin (with no resolution!), a well as some other parts, but never concerning the control arms. The general consensus is that ......we have no idea what the purpose was & no way to determine if one marking is appropriate or not! We've beaten this topic to death! Called in for responses from all the "greats". Gotten nothing of substance. Think they were some kind of inventory control mechanism, but it's only conjecture. Think they were applied with crude rubber or wooden stamps, but only conjecture. We really have no idea. It's one of the wierd things that has eluded us. Unfortunately, the "guys on the line" are either dead or senile. I think we may never know. For my money, I'd refinish over them. If you mask out around them, it will probably show. If you try to replicate them, they may not be the proper finish to suit a high level judge. I don't think there's any way to win this. I know what my numbers WERE, but not they're purpose. Gave up tryingto figure it out after 15 years - painted over them. |
curtis |
Jun 17 2007, 09:13 PM
Post
#3
|
Member Group: Members Posts: 192 Joined: 14-June 04 From: Redlands,CA. Member No.: 2,206 |
the stamp on the trailing arms means "OK". The circle with the K in the middle meaning that it was inspected QAed by someone on the assembly line.
|
Pat Garvey |
Jun 21 2007, 06:28 PM
Post
#4
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
the stamp on the trailing arms means "OK". The circle with the K in the middle meaning that it was inspected QAed by someone on the assembly line. OK, sounds logical. But....what's your source for this info? Not trying to be negative, but there are a bunch of people who've been attempting to find the meaning of these marks. Got a source of info? Because we'd all love to talk to that person! Need to get it right, or forget about it, because judges will ask. Pat |
pin31 |
Jun 21 2007, 07:59 PM
Post
#5
|
Member Group: Members Posts: 398 Joined: 30-January 07 From: Newport, Rhode Island Member No.: 7,492 Region Association: North East States |
Here's what I think:
If you restore a part (i.e. paint) the QA marking should be missing (after all you re-painted and Fritz was not there to stamp it). Original always trumps restore. |
1970 Neun vierzehn |
Jun 21 2007, 08:10 PM
Post
#6
|
Advanced Member Group: Members Posts: 3,199 Joined: 16-March 06 From: cincinnati, ohio Member No.: 5,727 |
Here's what I think: If you restore a part (i.e. paint) the QA marking should be missing (after all you re-painted and Fritz was not there to stamp it). Original always trumps restore. I don't think this "trumps" restore...... Attached image(s) |
Johny Blackstain |
Jun 21 2007, 08:28 PM
Post
#7
|
Walnut Elite Stratocaster player Group: Members Posts: 3,434 Joined: 5-December 06 From: The Shenandoah River Member No.: 7,318 Region Association: MidAtlantic Region |
QUOTE Here's what I think: If you restore a part (i.e. paint) the QA marking should be missing (after all you re-painted and Fritz was not there to stamp it). I just found that on the left side of the engine tin & cleaned it up w/ Fantastic. Good to know to leave it alone. (IMG:style_emoticons/default/cool_shades.gif) |
Pat Garvey |
Jun 21 2007, 09:28 PM
Post
#8
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
Here's what I think: If you restore a part (i.e. paint) the QA marking should be missing (after all you re-painted and Fritz was not there to stamp it). Original always trumps restore. Wrong (no slam intended). You've apparently never judged, or paticipated in a national concours event (& I don't mean anything negative - just a learning experience). Because, restored will always trump original, even if it isn't perfect. Why, because it's clean & not cluttered with peeling paint & rust. These cars are "old". Someone please show me a pristine engine bay that hasn't been redone! Please! And when I say redone, I mean ORIGINAL, un-messed with, as it came from the Factory. No spot painting. etc - as it came from the Factory. Someone show me one (in concours condition of course)! Bet I can pick it apart, because I don't believe there are ANY original 914 engine bays left - prove me wrong! Now, as to the QA markings - they can be replicated. But we need proof that they are original AND what te meaning/purpose is. I have no problem with replicating them, if it's documented as to its purpose. Since there appears to be NO documentation as to the engine tin markings, et al, what proof can we supply to a decent concours judge that they are appropriate? Pat |
1970 Neun vierzehn |
Jun 23 2007, 01:18 PM
Post
#9
|
Advanced Member Group: Members Posts: 3,199 Joined: 16-March 06 From: cincinnati, ohio Member No.: 5,727 |
QUOTE(Pat Garvey @ Jun 21 2007) Since there appears to be NO documentation as to the engine tin markings, et al, what proof can we supply to a decent concours judge that they are appropriate? Pat A picture is worth a hundred words....... Attached image(s) |
IronHillRestorations |
Jun 23 2007, 07:20 PM
Post
#10
|
I. I. R. C. Group: Members Posts: 6,716 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None |
I just recently saw one of these white paint markings/stamp on a fuel tank.
|
Pat Garvey |
Jun 23 2007, 08:19 PM
Post
#11
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
QUOTE(Pat Garvey @ Jun 21 2007) Since there appears to be NO documentation as to the engine tin markings, et al, what proof can we supply to a decent concours judge that they are appropriate? Pat A picture is worth a hundred words....... And your point is.............? |
type47fan |
Jun 27 2007, 12:05 AM
Post
#12
|
It Looks Better In Person. . . Group: Members Posts: 860 Joined: 17-September 03 From: Carlsbad, CA Member No.: 1,170 Region Association: Southern California |
the stamp on the trailing arms means "OK". The circle with the K in the middle meaning that it was inspected QAed by someone on the assembly line. OK! Attached image(s) |
Eric_Shea |
Oct 5 2016, 02:57 PM
Post
#13
|
PMB Performance Group: Admin Posts: 19,274 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
|
22truckie |
Dec 5 2016, 06:41 AM
Post
#14
|
Newbie Group: Members Posts: 45 Joined: 23-June 16 From: Lake Stevens WA Member No.: 20,138 Region Association: None |
Pat, beg to differ. Restored does not always trump original in concours judging and I have been a national judge and national concours judge (not Porsche though). Depends on the class. Preservation classes you would be wrong. Go to Pebble or Amelia Island or Bloomington Gold. You touch the car other than a basic detailed cleaning ( no surface alteration, just cleaning) and points are deducted. You make it sound like all unrestored cars are rusty dirty with pealing paint. If that is your true impression I question your concours judging (no offense). My cars have been in numerous high level concours events, they are unrestored, impeccably clean, no rust or chipping paint, 99% factory original. They have placed in class every time. The last national show I did my car got first in class against perfectly restored cars over $350,000. Two of the judges were from Pebble. They stated the condition of the car and being untouched ,not the rarity (1 of 400) caused the car to get first. It had been driven 97,000 miles as well. I will include a couple of pictures to show you that original cars can be in excellent conditions and in fact can and do beat pristine restored cars. There are concourse Preservation Class engine compartments out there. When I am done cleaning mine, mine will be one of them as well. Just remember. If it was not for the unrestored cars you would have no idea how they should look. Perfect concours cars and preservation cars are apples and oranges. Both have their place and following so I feel your comments are a little out of place (sorry). Just remember one thing. You can spend a million dollars on a restoration and still not have what a very nice unrestored car has. Authenticty. I do not put down pristine restored cars. I just defend the real ones
|
22truckie |
Dec 6 2016, 09:30 AM
Post
#15
|
Newbie Group: Members Posts: 45 Joined: 23-June 16 From: Lake Stevens WA Member No.: 20,138 Region Association: None |
Sorry. Added duplicate photo. Let me try again!
Attached thumbnail(s) |
pete000 |
Feb 16 2017, 03:50 PM
Post
#16
|
Senior Member Group: Members Posts: 1,885 Joined: 23-August 10 From: Bradenton Florida Member No.: 12,094 Region Association: South East States |
Saw this in a classified ad...
Attached thumbnail(s) |
Lo-Fi Version | Time is now: 8th May 2024 - 12:02 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |